Skip to contentSkip to conversation

Add support for Bluewater Systems Snapper9260/9G20 modules

PATCH New Ryan Mallon 2 participants 2 messages Feb 13, 2011 – Feb 14, 2011

lore
Share & tools
lore

Ryan Mallon

author
#0 lore raw

PATCH v4 1/1 Add support for Bluewater Systems Snapper9260/9G20 modules

Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 single board computer modules. Includes NAND flash and Ethernet support.

Signed-off-by Ryan Mallon <[email protected]>

---
Build and run tested with new changes.

Changes for v4:
- Rebased on atmel/rework110202 branch
- Changed text base to 0x20000000 due to new relocation rules.

Changes for v3:
- Replaced SZ_ macros with shifts
- Remove defined values from CONFIG_ defines
- Moved boards.cfg entry to correct place
- Added MAINTAINERS entry

Changes for v2:
- Updated for recent at91 changes
- Use CONFIG_AT91FAMILY in soft_i2c driver
- Fixed missing snapper9260.h config file
- Add config to boards.cfg not Makefile
- Removed config.mk (now in snapper9260.h)
---

MAINTAINERS +5 -0
index 57cd926..0aba463 100644
@@ -301,6 +301,11 @@ Dan Malek <[email protected]>
 	stxssa		MPC85xx
 	stxxtc		MPC8xx
 
+Ryan Mallon <[email protected]>
+
+	snapper9260		ARM926EJS (AT91SAM9260 SoC)
+	snapper9g20		ARM926EJS (AT91SAM9G20 SoC)
+
 Eran Man <[email protected]>
 
 	EVB64260_750CX	MPC750CX
board/bluewater/snapper9260/Makefile new file +53 -0

53 lines not on this page · raw message

board/bluewater/snapper9260/snapper9260.c new file +169 -0

169 lines not on this page · raw message

boards.cfg +2 -0
index 0da32ef..8d15b5b 100644
@@ -82,6 +82,8 @@ at91sam9g20ek_dataflash_cs1  arm         arm926ejs   at91sam9260ek       atmel
 at91sam9xeek_nandflash       arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
 at91sam9xeek_dataflash_cs0   arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
 at91sam9xeek_dataflash_cs1   arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
+snapper9260                  arm         arm926ejs   -                   bluewater      at91        snapper9260:AT91SAM9260
+snapper9g20                  arm         arm926ejs   snapper9260         bluewater      at91        snapper9260:AT91SAM9G20
 top9000eval_xe               arm         arm926ejs   top9000             emk            at91        top9000:EVAL9000
 top9000su_xe                 arm         arm926ejs   top9000             emk            at91        top9000:SU9000
 meesc                        arm         arm926ejs   -                   esd            at91
include/configs/snapper9260.h new file +191 -0

191 lines not on this page · raw message

#1 lore raw

PATCH v4 1/1 Add support for Bluewater Systems Snapper9260/9G20 modules

Le 13/02/2011 21:37, Ryan Mallon a ?crit :

MAINTAINERS

Quoted 27 lines

Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 single board computer modules. Includes NAND flash and Ethernet support.

Signed-off-by Ryan Mallon<[email protected]>

---
Build and run tested with new changes.

Changes for v4:
- Rebased on atmel/rework110202 branch
- Changed text base to 0x20000000 due to new relocation rules.

Changes for v3:
- Replaced SZ_ macros with shifts
- Remove defined values from CONFIG_ defines
- Moved boards.cfg entry to correct place
- Added MAINTAINERS entry

Changes for v2:
- Updated for recent at91 changes
- Use CONFIG_AT91FAMILY in soft_i2c driver
- Fixed missing snapper9260.h config file
- Add config to boards.cfg not Makefile
- Removed config.mk (now in snapper9260.h)
---

MAINTAINERS +0 -0

Uhm... Is it me or should there be a summing-up of files modified before this? It would help knowing at once which files are touched and hence, if/which Custodians are to be involved.

include/configs/snapper9260.h

Quoted 7 lines
board/bluewater/snapper9260/Makefile +0 -0
board/bluewater/snapper9260/snapper9260.c +0 -0
boards.cfg +0 -0
include/configs/snapper9260.h +0 -0

Amicalement,

Signature · 1 line
Albert.