Skip to contentSkip to conversation

kernel versions

DISCUSSION Gary Thomas 2 participants 6 messages Feb 21, 2011 – Feb 23, 2011

lore
Share & tools
lore
#0 lore raw

I have my own kernel recipes (historical reasons...) which I now have 2 versions of. Some platforms have not yet been ported to the latest version and I need to keep using the older one for those platforms until the porting is complete.

Sadly, I can't get this to work.

Here's what I have

  $ tree meta-amltd/packages/linux/
    meta-amltd/packages/linux/
    ├── linux-am_2.6.32.bb
    ├── linux-am_2.6.37.bb
  $ tree meta-cobra3530p60/packages/linux/
    meta-cobra3530p60/packages/linux/
    ├── linux-am-2.6.32
    │   └── cobra3530p60
    │       ├── cobra3530p60.patch
    │       └── defconfig
    ├── linux-am_2.6.32.bbappend

I tried these settings in my machine/cobra3530p60
PREFERRED_PROVIDER_virtual/kernel = "linux-am" PREFERRED_VERSION_virtual/kernel = "2.6.32"

However, it still wants to build version 2.6.37

What am I missing? How can I force it to use the 2.6.32 version for this machine?

Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#1 lore raw
Quoted 5 lines · Gary Thomas

I have my own kernel recipes (historical reasons...) which I now have 2 versions of. Some platforms have not yet been ported to the latest version and I need to keep using the older one for those platforms until the porting is complete.

Quoted 7 lines

Sadly, I can't get this to work.

Here's what I have

$ tree meta-amltd/packages/linux/
meta-amltd/packages/linux/
├── linux-am_2.6.32.bb
├── linux-am_2.6.37.bb

For clarity, this is my distribution which is layered on Poky

Quoted 7 lines
$ tree meta-cobra3530p60/packages/linux/
meta-cobra3530p60/packages/linux/
├── linux-am-2.6.32
│ └── cobra3530p60
│ ├── cobra3530p60.patch
│ └── defconfig
├── linux-am_2.6.32.bbappend

This is one of my platform/machine layers

Quoted 12 lines

I tried these settings in my machine/cobra3530p60 PREFERRED_PROVIDER_virtual/kernel = "linux-am" PREFERRED_VERSION_virtual/kernel = "2.6.32"

However, it still wants to build version 2.6.37

What am I missing? How can I force it to use the 2.6.32 version for this machine?

Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#2 lore raw
In reply to Gary Thomas
Quoted 21 lines · Gary Thomas

I have my own kernel recipes (historical reasons...) which I now have 2 versions of. Some platforms have not yet been ported to the latest version and I need to keep using the older one for those platforms until the porting is complete.

Sadly, I can't get this to work.

Here's what I have

   $ tree meta-amltd/packages/linux/
     meta-amltd/packages/linux/
     ├── linux-am_2.6.32.bb
     ├── linux-am_2.6.37.bb
   $ tree meta-cobra3530p60/packages/linux/
     meta-cobra3530p60/packages/linux/
     ├── linux-am-2.6.32
     │   └── cobra3530p60
     │       ├── cobra3530p60.patch
     │       └── defconfig
     ├── linux-am_2.6.32.bbappend
Quoted 8 lines

I tried these settings in my machine/cobra3530p60
PREFERRED_PROVIDER_virtual/kernel = "linux-am" PREFERRED_VERSION_virtual/kernel = "2.6.32"

However, it still wants to build version 2.6.37

What am I missing? How can I force it to use the 2.6.32 version for this machine?

PREFERRED_VERSION_linux-am = "2.6.32"

?

Cheers,

Richard

#3 lore raw
Quoted 26 lines · Richard Purdie
Quoted 25 lines · Gary Thomas

I have my own kernel recipes (historical reasons...) which I now have 2 versions of. Some platforms have not yet been ported to the latest version and I need to keep using the older one for those platforms until the porting is complete.

Sadly, I can't get this to work.

Here's what I have

    $ tree meta-amltd/packages/linux/
      meta-amltd/packages/linux/
      ├── linux-am_2.6.32.bb
      ├── linux-am_2.6.37.bb
    $ tree meta-cobra3530p60/packages/linux/
      meta-cobra3530p60/packages/linux/
      ├── linux-am-2.6.32
      │   └── cobra3530p60
      │       ├── cobra3530p60.patch
      │       └── defconfig
      ├── linux-am_2.6.32.bbappend

I tried these settings in my machine/cobra3530p60
PREFERRED_PROVIDER_virtual/kernel = "linux-am" PREFERRED_VERSION_virtual/kernel = "2.6.32"

Quoted 6 lines
Quoted 4 lines

However, it still wants to build version 2.6.37

What am I missing? How can I force it to use the 2.6.32 version for this machine?

