GMA HD driver support for hardware acceleration
Hi All,
I am a starter in Linux graphics. Our development board is *MATXM*-*CORE*-*411*-*B* from Emerson. It has Intel i5 core and QM57 chip set. We have a a requirement to use the hardware acceleration for various graphics operations such as blit, blend etc.
1)Does the Linux graphics driver for GMA-HD(in our understanding, i915) support hardware acceleration for blit/blend operations?
2)How to test and verify the hardware acceleration for blit/blend operations in GMA-HD platform
Thanks in advance
Regards
Sudeep
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 10 lines · sudeep
Hi All,
I am a starter in Linux graphics. Our development board is *MATXM*-*CORE*-*411*-*B* from Emerson. It has
Intel i5 core and QM57 chip set. We have a a requirement to use the hardware acceleration for various graphics
operations such as blit, blend etc.
1)Does the Linux graphics driver for GMA-HD(in our understanding, i915) support hardware acceleration for
blit/blend operations?
Yes. Though the BLT engine (the blitter) can not do alpha blend nor scaling, it is a pure bitblt. To do alpha blending and other "advance" blits, you need to use the 3D pipeline (as on all previous genX). Ideally you would use GL.
Quoted 2 lines
2)How to test and verify the hardware acceleration for blit/blend operations in GMA-HD platform
The hardware contains a couple of register to show GPU activity. These are exposed in intel-gpu-tools/tool/intel_gpu_top, which shows how busy the GPU is. Assuming that tracing the actual emission of GPU commands doesn't convince you that the operations are being performed on the GPU. -Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Thanks a lot Chris. Thanks for your valuable inputs.
Sudeep
Quoted 17 lines · Chris Wilson
Quoted 8 lines · sudeep
Hi All,
I am a starter in Linux graphics. Our development board is *MATXM*-*CORE*-*411*-*B* from Emerson. It has Intel i5 core and QM57 chip set. We have a a requirement to use the hardware acceleration for various graphics operations such as blit, blend etc.
1)Does the Linux graphics driver for GMA-HD(in our understanding, i915) support hardware acceleration for blit/blend operations?Yes. Though the BLT engine (the blitter) can not do alpha blend nor scaling, it is a pure bitblt. To do alpha blending and other "advance" blits, you need to use the 3D pipeline (as on all previous genX). Ideally you would use GL.
Quoted 10 lines
Quoted 2 lines
2)How to test and verify the hardware acceleration for blit/blend operations in GMA-HD platform
The hardware contains a couple of register to show GPU activity. These are exposed in intel-gpu-tools/tool/intel_gpu_top, which shows how busy the GPU is. Assuming that tracing the actual emission of GPU commands doesn't convince you that the operations are being performed on the GPU. -Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx