Skip to contentSkip to conversation

MACHINE_EXTRA_RRECOMMENDS not working?

DISCUSSION Darren Hart 2 participants 4 messages Mar 12, 2011 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

I'm working to get a certain package installed for a specific machine. In particular, I wrote a simple init.d script called n450-audio which sets the mixer for the n450 dev board to unmute the FRONT channel and set the volume to 70% or so - as it is muted if left untouched. For now, I just want to make this board work, so I want to make this package get installed if it's dependencies are met (if amixer is installed).

As I understand it, the best way to do this is with something like the following in the machine/n450.conf file:

MACHINE_EXTRA_RRECOMMENDS += " n450-audio "

And that recipe in turn defines:

RDEPENDS = "alsa-utils-amixer"

I then:

$ bitbake -c cleanall task-base poky-image-sato-live n450-audio

followed by:

$ bitbake poky-image-sato-live

The n450-audio recipe is built, but it does not appear in the generated image (nor in the ext3 image).

I checked the dependency chain and task-base does depend on n450-audio:

$ bitbake -g -u depexp poky-image-sato-live

I then tried using the following variables in place of MACHINE_EXTRA_RRECOMMENDS with the same result:

MACHINE_EXTRA_RDEPENDS
MACHINE_ESSENTIAL_RRECOMMENDS
MACHINE_ESSENTIAL_RDEPENDS

Finally, I added the following to my local.conf and the image built as expected:

POKY_EXTRA_INSTALL = " n450-audio "

Am I completely off in the weeds here? If this isn't what these directives are for - what are they for?

I took a look at what they are used for elsewhere and found:

$ cat ~/.bashrc | grep bb
    alias bb='bitbake'
    alias bbdeps='bitbake -g -u depexp'
dvhart@rage:poky.git$ git grep MACHINE_EXTRA_RRECOMMENDS
documentation/poky-ref-manual/ref-variables.xml:         <glossentry id='var-MACHINE_EXTRA_RRECOMMENDS'><glossterm>MACHINE_
documentation/poky-ref-manual/ref-varlocality.xml:                <para><glossterm linkend='var-MACHINE_EXTRA_RRECOMMENDS'>
meta/conf/bitbake.conf:MACHINE_EXTRA_RRECOMMENDS ?= ""
meta/conf/machine/atom-pc.conf:MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts"
meta/conf/machine/beagleboard.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/conf/machine/qemumips.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/conf/machine/routerstationpro.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/recipes-core/tasks/task-base.bb:RRECOMMENDS_task-machine-base = "${MACHINE_EXTRA_RRECOMMENDS}"

Only two other recipes are referenced with these variables:
kernel-modules and eee-acpi-scripts. I had an atom-pc build so I mounted the rootfs and dug around - not a trace of the eee-acpi-scripts to found anywhere. I checked for modules under /lib/modules/2.6.34.7-yocto-standard/ and found several *.*map files, but nothing else (certainly no *.ko files). So this mechanism certainly doesn't do what I thought it did.

Is it supposed to? If not, what does it do. It does cause the package listed to be built, perhaps that is it's only purpose? The user can install the package manually if they want it?

And, more to the point, if this isn't the right mechanism to cause a package to be added (if deps are met) to any image for a specific machine, what is?

If you want to see the branch in question, it's here:
http://git.pokylinux.org/cgit/cgit.cgi/meta-intel/log/?h=dvhart/n450-audio

(Yes, the init script is terrible - working on that.)

Thanks,

Signature · 3 lines
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
#1 lore raw
Quoted 78 lines · Darren Hart

I'm working to get a certain package installed for a specific machine. In particular, I wrote a simple init.d script called n450-audio which sets the mixer for the n450 dev board to unmute the FRONT channel and set the volume to 70% or so - as it is muted if left untouched. For now, I just want to make this board work, so I want to make this package get installed if it's dependencies are met (if amixer is installed).

As I understand it, the best way to do this is with something like the following in the machine/n450.conf file:

MACHINE_EXTRA_RRECOMMENDS += " n450-audio "

And that recipe in turn defines:

RDEPENDS = "alsa-utils-amixer"

I then:

$ bitbake -c cleanall task-base poky-image-sato-live n450-audio

followed by:

$ bitbake poky-image-sato-live

The n450-audio recipe is built, but it does not appear in the generated image (nor in the ext3 image).

I checked the dependency chain and task-base does depend on n450-audio:

$ bitbake -g -u depexp poky-image-sato-live

I then tried using the following variables in place of MACHINE_EXTRA_RRECOMMENDS with the same result:

MACHINE_EXTRA_RDEPENDS
MACHINE_ESSENTIAL_RRECOMMENDS
MACHINE_ESSENTIAL_RDEPENDS

Finally, I added the following to my local.conf and the image built as expected:

POKY_EXTRA_INSTALL = " n450-audio "

Am I completely off in the weeds here? If this isn't what these directives are for - what are they for?

