Skip to contentSkip to conversation

Failing to compile Yocto (acl package)

DISCUSSION Pedro Sanchez 3 participants 7 messages Dec 27, 2010 – Dec 28, 2010

lore
Share & tools
lore
#0 lore raw

Hello,

I'm trying to compile Yocto from sources as described in the quick start documentation but the build fails as follows:

$ wget http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
$ tar xjf poky-laverne-4.0.tar.bz2
$ (edited conf/local.conf to select qemuarm)
$ source poky-laverne-4.0/poky-init-build-env poky-4.0-build
$ bitbake poky-image-minimal

... (30 minutes of work)

NOTE: package acl-2.2.49-r0: task do_fetch: Succeeded
NOTE: Running task 582 of 1621 (ID: 1261, /home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack)
NOTE: package acl-2.2.49-r0: task do_unpack: Started
NOTE: Unpacking /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to /home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49-r0/
ERROR: Task failed:
NOTE: package acl-2.2.49-r0: task do_unpack: Failed
ERROR: Task 1261 (/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack) failed with 1
ERROR: '/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb' failed

I tried compiling the Laverne branch on a cloned Poky git repo. It also fails when processing the acl package. Any workarounds? Is there any log file I can look at for more details?

Thanks,

Signature · 5 lines
Pedro


-- 
Pedro
#1 lore raw
Quoted 23 lines · Pedro Sanchez

Hello,

I'm trying to compile Yocto from sources as described in the quick start documentation but the build fails as follows:

$ wget http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
$ tar xjf poky-laverne-4.0.tar.bz2
$ (edited conf/local.conf to select qemuarm)
$ source poky-laverne-4.0/poky-init-build-env poky-4.0-build
$ bitbake poky-image-minimal

... (30 minutes of work)

NOTE: package acl-2.2.49-r0: task do_fetch: Succeeded
NOTE: Running task 582 of 1621 (ID: 1261, /home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack)
NOTE: package acl-2.2.49-r0: task do_unpack: Started
NOTE: Unpacking /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to /home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49-r0/
ERROR: Task failed:
NOTE: package acl-2.2.49-r0: task do_unpack: Failed
ERROR: Task 1261 (/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack) failed with 1
ERROR: '/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb' failed

Quoted 1 line

I tried compiling the Laverne branch on a cloned Poky git repo. It also fails when processing the acl package. Any workarounds? Is there any log file I can look at for more details?

You can find log files in the build directory with a relative path like .../tmp/work/*/acl*/temp

In particular, look at the log.do_unpack file for clues

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#2 lore raw
Quoted 35 lines · Gary Thomas
Quoted 34 lines · Pedro Sanchez

Hello,

I'm trying to compile Yocto from sources as described in the quick start documentation but the build fails as follows:

$ wget
http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
$ tar xjf poky-laverne-4.0.tar.bz2
$ (edited conf/local.conf to select qemuarm)
$ source poky-laverne-4.0/poky-init-build-env poky-4.0-build
$ bitbake poky-image-minimal

... (30 minutes of work)

NOTE: package acl-2.2.49-r0: task do_fetch: Succeeded
NOTE: Running task 582 of 1621 (ID: 1261, /home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack)
NOTE: package acl-2.2.49-r0: task do_unpack: Started
NOTE: Unpacking /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to /home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49-r0/

ERROR: Task failed:
NOTE: package acl-2.2.49-r0: task do_unpack: Failed
ERROR: Task 1261 (/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack) failed with 1
ERROR:
'/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb' failed

Quoted 9 lines
Quoted 3 lines

I tried compiling the Laverne branch on a cloned Poky git repo. It also fails when processing the acl package. Any workarounds? Is there any log file I can look at for more details?

You can find log files in the build directory with a relative path like .../tmp/work/*/acl*/temp

In particular, look at the log.do_unpack file for clues

Thanks,

This is what I see:

$ cat armv5te-poky-linux-gnueabi/acl-2.2.49-r0/temp/log.do_unpack
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
NOTE: Unpacking /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to /home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49-r0/
ERROR: Task failed:
$ file poky-4.0-build/downloads/acl-2.2.49.src.tar.gz
poky-4.0-build/downloads/acl-2.2.49.src.tar.gz: HTML document text

The mirror where bb is configured to get acl from, mirror.cinquix.com, is down. I'll try to get it from the Savannah site.

Thanks again,

Signature · 1 line
Pedro
#3 lore raw
Quoted 65 lines

From: Pedro Sanchez
Sent: Tuesday, December 28, 2010 8:10 AM

Quoted 16 lines · Gary Thomas
Quoted 15 lines · Pedro Sanchez

Hello,

I'm trying to compile Yocto from sources as described in the quick start documentation but the build fails as follows:

$ wget
http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
$ tar xjf poky-laverne-4.0.tar.bz2
$ (edited conf/local.conf to select qemuarm)
$ source poky-laverne-4.0/poky-init-build-env poky-4.0-build
$ bitbake poky-image-minimal

... (30 minutes of work)

Quoted 8 lines
Quoted 8 lines

NOTE: package acl-2.2.49-r0: task do_fetch: Succeeded
NOTE: Running task 582 of 1621 (ID: 1261, /home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack)
NOTE: package acl-2.2.49-r0: task do_unpack: Started
NOTE: Unpacking /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to

/home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49 -r0/

Quoted 11 lines
Quoted 11 lines

ERROR: Task failed:
NOTE: package acl-2.2.49-r0: task do_unpack: Failed
ERROR: Task 1261 (/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack) failed with 1
ERROR:
'/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb' failed

Quoted 9 lines
Quoted 3 lines

I tried compiling the Laverne branch on a cloned Poky git repo. It also fails when processing the acl package. Any workarounds? Is there any log file I can look at for more details?

