Skip to contentSkip to conversation

double_buffer_not_ok compile error

PATCH Michael Jones 3 participants 5 messages Feb 21, 2011 – Feb 24, 2011

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi Felipe,

In commit 0662481855c389b75a0a54c32870cc90563d80a9, the member 'double_buffer_not_ok' was added to 'struct musb', but only inside #ifdef CONFIG_USB_GADGET_MUSB_HDRC. In musb_host.c, this member is used outside of the same #ifdef, so I get a compile error because I have CONFIG_USB_GADGET_MUSB_HDRC=n (because I have CONFIG_USB_GADGET_OMAP=y).

here is the error:
drivers/usb/musb/musb_host.c: In function 'musb_rx_reinit':
drivers/usb/musb/musb_host.c:612: error: 'struct musb' has no member named 'double_buffer_not_ok'

I'm not familiar enough with this to propose a correct patch, but for example with the patch below, I can compile the kernel. Maybe the member definition can just be taken out of the #ifdef.

Can you propose a proper fix for this?

thanks,
Michael Jones

drivers/usb/musb/musb_host.c +4 -0
index 0f523d7..809965f 100644
@@ -609,9 +609,11 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 	/* Set RXMAXP with the FIFO size of the endpoint
 	 * to disable double buffer mode.
 	 */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	if (musb->double_buffer_not_ok)
 		musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
 	else
+#endif
 		musb_writew(ep->regs, MUSB_RXMAXP,
 				qh->maxpacket | ((qh->hb_mult - 1) << 11));
 
@@ -784,10 +786,12 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		/* protocol/endpoint/interval/NAKlimit */
 		if (epnum) {
 			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 			if (musb->double_buffer_not_ok)
 				musb_writew(epio, MUSB_TXMAXP,
 						hw_ep->max_packet_sz_tx);
 			else
+#endif
 				musb_writew(epio, MUSB_TXMAXP,
 						qh->maxpacket |
 						((qh->hb_mult - 1) << 11));

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner

#1 lore raw

Hi,

Quoted 11 lines · Michael Jones

In commit 0662481855c389b75a0a54c32870cc90563d80a9, the member 'double_buffer_not_ok' was added to 'struct musb', but only inside #ifdef CONFIG_USB_GADGET_MUSB_HDRC. In musb_host.c, this member is used outside of the same #ifdef, so I get a compile error because I have CONFIG_USB_GADGET_MUSB_HDRC=n (because I have CONFIG_USB_GADGET_OMAP=y).

here is the error:
drivers/usb/musb/musb_host.c: In function 'musb_rx_reinit':
drivers/usb/musb/musb_host.c:612: error: 'struct musb' has no member named 'double_buffer_not_ok'

Quoted 5 lines

I'm not familiar enough with this to propose a correct patch, but for example with the patch below, I can compile the kernel. Maybe the member definition can just be taken out of the #ifdef.

Can you propose a proper fix for this?

There's already a fix for that queued on Greg's queue ;-)

Thanks though

Here it is:

commit 5990378b393429244559f4750f2ee3a50929b932

Author: Felipe Balbi <[email protected]>
Date:   Fri Feb 11 10:00:02 2011 +0200

usb: musb: fix build breakage

commit 0662481855c389b75a0a54c32870cc90563d80a9 (usb: musb: disable double buffering when it's broken), introduced a compile error when gadget API is disabled.

Fix it.

drivers/usb/musb/musb_core.h +9 -8
index d74a811..e6400be 100644
@@ -488,6 +488,15 @@ struct musb {
        unsigned                set_address:1;
        unsigned                test_mode:1;
        unsigned                softconnect:1;
+
+       u8                      address;
+       u8                      test_mode_nr;
+       u16                     ackpend;                /* ep0 */
+       enum musb_g_ep0_state   ep0_state;
+       struct usb_gadget       g;                      /* the gadget */
+       struct usb_gadget_driver *gadget_driver;        /* its driver */
+#endif
+
        /*
         * FIXME: Remove this flag.
         *
@@ -501,14 +510,6 @@ struct musb {
         */
        unsigned                double_buffer_not_ok:1 __deprecated;
 
-       u8                      address;
-       u8                      test_mode_nr;
-       u16                     ackpend;                /* ep0 */
-       enum musb_g_ep0_state   ep0_state;
-       struct usb_gadget       g;                      /* the gadget */
-       struct usb_gadget_driver *gadget_driver;        /* its driver */
-#endif
-
        struct musb_hdrc_config *config;
 
 #ifdef MUSB_CONFIG_PROC_FS
Signature · 1 line
balbi
#2 lore raw

Hi Felipe,

Sorry, thanks. I tried to avoid getting that reply by searching the mailing list to see whether this was already discovered. I searched for "double_buffer_not_ok" and "musb_host" on the mailing list but didn't see anything newer than the original patch.

