spi: add support SuperH SPI module

SH7757 has SPI module. This patch supports it.

Signed-off-by Yoshihiro Shimoda <[email protected]>

---
about v3:
- keep list sorted in Makefile
- separate some code to header file
- change hardware registers to C structure

 drivers/spi/Makefile |    1 +
 drivers/spi/sh_spi.c |  261 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/spi/sh_spi.h |   79 +++++++++++++++
 3 files changed, 341 insertions(+), 0 deletions(-)
 create mode 100644 drivers/spi/sh_spi.c
 create mode 100644 drivers/spi/sh_spi.h

drivers/spi/Makefile +1 -0

index e34a124..d582fbb 100644
@@ -37,6 +37,7 @@ COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
 COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
 COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
 COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
+COBJS-$(CONFIG_SH_SPI) += sh_spi.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/spi/sh_spi.c new file +261 -0

new file mode 100644
index 0000000..ba43bec
@@ -0,0 +1,261 @@
+/*
+ * SH SPI driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/io.h>
+#include "sh_spi.h"
+
+static void sh_spi_write(unsigned long data, unsigned long *reg)
+{
+	writel(data, reg);
+}
+
+static unsigned long sh_spi_read(unsigned long *reg)
+{
+	return readl(reg);
+}
+
+static void sh_spi_set_bit(unsigned long val, unsigned long *reg)
+{
+	unsigned long tmp;
+
+	tmp = sh_spi_read(reg);
+	tmp |= val;
+	sh_spi_write(tmp, reg);
+}
+
+static void sh_spi_clear_bit(unsigned long val, unsigned long *reg)
+{
+	unsigned long tmp;
+
+	tmp = sh_spi_read(reg);
+	tmp &= ~val;
+	sh_spi_write(tmp, reg);
+}
+
+static void clear_fifo(struct sh_spi *ss)
+{
+	sh_spi_set_bit(SH_SPI_RSTF, &ss->regs->cr2);
+	sh_spi_clear_bit(SH_SPI_RSTF, &ss->regs->cr2);
+}
+
+static int recvbuf_wait(struct sh_spi *ss)
+{
+	while (sh_spi_read(&ss->regs->cr1) & SH_SPI_RBE) {
+		if (ctrlc())
+			return 1;
+		udelay(10);
+	}
+	return 0;
+}
+
+static int write_fifo_empty_wait(struct sh_spi *ss)
+{
+	while (!(sh_spi_read(&ss->regs->cr1) & SH_SPI_TBE)) {
+		if (ctrlc())
+			return 1;
+		udelay(10);
+	}
+	return 0;
+}
+
+void spi_init(void)
+{
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+		unsigned int max_hz, unsigned int mode)
+{
+	struct sh_spi *ss;
+
+	if (!spi_cs_is_valid(bus, cs))
+		return NULL;
+
+	ss = malloc(sizeof(struct spi_slave));
+	if (!ss)
+		return NULL;
+
+	ss->slave.bus = bus;
+	ss->slave.cs = cs;
+	ss->regs = (struct sh_spi_regs *)CONFIG_SH_SPI_BASE;
+
+	/* SPI sycle stop */
+	sh_spi_write(0xfe, &ss->regs->cr1);
+	/* CR1 init */
+	sh_spi_write(0x00, &ss->regs->cr1);
+	/* CR3 init */
+	sh_spi_write(0x00, &ss->regs->cr3);
+
+	clear_fifo(ss);
+
+	/* 1/8 clock */
+	sh_spi_write(sh_spi_read(&ss->regs->cr2) | 0x07, &ss->regs->cr2);
+	udelay(10);
+
+	return &ss->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	struct sh_spi *spi = to_sh_spi(slave);
+
+	free(spi);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	struct sh_spi *ss = to_sh_spi(slave);
+
+	sh_spi_write(sh_spi_read(&ss->regs->cr1) &
+		~(SH_SPI_SSA | SH_SPI_SSDB | SH_SPI_SSD), &ss->regs->cr1);
+}
+
+static int sh_spi_send(struct sh_spi *ss, const unsigned char *tx_data,
+			unsigned int len, unsigned long flags)
+{
+	int i, cur_len, ret = 0;
+	int remain = (int)len;
+	unsigned long tmp;
+
+	if (len >= SH_SPI_FIFO_SIZE)
+		sh_spi_set_bit(SH_SPI_SSA, &ss->regs->cr1);
+
+	while (remain > 0) {
+		cur_len = (remain < SH_SPI_FIFO_SIZE) ?
+				remain : SH_SPI_FIFO_SIZE;
+		for (i = 0; i < cur_len &&
+			!(sh_spi_read(&ss->regs->cr4) & SH_SPI_WPABRT) &&
+			!(sh_spi_read(&ss->regs->cr1) & SH_SPI_TBF);
+				i++)
+			sh_spi_write(tx_data[i], &ss->regs->tbr_rbr);
+
+		cur_len = i;
+
+		if (sh_spi_read(&ss->regs->cr4) & SH_SPI_WPABRT) {
+			/* Abort the transaction */
+			flags |= SPI_XFER_END;
+			sh_spi_set_bit(SH_SPI_WPABRT, &ss->regs->cr4);
+			ret = 1;
+			break;
+		}
+
+		remain -= cur_len;
+		tx_data += cur_len;
+
+		if (remain > 0)
+			write_fifo_empty_wait(ss);
+	}
+
+	if (flags & SPI_XFER_END) {
+		tmp = sh_spi_read(&ss->regs->cr1);
+		tmp = tmp & ~(SH_SPI_SSD | SH_SPI_SSDB);
+		sh_spi_write(tmp, &ss->regs->cr1);
+		sh_spi_set_bit(SH_SPI_SSA, &ss->regs->cr1);
+		udelay(100);
+		write_fifo_empty_wait(ss);
+	}
+
+	return ret;
+}
+
+static int sh_spi_receive(struct sh_spi *ss, unsigned char *rx_data,
+			  unsigned int len, unsigned long flags)
+{
+	int i;
+	unsigned long tmp;
+
+	if (len > SH_SPI_MAX_BYTE)
+		sh_spi_write(SH_SPI_MAX_BYTE, &ss->regs->cr3);
+	else
+		sh_spi_write(len, &ss->regs->cr3);
+
+	tmp = sh_spi_read(&ss->regs->cr1);
+	tmp = tmp & ~(SH_SPI_SSD | SH_SPI_SSDB);
+	sh_spi_write(tmp, &ss->regs->cr1);
+	sh_spi_set_bit(SH_SPI_SSA, &ss->regs->cr1);
+
+	for (i = 0; i < len; i++) {
+		if (recvbuf_wait(ss))
+			return 0;
+
+		rx_data[i] = (unsigned char)sh_spi_read(&ss->regs->tbr_rbr);
+	}
+	sh_spi_write(0, &ss->regs->cr3);
+
+	return 0;
+}
+
+int  spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+		void *din, unsigned long flags)
+{
+	struct sh_spi *ss = to_sh_spi(slave);
+	const unsigned char *tx_data = dout;
+	unsigned char *rx_data = din;
+	unsigned int len = bitlen / 8;
+	int ret = 0;
+
+	if (flags & SPI_XFER_BEGIN)
+		sh_spi_write(sh_spi_read(&ss->regs->cr1) & ~SH_SPI_SSA,
+				&ss->regs->cr1);
+
+	if (tx_data)
+		ret = sh_spi_send(ss, tx_data, len, flags);
+
+	if (ret == 0 && rx_data)
+		ret = sh_spi_receive(ss, rx_data, len, flags);
+
+	if (flags & SPI_XFER_END) {
+		sh_spi_set_bit(SH_SPI_SSD, &ss->regs->cr1);
+		udelay(100);
+
+		sh_spi_clear_bit(SH_SPI_SSA | SH_SPI_SSDB | SH_SPI_SSD,
+				 &ss->regs->cr1);
+		clear_fifo(ss);
+	}
+
+	return ret;
+}
+
+int  spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	/* This driver supports "bus = 0" and "cs = 0" only. */
+	if (!bus && !cs)
+		return 1;
+	else
+		return 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+
+}
+