You can find log files in the build directory with a relative path like .../tmp/work/*/acl*/temp

In particular, look at the log.do_unpack file for clues

Thanks,

This is what I see:

$ cat armv5te-poky-linux-gnueabi/acl-2.2.49-r0/temp/log.do_unpack
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
NOTE: Unpacking
/home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to
/home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49
-r0/
ERROR: Task failed:
Quoted 6 lines
$ file poky-4.0-build/downloads/acl-2.2.49.src.tar.gz
poky-4.0-build/downloads/acl-2.2.49.src.tar.gz: HTML document text

The mirror where bb is configured to get acl from, mirror.cinquix.com, is down. I'll try to get it from the Savannah site.

yes, it's very likely that the file you downloaded from the mirror is broken. You can either change the SRC_URI in the acl*.bb to the real Savannah link, or download it manually and then copy to the place where DL_DIR in your build/conf/local.conf points to. It doesn't make sense not using Savannah directly. A fix will be sent out soon.

Thanks
Kevin

#4 lore raw
In reply to Pedro Sanchez
Quoted 65 lines

From: Pedro Sanchez
Sent: Tuesday, December 28, 2010 8:10 AM

Quoted 16 lines · Gary Thomas
Quoted 15 lines · Pedro Sanchez

Hello,

I'm trying to compile Yocto from sources as described in the quick start documentation but the build fails as follows:

$ wget
http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
$ tar xjf poky-laverne-4.0.tar.bz2
$ (edited conf/local.conf to select qemuarm)
$ source poky-laverne-4.0/poky-init-build-env poky-4.0-build
$ bitbake poky-image-minimal

... (30 minutes of work)

Quoted 8 lines
Quoted 8 lines

NOTE: package acl-2.2.49-r0: task do_fetch: Succeeded
NOTE: Running task 582 of 1621 (ID: 1261, /home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack)
NOTE: package acl-2.2.49-r0: task do_unpack: Started
NOTE: Unpacking /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to

/home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49 -r0/

Quoted 11 lines
Quoted 11 lines

ERROR: Task failed:
NOTE: package acl-2.2.49-r0: task do_unpack: Failed
ERROR: Task 1261 (/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack) failed with 1
ERROR:
'/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb' failed

Quoted 9 lines
Quoted 3 lines

I tried compiling the Laverne branch on a cloned Poky git repo. It also fails when processing the acl package. Any workarounds? Is there any log file I can look at for more details?

You can find log files in the build directory with a relative path like .../tmp/work/*/acl*/temp

In particular, look at the log.do_unpack file for clues

Thanks,

This is what I see:

$ cat armv5te-poky-linux-gnueabi/acl-2.2.49-r0/temp/log.do_unpack
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
NOTE: Unpacking
/home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to
/home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49
-r0/
ERROR: Task failed:
Quoted 6 lines
$ file poky-4.0-build/downloads/acl-2.2.49.src.tar.gz
poky-4.0-build/downloads/acl-2.2.49.src.tar.gz: HTML document text

The mirror where bb is configured to get acl from, mirror.cinquix.com, is down. I'll try to get it from the Savannah site.

I've sent out the SRC_URI fixes to use correct Savannah site.

BTW, if the mirror site is down, you should still get a correct tar ball from pre-configured poky mirrors (pokylinux.org, ...). Please let's know if those mirrors don't take effect to you.

Thanks
Kevin

#5 lore raw
Quoted 72 lines · Kevin
Quoted 65 lines

From: Pedro Sanchez
Sent: Tuesday, December 28, 2010 8:10 AM

Quoted 16 lines · Gary Thomas
Quoted 15 lines · Pedro Sanchez

Hello,

I'm trying to compile Yocto from sources as described in the quick start documentation but the build fails as follows:

$ wget
http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
$ tar xjf poky-laverne-4.0.tar.bz2
$ (edited conf/local.conf to select qemuarm)
$ source poky-laverne-4.0/poky-init-build-env poky-4.0-build
$ bitbake poky-image-minimal

... (30 minutes of work)

Quoted 8 lines
Quoted 8 lines

NOTE: package acl-2.2.49-r0: task do_fetch: Succeeded
NOTE: Running task 582 of 1621 (ID: 1261, /home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack)
NOTE: package acl-2.2.49-r0: task do_unpack: Started
NOTE: Unpacking /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to

/home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49 -r0/

Quoted 11 lines
Quoted 11 lines

ERROR: Task failed:
NOTE: package acl-2.2.49-r0: task do_unpack: Failed
ERROR: Task 1261 (/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb, do_unpack) failed with 1
ERROR:
'/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb' failed

Quoted 9 lines
Quoted 3 lines

I tried compiling the Laverne branch on a cloned Poky git repo. It also fails when processing the acl package. Any workarounds? Is there any log file I can look at for more details?