Where is the correct place to search for such a recent fix? Where is Greg's queue?

-Michael

Quoted 66 lines · Felipe Balbi

Hi,

Quoted 11 lines · Michael Jones

In commit 0662481855c389b75a0a54c32870cc90563d80a9, the member 'double_buffer_not_ok' was added to 'struct musb', but only inside #ifdef CONFIG_USB_GADGET_MUSB_HDRC. In musb_host.c, this member is used outside of the same #ifdef, so I get a compile error because I have CONFIG_USB_GADGET_MUSB_HDRC=n (because I have CONFIG_USB_GADGET_OMAP=y).

here is the error:
drivers/usb/musb/musb_host.c: In function 'musb_rx_reinit':
drivers/usb/musb/musb_host.c:612: error: 'struct musb' has no member named 'double_buffer_not_ok'

Quoted 5 lines

I'm not familiar enough with this to propose a correct patch, but for example with the patch below, I can compile the kernel. Maybe the member definition can just be taken out of the #ifdef.

Can you propose a proper fix for this?

There's already a fix for that queued on Greg's queue ;-)

Thanks though

Here it is:

commit 5990378b393429244559f4750f2ee3a50929b932

Author: Felipe Balbi <[email protected]>
Date:   Fri Feb 11 10:00:02 2011 +0200

usb: musb: fix build breakage

commit 0662481855c389b75a0a54c32870cc90563d80a9 (usb: musb: disable double buffering when it's broken), introduced a compile error when gadget API is disabled.

Fix it.

drivers/usb/musb/musb_core.h +9 -1
index d74a811..e6400be 100644
@@ -488,6 +488,15 @@ struct musb {
        unsigned                set_address:1;
        unsigned                test_mode:1;
        unsigned                softconnect:1;
+
+       u8                      address;
+       u8                      test_mode_nr;
+       u16                     ackpend;                /* ep0 */
+       enum musb_g_ep0_state   ep0_state;
+       struct usb_gadget       g;                      /* the gadget */
+       struct usb_gadget_driver *gadget_driver;        /* its driver */
+#endif
+
        /*
         * FIXME: Remove this flag.
         *
@@ -501,14 +510,6 @@ struct musb {
         */
        unsigned                double_buffer_not_ok:1 __deprecated;
 
-       u8                      address;

drivers/usb/musb/musb_core.h struct musb { · line 515

Quoted 10 lines
drivers/usb/musb/musb_core.h +0 -7
-       u8                      test_mode_nr;
-       u16                     ackpend;                /* ep0 */
-       enum musb_g_ep0_state   ep0_state;
-       struct usb_gadget       g;                      /* the gadget */
-       struct usb_gadget_driver *gadget_driver;        /* its driver */
-#endif
-
        struct musb_hdrc_config *config;
 
 #ifdef MUSB_CONFIG_PROC_FS

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner

#3 lore raw
Quoted 9 lines · Michael Jones

Hi Felipe,

Sorry, thanks. I tried to avoid getting that reply by searching the mailing list to see whether this was already discovered. I searched for "double_buffer_not_ok" and "musb_host" on the mailing list but didn't see anything newer than the original patch.

Where is the correct place to search for such a recent fix? Where is Greg's queue?

Yes, Greg's usb-linux or my gitorious musb branch.

Signature · 1 line
balbi
#4 lore raw
Quoted 8 lines · Felipe Balbi
Quoted 7 lines · Michael Jones

Hi Felipe,

Sorry, thanks. I tried to avoid getting that reply by searching the mailing list to see whether this was already discovered. I searched for "double_buffer_not_ok" and "musb_host" on the mailing list but didn't see anything newer than the original patch.

Quoted 11 lines
Quoted 2 lines

Where is the correct place to search for such a recent fix? Where is Greg's queue?

Yes, Greg's usb-linux or my gitorious musb branch.

Signature · 5 lines
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Hi, thanks for that. Ran into the same problem whilst trying the linux-linaro-2.6.38 tree. I hope your patch will make it to this tree soon

Regards,

Signature · 1 line
Markos Chandras / Gentoo Linux Developer / Key ID: B4AFF2C2