Skip to contentSkip to conversation

ath9k and stuck xmit queue?

DISCUSSION Ben Greear 1 participant 2 messages Jan 5, 2011 – Jan 6, 2011

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

I added a patch to my tree to print out some extra info, in particular the 'axq-stopped' bit. I notice that when I have 60 STA interfaces sometimes it seems to get stuck and cannot send any data. A printout of the debug in that case is below.

This is from today's wireless-testing (2.6.37-rc8)

[root@lec2010-ath9k-1 ~]# cat /debug/ieee80211/wiphy0/ath9k/xmit
BE BK VI VO

MPDUs Queued:             1534          0         0      8949
MPDUs Completed:          1534          0         0      8949
Aggregates:                 90          0         0         0
AMPDUs Queued:            1544          0         0         0
AMPDUs Completed:          896          0         0         0
AMPDUs Retried:             90          0         0         0
AMPDUs XRetried:             0          0         0         0
FIFO Underrun:               0          0         0         0
TXOP Exceeded:               0          0         0         0
TXTIMER Expiry:              0          0         0         0
DESC CFG Error:              0          0         0         0
DATA Underrun:               0          0         0         0
DELIM Underrun:              0          0         0         0
TX-Pkts-All:              2430          0         0      8949
TX-Bytes-All:          1473128          0         0    288734
axq-qnum:                    2          3         1         0
axq-depth:                   0          0         0         0
axq-stopped                  1          0         0         0
tx-in-progress               0          0         0         0
pending-frames             396          0         0         0

A minute or two later and it seems to recover, and traffic starts going again. I'm curious if anyone has any clues as to where the problem might lie based on the output above.

[root@lec2010-ath9k-1 ~]# cat /debug/ieee80211/wiphy0/ath9k/xmit
BE BK VI VO

MPDUs Queued:             1940          0         0     10360
MPDUs Completed:          1940          0         0     10360
Aggregates:                 95          0         0         0
AMPDUs Queued:            1895          0         0         0
AMPDUs Completed:         1153          0         0         0
AMPDUs Retried:             94          0         0         0
AMPDUs XRetried:            64          0         0         0
FIFO Underrun:               0          0         0         0
TXOP Exceeded:               0          0         0         0
TXTIMER Expiry:              0          0         0         0
DESC CFG Error:              0          0         0         0
DATA Underrun:               0          0         0         0
DELIM Underrun:              0          0         0         0
TX-Pkts-All:              3157          0         0     10360
TX-Bytes-All:          2184232          0         0    323587
axq-qnum:                    2          3         1         0
axq-depth:                   0          0         0         0
axq-stopped                  0          0         0         0
tx-in-progress               0          0         0         0
pending-frames              27          0         0         0

...but then it gets stuck again...

[root@lec2010-ath9k-1 ~]# cat /debug/ieee80211/wiphy0/ath9k/xmit
BE BK VI VO

MPDUs Queued:             1943          0         0     12161
MPDUs Completed:          1943          0         0     12161
Aggregates:                 96          0         0         0
AMPDUs Queued:            2289          0         0         0
AMPDUs Completed:         1323          0         0         0
AMPDUs Retried:             94          0         0         0
AMPDUs XRetried:            64          0         0         0
FIFO Underrun:               0          0         0         0
TXOP Exceeded:               0          0         0         0
TXTIMER Expiry:              0          0         0         0
DESC CFG Error:              0          0         0         0
DATA Underrun:               0          0         0         0
DELIM Underrun:              0          0         0         0
TX-Pkts-All:              3330          0         0     12161
TX-Bytes-All:          2369384          0         0    368479
axq-qnum:                    2          3         1         0
axq-depth:                   0          0         0         0
axq-stopped                  1          0         0         0
tx-in-progress               0          0         0         0
pending-frames             248          0         0         0

Thanks,
Ben

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
author
#1 lore raw
Quoted 5 lines · Ben Greear

I added a patch to my tree to print out some extra info, in particular the 'axq-stopped' bit. I notice that when I have 60 STA interfaces sometimes it seems to get stuck and cannot send any data. A printout of the debug in that case is below.

I found a similar scenario, but to me even weirder:

Note that the queue is stopped, but has no depth, and not even any pending frames?

I do notice that the hw-tx-start is less than the number of processed descriptors. That seems to normally go along with the tx-hang issues..perhaps caused by chip resets or similar?

hw-tx-start:             53128          0         0     37325
hw-tx-proc-desc:         53103          0         0     37200
txq-memory-address:   de70b3d0   de70b464  de70b33c  de70b2a8
axq-qnum:                    2          3         1         0
axq-depth:                   0          0         0         0
axq-ampdu_depth:             0          0         0         0
axq-stopped                  1          0         0         0
tx-in-progress               0          0         0         0
pending-frames               0          0         0         0
txq_headidx:                 0          0         0         0
txq_tailidx:                 0          0         0         0
axq_q empty:                   0          1         1         0
axq_acq empty:                 1          1         1         1
txq_fifo_pending:              1          1         1         1
txq_fifo[0] empty:             1          1         1         1
txq_fifo[1] empty:             1          1         1         1
txq_fifo[2] empty:             1          1         1         1
txq_fifo[3] empty:             1          1         1         1
txq_fifo[4] empty:             1          1         1         1
txq_fifo[5] empty:             1          1         1         1
txq_fifo[6] empty:             1          1         1         1
txq_fifo[7] empty:             1          1         1         1

Thanks,
Ben

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com