You can find log files in the build directory with a relative path like .../tmp/work/*/acl*/temp

In particular, look at the log.do_unpack file for clues

Thanks,

This is what I see:

$ cat armv5te-poky-linux-gnueabi/acl-2.2.49-r0/temp/log.do_unpack
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
NOTE: Unpacking
/home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to
/home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49
-r0/
ERROR: Task failed:
Quoted 6 lines
$ file poky-4.0-build/downloads/acl-2.2.49.src.tar.gz
poky-4.0-build/downloads/acl-2.2.49.src.tar.gz: HTML document text

The mirror where bb is configured to get acl from, mirror.cinquix.com, is down. I'll try to get it from the Savannah site.

Quoted 8 lines

I've sent out the SRC_URI fixes to use correct Savannah site.

BTW, if the mirror site is down, you should still get a correct tar ball from pre-configured poky mirrors (pokylinux.org, ...). Please let's know if those mirrors don't take effect to you.

Thanks
Kevin

First of all thank for the quick fix! My laptop is busy building Yocto now as I write.

As for the poky mirrors, they clearly didn't work for me. The bitbake command just stopped working when it failed to process the acl package. As far as I can say no attempts were made to reach any poky mirrors at all. Is there something we have to do to enable them before compiling the project?

Signature · 1 line
Pedro
#6 lore raw
Quoted 90 lines

From: Pedro Sanchez [mailto:[email protected]]
Sent: Tuesday, December 28, 2010 9:41 AM

Quoted 18 lines · Kevin
Quoted 18 lines

From: Pedro Sanchez
Sent: Tuesday, December 28, 2010 8:10 AM

Quoted 14 lines · Gary Thomas
Quoted 13 lines · Pedro Sanchez

Hello,

I'm trying to compile Yocto from sources as described in the quick start documentation but the build fails as follows:

$ wget
http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
$ tar xjf poky-laverne-4.0.tar.bz2
$ (edited conf/local.conf to select qemuarm)
$ source poky-laverne-4.0/poky-init-build-env poky-4.0-build
$ bitbake poky-image-minimal
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

... (30 minutes of work)

NOTE: package acl-2.2.49-r0: task do_fetch: Succeeded
NOTE: Running task 582 of 1621 (ID: 1261,

/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb,

Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 5 lines

do_unpack)
NOTE: package acl-2.2.49-r0: task do_unpack: Started
NOTE: Unpacking /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to

/home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49

Quoted 6 lines
Quoted 6 lines

-r0/

Quoted 5 lines
Quoted 5 lines

ERROR: Task failed:
NOTE: package acl-2.2.49-r0: task do_unpack: Failed
ERROR: Task 1261

(/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb,

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

do_unpack) failed with 1
ERROR:

'/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb'

Quoted 17 lines
Quoted 17 lines
Quoted 12 lines
Quoted 6 lines

failed

I tried compiling the Laverne branch on a cloned Poky git repo. It also fails when processing the acl package. Any workarounds? Is there any log file I can look at for more details?

You can find log files in the build directory with a relative path like .../tmp/work/*/acl*/temp

In particular, look at the log.do_unpack file for clues

Thanks,

This is what I see:

Quoted 7 lines
Quoted 7 lines
$ cat armv5te-poky-linux-gnueabi/acl-2.2.49-r0/temp/log.do_unpack
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
NOTE: Unpacking
/home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to

/home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49

Quoted 10 lines
Quoted 9 lines

-r0/
ERROR: Task failed:

$ file poky-4.0-build/downloads/acl-2.2.49.src.tar.gz
poky-4.0-build/downloads/acl-2.2.49.src.tar.gz: HTML document text

The mirror where bb is configured to get acl from, mirror.cinquix.com, is down. I'll try to get it from the Savannah site.

Quoted 8 lines

I've sent out the SRC_URI fixes to use correct Savannah site.

BTW, if the mirror site is down, you should still get a correct tar ball from pre-configured poky mirrors (pokylinux.org, ...). Please let's know if those mirrors don't take effect to you.

Thanks
Kevin

Quoted 9 lines

First of all thank for the quick fix! My laptop is busy building Yocto now as I write.

As for the poky mirrors, they clearly didn't work for me. The bitbake command just stopped working when it failed to process the acl package. As far as I can say no attempts were made to reach any poky mirrors at all. Is there something we have to do to enable them before compiling the project?

the mirror is only reached if there's no response from original SRC_URI link. In your case, the original link does work... which however provides a broken tar ball. From poky p.o.v, the do_fetch task succeeds and thus no attempt is made from those mirrors.

If you manually remove acl* from your DL_DIR, you should be able to observe the mirror effect since now the site is down and no response. Remember to remove previous download, or else poky will always first grab from local DL_DIR instead of pulling from external. :-)

Thanks
Kevin