ahci: recognize Marvell 88se9125 PCIe SATA 6.0 Gb/s controller
PATCH 1/1 ahci: recognize Marvell 88se9125 PCIe SATA 6.0 Gb/s controller
Hi Jeff
Below is a minor patch for drivers/ata/ahci.c for recognising Marvell 88SE9125 PCIe SATA 6.0 Gb/s controller as found on the RocketRaid 62X controller series. I have also submitted updates to pci-ids.
drivers/ata/ahci.c 2011-02-01 14:01:00.380977830 +0100 renamed from drivers/ata/ahci.c 2011-02-02 14:55:16.514999946 +0100 +2 -0
@@ -380,6 +380,8 @@ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ { PCI_DEVICE(0x1b4b, 0x9123), .driver_data = board_ahci_yes_fbs }, /* 88se9128 */ + { PCI_DEVICE(0x1b4b, 0x9125), + .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ /* Promise */
Hello.
Quoted 1 line · Per Jessen
Hi Jeff
This shouldn't be the part of the changelog.
Quoted 10 lines
Below is a minor patch for
drivers/ata/ahci.cfor recognising Marvell 88SE9125 PCIe SATA 6.0 Gb/s controller as found on the RocketRaid 62X controller series. I have also submitted updates to pci-ids.Signed-off-by Per Jessen <[email protected]>drivers/ata/ahci.c 2011-02-01 14:01:00.380977830 +0100 renamed from drivers/ata/ahci.c 2011-02-02 14:55:16.514999946 +0100 +0
-0@@ -380,6 +380,8 @@
Quoted 5 lines
{
PCI_VDEVICE(MARVELL, 0x6121),board_ahci_mv}, /* 6121 */ {PCI_DEVICE(0x1b4b, 0x9123),
.driver_data =board_ahci_yes_fbs}, /* 88se9128 */
+ {PCI_DEVICE(0x1b4b, 0x9125),
+ .driver_data =board_ahci_yes_fbs}, /* 88se9125 */
Your patch has spaces instead of all tabs.
WBR, Sergei