OMAP4 Mux FW question

-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of archit taneja
Sent: Thursday, February 17, 2011 4:06 PM
To: Benoit Cousson; [email protected]
Subject: OMAP4 Mux FW question

Hi,

Does the current Mux Framework support configuration of Registers like CONTROL_DSIPHY, CONTROL_USB etc in SYSCTRL_PADCONF_CORE in OMAP4? Could someone guide me to an example?

Thanks,
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Sricharan R
Sent: Thursday, February 17, 2011 5:05 PM
To: Archit Taneja; Benoit Cousson; [email protected]
Subject: RE: OMAP4 Mux FW question

Hi Archit,
Those control registers are not a part of the mux list. So the mux framework does not support configuring them. Only the pad mux registers are configured.

(Avoid top posting please)

Quoted 11 lines

-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Sricharan R
Sent: Thursday, February 17, 2011 5:05 PM
To: Archit Taneja; Benoit Cousson; [email protected]
Subject: RE: OMAP4 Mux FW question

Hi Archit,
Those control registers are not a part of the mux list. So the mux framework does not support configuring them. Only the pad mux registers are configured.

[....]

If they are not part of MUX registers then you could use control APIs directly. They should work.

omap4_ctrl_pad_readl() and omap4_ctrl_pad_writel()