MIPS patches

GIT PULL Applied Shinya Kuribayashi 2 participants 2 messages Feb 12, 2011

Subsystems (2)

Kbuild Arm/actions semi architecture

lore

Share & tools

lore

Shinya Kuribayashi

author

2011-02-12 05:10 UTC #0 lore raw

Hi,

Please pull the following MIPS patches, thanks.

Daniel Schwierzeck (3):
MIPS: VCT: Fix enabling of unwanted options if networking or USB support are disabled
MIPS: Purple: Fix multiple definition error on final linking of u-boot binary
MIPS: dbau1x00: Remove unused flash driver stub

Shinya Kuribayashi (5):
cmd_ide: Fix an unused CONFIG_AU1X00 symbol to work as intended
MIPS: Move Alchemy Au1x00 based boards to boards.cfg
MIPS: Move Qemu MIPS target to boards.cfg
MIPS: Move Inca-IP targets to boards.cfg
MIPS: Move VCT boards to boards.cfg

 Makefile                     |   89 ------------------------------------------
 board/dbau1x00/Makefile      |    2 +-
 board/dbau1x00/flash.c       |   43 --------------------
 board/incaip/lowlevel_init.S |    2 +-
 board/purple/u-boot.lds      |    5 --
 boards.cfg                   |   24 +++++++++++
 common/cmd_ide.c             |    3 +-
 include/configs/incaip.h     |    9 +++-
 include/configs/vct.h        |    7 ++-
 9 files changed, 39 insertions(+), 145 deletions(-)
 delete mode 100644 board/dbau1x00/flash.c

Makefile +0 ~~-89~~

index 05b404d..6133160 100644
@@ -1092,95 +1092,6 @@ smdk6400_config	:	unconfig
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
 #========================================================================
-# MIPS
-#========================================================================
-#########################################################################
-## MIPS32 4Kc
-#########################################################################
-
-incaip_100MHz_config	\
-incaip_133MHz_config	\
-incaip_150MHz_config	\
-incaip_config: unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _100MHz,$@)" ] || \
-		echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h
-	@[ -z "$(findstring _133MHz,$@)" ] || \
-		echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h
-	@[ -z "$(findstring _150MHz,$@)" ] || \
-		echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a incaip mips mips incaip
-
-vct_premium_config		\
-vct_premium_small_config	\
-vct_premium_onenand_config	\
-vct_premium_onenand_small_config \
-vct_platinum_config		\
-vct_platinum_small_config	\
-vct_platinum_onenand_config	\
-vct_platinum_onenand_small_config \
-vct_platinumavc_config		\
-vct_platinumavc_small_config	\
-vct_platinumavc_onenand_config	\
-vct_platinumavc_onenand_small_config: unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _premium,$@)" ] || \
-		echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h
-	@[ -z "$(findstring _platinum_,$@)" ] || \
-		echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h
-	@[ -z "$(findstring _platinumavc,$@)" ] || \
-		echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h
-	@[ -z "$(findstring _onenand,$@)" ] || \
-		echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h
-	@[ -z "$(findstring _small,$@)" ] || \
-		echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h
-	@$(MKCONFIG)  -n $@ -a vct mips mips vct micronas
-
-#########################################################################
-## MIPS32 AU1X00
-#########################################################################
-
-dbau1000_config		:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-dbau1100_config		:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-dbau1500_config		:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-dbau1550_config		:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-dbau1550_el_config	:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-
-gth2_config		:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a $@ mips mips gth2
-
-pb1000_config		:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a pb1x00 mips mips pb1x00
-
-qemu_mips_config	: unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
-
-#========================================================================
 # Nios
 #========================================================================

board/dbau1x00/Makefile +1 -1

index f1594a2..e36a9d2 100644
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o flash.o
+COBJS	= $(BOARD).o
 SOBJS	= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)

board/dbau1x00/flash.c deleted +0 ~~-43~~

43 lines not on this page · raw message

board/incaip/lowlevel_init.S +1 -1

index fe525ec..b765795 100644
@@ -283,7 +283,7 @@ lowlevel_init:
 