PREFERRED_VERSION_linux-am = "2.6.32"

That does seem to work, but only if I put it in the <MACHINE>.conf file, not local.conf.

Why specify it one way (PREFERRED_PROVIDER_virtual/kernel) for the provider (recipe basis) and then a different way (PREFERRED_VERSION_linux-am) for the actual version?

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#4 lore raw
Quoted 32 lines · Gary Thomas
Quoted 31 lines · Richard Purdie
Quoted 29 lines · Gary Thomas

I have my own kernel recipes (historical reasons...) which I now have 2 versions of. Some platforms have not yet been ported to the latest version and I need to keep using the older one for those platforms until the porting is complete.

Sadly, I can't get this to work.

Here's what I have

    $ tree meta-amltd/packages/linux/
      meta-amltd/packages/linux/
      ├── linux-am_2.6.32.bb
      ├── linux-am_2.6.37.bb
    $ tree meta-cobra3530p60/packages/linux/
      meta-cobra3530p60/packages/linux/
      ├── linux-am-2.6.32
      │   └── cobra3530p60
      │       ├── cobra3530p60.patch
      │       └── defconfig
      ├── linux-am_2.6.32.bbappend

I tried these settings in my machine/cobra3530p60
PREFERRED_PROVIDER_virtual/kernel = "linux-am" PREFERRED_VERSION_virtual/kernel = "2.6.32"

However, it still wants to build version 2.6.37

What am I missing? How can I force it to use the 2.6.32 version for this machine?

Quoted 8 lines
Quoted 1 line

PREFERRED_VERSION_linux-am = "2.6.32"

That does seem to work, but only if I put it in the <MACHINE>.conf file, not local.conf.

Why specify it one way (PREFERRED_PROVIDER_virtual/kernel) for the provider (recipe basis) and then a different way (PREFERRED_VERSION_linux-am) for the actual version?

Each recipe has a list of things it provides. This is usually PN but in the kernel case each recipe provides "virtual/kernel" so we can group them and make a selection with PREFERRED_PROVIDER.

Bitbake first determines the provider. Once it has this it looks up the version. It looks this up using PN and not using what could be an arbitrary list of items in PROVIDES.

Summary, you always use PN with PREFERRED_VERSION as that is what makes sense in the general case.

It should however work to put this in local.conf unless you're setting it with an = and not a ?= somewhere else?

Cheers,

Richard

#5 lore raw
Quoted 46 lines · Richard Purdie
Quoted 32 lines · Gary Thomas
Quoted 31 lines · Richard Purdie
Quoted 29 lines · Gary Thomas

I have my own kernel recipes (historical reasons...) which I now have 2 versions of. Some platforms have not yet been ported to the latest version and I need to keep using the older one for those platforms until the porting is complete.

Sadly, I can't get this to work.

Here's what I have

     $ tree meta-amltd/packages/linux/
       meta-amltd/packages/linux/
       ├── linux-am_2.6.32.bb
       ├── linux-am_2.6.37.bb
     $ tree meta-cobra3530p60/packages/linux/
       meta-cobra3530p60/packages/linux/
       ├── linux-am-2.6.32
       │   └── cobra3530p60
       │       ├── cobra3530p60.patch
       │       └── defconfig
       ├── linux-am_2.6.32.bbappend

I tried these settings in my machine/cobra3530p60
PREFERRED_PROVIDER_virtual/kernel = "linux-am" PREFERRED_VERSION_virtual/kernel = "2.6.32"

However, it still wants to build version 2.6.37

What am I missing? How can I force it to use the 2.6.32 version for this machine?

Quoted 8 lines
Quoted 1 line

PREFERRED_VERSION_linux-am = "2.6.32"

That does seem to work, but only if I put it in the<MACHINE>.conf file, not local.conf.

Why specify it one way (PREFERRED_PROVIDER_virtual/kernel) for the provider (recipe basis) and then a different way (PREFERRED_VERSION_linux-am) for the actual version?

Each recipe has a list of things it provides. This is usually PN but in the kernel case each recipe provides "virtual/kernel" so we can group them and make a selection with PREFERRED_PROVIDER.

Quoted 6 lines

Bitbake first determines the provider. Once it has this it looks up the version. It looks this up using PN and not using what could be an arbitrary list of items in PROVIDES.

Summary, you always use PN with PREFERRED_VERSION as that is what makes sense in the general case.

Understood. Thanks for the explanation.

Quoted 2 lines

It should however work to put this in local.conf unless you're setting it with an = and not a ?= somewhere else?

I'm not sure what happened there - this was the real crux of my question as earlier I had tried an override with PREFERRED_VERSION_linux-am in local.conf and it ignored me. I can't duplicate that problem now.

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------