drivers/spi/sh_spi.h new file +79 -0

new file mode 100644
index 0000000..b1cf98c
@@ -0,0 +1,79 @@
+/*
+ * SH SPI driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __SH_SPI_H__
+#define __SH_SPI_H__
+
+#include <spi.h>
+
+struct sh_spi_regs {
+	unsigned long tbr_rbr;
+	unsigned long resv1;
+	unsigned long cr1;
+	unsigned long resv2;
+	unsigned long cr2;
+	unsigned long resv3;
+	unsigned long cr3;
+	unsigned long resv4;
+	unsigned long cr4;
+};
+
+/* CR1 */
+#define SH_SPI_TBE	0x80
+#define SH_SPI_TBF	0x40
+#define SH_SPI_RBE	0x20
+#define SH_SPI_RBF	0x10
+#define SH_SPI_PFONRD	0x08
+#define SH_SPI_SSDB	0x04
+#define SH_SPI_SSD	0x02
+#define SH_SPI_SSA	0x01
+
+/* CR2 */
+#define SH_SPI_RSTF	0x80
+#define SH_SPI_LOOPBK	0x40
+#define SH_SPI_CPOL	0x20
+#define SH_SPI_CPHA	0x10
+#define SH_SPI_L1M0	0x08
+
+/* CR3 */
+#define SH_SPI_MAX_BYTE	0xFF
+
+/* CR4 */
+#define SH_SPI_TBEI	0x80
+#define SH_SPI_TBFI	0x40
+#define SH_SPI_RBEI	0x20
+#define SH_SPI_RBFI	0x10
+#define SH_SPI_WPABRT	0x04
+#define SH_SPI_SSS	0x01
+
+#define SH_SPI_FIFO_SIZE	32
+
+struct sh_spi {
+	struct spi_slave	slave;
+	struct sh_spi_regs	*regs;
+};
+
+static inline struct sh_spi *to_sh_spi(struct spi_slave *slave)
+{
+	return container_of(slave, struct sh_spi, slave);
+}
+
+#endif
+

Signature · 6 lines

1.7.1

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Hi,

Please add description of CONFIG_SH_SPI to README.