 	/* EBU, CGU and SDRAM Initialization.
 	 */
-	li	a0, CPU_CLOCK_RATE
+	li	a0, CONFIG_CPU_CLOCK_RATE
 	move	t0, ra
 
 	/* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init()

board/purple/u-boot.lds +0 -5

index 542601a..719f268 100644
@@ -36,11 +36,6 @@ SECTIONS
 	{
 	  arch/mips/cpu/start.o		(.text)
 	  board/purple/lowlevel_init.o	(.text)
-	  arch/mips/cpu/cache.o		(.text)
-	  common/main.o			(.text)
-	  common/dlmalloc.o		(.text)
-	  common/cmd_boot.o		(.text)
-	  lib/zlib.o		(.text)
 	  . = DEFINED(env_offset) ? env_offset : .;
 	  common/env_embedded.o	(.ppcenv)

boards.cfg +24 -0

index c977528..b8369e1 100644
@@ -213,8 +213,32 @@ M5282EVB                     m68k        mcf52x2     m5282evb            freesca
 M53017EVB                    m68k        mcf52x2     m53017evb           freescale
 EP2500                       m68k        mcf52x2     ep2500              Mercury
 microblaze-generic           microblaze  microblaze  microblaze-generic  xilinx
+dbau1000                     mips        mips        dbau1x00            -              -           dbau1x00:DBAU1000
+dbau1100                     mips        mips        dbau1x00            -              -           dbau1x00:DBAU1100
+dbau1500                     mips        mips        dbau1x00            -              -           dbau1x00:DBAU1500
+dbau1550                     mips        mips        dbau1x00            -              -           dbau1x00:DBAU1550
+dbau1550_el                  mips        mips        dbau1x00            -              -           dbau1x00:DBAU1550
+gth2                         mips        mips
+incaip                       mips        mips
+incaip_100MHz                mips        mips        incaip              -              -           incaip:CPU_CLOCK_RATE=100000000
+incaip_133MHz                mips        mips        incaip              -              -           incaip:CPU_CLOCK_RATE=133000000
+incaip_150MHz                mips        mips        incaip              -              -           incaip:CPU_CLOCK_RATE=150000000
+pb1000                       mips        mips        pb1x00              -              -           pb1x00:PB1000
 purple                       mips        mips
+qemu_mips                    mips        mips        qemu-mips           -              -           qemu-mips
 tb0229                       mips        mips
+vct_premium                  mips        mips        vct                 micronas       -           vct:VCT_PREMIUM
+vct_premium_small            mips        mips        vct                 micronas       -           vct:VCT_PREMIUM,VCT_SMALL_IMAGE
+vct_premium_onenand          mips        mips        vct                 micronas       -           vct:VCT_PREMIUM,VCT_ONENAND
+vct_premium_onenand_small    mips        mips        vct                 micronas       -           vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE
+vct_platinum                 mips        mips        vct                 micronas       -           vct:VCT_PLATINUM
+vct_platinum_small           mips        mips        vct                 micronas       -           vct:VCT_PLATINUM,VCT_SMALL_IMAGE
+vct_platinum_onenand         mips        mips        vct                 micronas       -           vct:VCT_PLATINUM,VCT_ONENAND
+vct_platinum_onenand_small   mips        mips        vct                 micronas       -           vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE
+vct_platinumavc              mips        mips        vct                 micronas       -           vct:VCT_PLATINUMAVC
+vct_platinumavc_small        mips        mips        vct                 micronas       -           vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE
+vct_platinumavc_onenand      mips        mips        vct                 micronas       -           vct:VCT_PLATINUMAVC,VCT_ONENAND
+vct_platinumavc_onenand_small mips       mips        vct                 micronas       -           vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE
 PCI5441                      nios2       nios2       pci5441             psyent
 PK1C20                       nios2       nios2       pk1c20              psyent
 EVB64260                     powerpc     74xx_7xx    evb64260            -              -           EVB64260

common/cmd_ide.c +2 -1

index df7bdf5..a1f7e57 100644
@@ -811,7 +811,8 @@ set_pcmcia_timing (int pmode)
 
 /* We only need to swap data if we are running on a big endian cpu. */
 /* But Au1x00 cpu:s already swaps data in big endian mode! */
-#if defined(__LITTLE_ENDIAN) || ( defined(CONFIG_AU1X00) && !defined(CONFIG_GTH2) )
+#if defined(__LITTLE_ENDIAN) || \
+   (defined(CONFIG_SOC_AU1X00) && !defined(CONFIG_GTH2))
 #define input_swap_data(x,y,z) input_data(x,y,z)
 #else
 static void

include/configs/incaip.h +6 -3

index b7ba6f4..f2950e8 100644
@@ -31,9 +31,12 @@
 #define CONFIG_MIPS32		1	/* MIPS 4Kc CPU core	*/
 #define CONFIG_INCA_IP		1	/* on a INCA-IP Board	*/
 
-#ifndef	CPU_CLOCK_RATE
-/* allowed values: 100000000, 133000000, and 150000000 */
-#define CPU_CLOCK_RATE	150000000	/* default: 150 MHz clock for the MIPS core */
+/*
+ * Clock for the MIPS core (MHz)
+ * allowed values: 100000000, 133000000, and 150000000 (default)
+ */
+#ifndef CONFIG_CPU_CLOCK_RATE
+#define CONFIG_CPU_CLOCK_RATE	150000000
 #endif
 
 #define INFINEON_EBU_BOOTCFG	0x40C4	/* CMULT = 8 */

include/configs/vct.h +5 -2

index 4894969..325ac8c 100644
@@ -109,17 +109,20 @@
 /*
  * Only Premium/Platinum have ethernet support right now
  */
-#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
+#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
+	!defined(CONFIG_VCT_SMALL_IMAGE)
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
 #else
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 #endif
 
 /*
  * Only Premium/Platinum have USB-EHCI support right now
  */
-#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
+#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
+	!defined(CONFIG_VCT_SMALL_IMAGE)
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_FAT
 #endif

Wolfgang Denk

Applied

2011-02-12 19:38 UTC #1 lore raw

Dear Shinya Kuribayashi,

Quoted 16 lines · In message <[email protected]> you wrote:

Hi,
Please pull the following MIPS patches, thanks.
Daniel Schwierzeck (3):
MIPS: VCT: Fix enabling of unwanted options if networking or USB support are disabled
MIPS: Purple: Fix multiple definition error on final linking of u-boot binary
MIPS: dbau1x00: Remove unused flash driver stub
Shinya Kuribayashi (5):
cmd_ide: Fix an unused CONFIG_AU1X00 symbol to work as intended
MIPS: Move Alchemy Au1x00 based boards to boards.cfg
MIPS: Move Qemu MIPS target to boards.cfg
MIPS: Move Inca-IP targets to boards.cfg
MIPS: Move VCT boards to boards.cfg

Quoted 11 lines

 Makefile                     |   89 ------------------------------------------
 board/dbau1x00/Makefile      |    2 +-
 board/dbau1x00/flash.c       |   43 --------------------
 board/incaip/lowlevel_init.S |    2 +-
 board/purple/u-boot.lds      |    5 --
 boards.cfg                   |   24 +++++++++++
 common/cmd_ide.c             |    3 +-
 include/configs/incaip.h     |    9 +++-
 include/configs/vct.h        |    7 ++-
 9 files changed, 39 insertions(+), 145 deletions(-)
 delete mode 100644 board/dbau1x00/flash.c

Can you please use "git request-pull" next time?

In any case, please make sure to mention which branch I am supposed to pull from!

I figured you probably mean u-boot-mips.git #master - hope this was correct?

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A fail-safe circuit will destroy others.                 -- Klipstein