I took a look at what they are used for elsewhere and found:

$ cat ~/.bashrc | grep bb
     alias bb='bitbake'
     alias bbdeps='bitbake -g -u depexp'
dvhart@rage:poky.git$ git grep MACHINE_EXTRA_RRECOMMENDS
documentation/poky-ref-manual/ref-variables.xml:<glossentry id='var-MACHINE_EXTRA_RRECOMMENDS'><glossterm>MACHINE_
documentation/poky-ref-manual/ref-varlocality.xml:<para><glossterm linkend='var-MACHINE_EXTRA_RRECOMMENDS'>
meta/conf/bitbake.conf:MACHINE_EXTRA_RRECOMMENDS ?= ""
meta/conf/machine/atom-pc.conf:MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts"
meta/conf/machine/beagleboard.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/conf/machine/qemumips.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/conf/machine/routerstationpro.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/recipes-core/tasks/task-base.bb:RRECOMMENDS_task-machine-base = "${MACHINE_EXTRA_RRECOMMENDS}"

Only two other recipes are referenced with these variables:
kernel-modules and eee-acpi-scripts. I had an atom-pc build so I mounted the rootfs and dug around - not a trace of the eee-acpi-scripts to found anywhere. I checked for modules under /lib/modules/2.6.34.7-yocto-standard/ and found several *.*map files, but nothing else (certainly no *.ko files). So this mechanism certainly doesn't do what I thought it did.

Is it supposed to? If not, what does it do. It does cause the package listed to be built, perhaps that is it's only purpose? The user can install the package manually if they want it?

And, more to the point, if this isn't the right mechanism to cause a package to be added (if deps are met) to any image for a specific machine, what is?

Quoted 6 lines

If you want to see the branch in question, it's here:
http://git.pokylinux.org/cgit/cgit.cgi/meta-intel/log/?h=dvhart/n450-audio

(Yes, the init script is terrible - working on that.)

Thanks,

Did you rebuild task-machine-base?

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#2 lore raw
Quoted 90 lines · Gary Thomas
Quoted 89 lines · Darren Hart

I'm working to get a certain package installed for a specific machine. In particular, I wrote a simple init.d script called n450-audio which sets the mixer for the n450 dev board to unmute the FRONT channel and set the volume to 70% or so - as it is muted if left untouched. For now, I just want to make this board work, so I want to make this package get installed if it's dependencies are met (if amixer is installed).

As I understand it, the best way to do this is with something like the following in the machine/n450.conf file:

MACHINE_EXTRA_RRECOMMENDS += " n450-audio "

And that recipe in turn defines:

RDEPENDS = "alsa-utils-amixer"

I then:

$ bitbake -c cleanall task-base poky-image-sato-live n450-audio

followed by:

$ bitbake poky-image-sato-live

The n450-audio recipe is built, but it does not appear in the generated image (nor in the ext3 image).

I checked the dependency chain and task-base does depend on n450-audio:

$ bitbake -g -u depexp poky-image-sato-live

I then tried using the following variables in place of MACHINE_EXTRA_RRECOMMENDS with the same result:

MACHINE_EXTRA_RDEPENDS
MACHINE_ESSENTIAL_RRECOMMENDS
MACHINE_ESSENTIAL_RDEPENDS

Finally, I added the following to my local.conf and the image built as expected:

POKY_EXTRA_INSTALL = " n450-audio "

Am I completely off in the weeds here? If this isn't what these directives are for - what are they for?

I took a look at what they are used for elsewhere and found:

$ cat ~/.bashrc | grep bb
alias bb='bitbake'
alias bbdeps='bitbake -g -u depexp'
dvhart@rage:poky.git$ git grep MACHINE_EXTRA_RRECOMMENDS
documentation/poky-ref-manual/ref-variables.xml:<glossentry
id='var-MACHINE_EXTRA_RRECOMMENDS'><glossterm>MACHINE_
documentation/poky-ref-manual/ref-varlocality.xml:<para><glossterm
linkend='var-MACHINE_EXTRA_RRECOMMENDS'>
meta/conf/bitbake.conf:MACHINE_EXTRA_RRECOMMENDS ?= ""
meta/conf/machine/atom-pc.conf:MACHINE_EXTRA_RRECOMMENDS =
"kernel-modules eee-acpi-scripts"
meta/conf/machine/beagleboard.conf:MACHINE_EXTRA_RRECOMMENDS = "
kernel-modules"
meta/conf/machine/qemumips.conf:MACHINE_EXTRA_RRECOMMENDS = "
kernel-modules"
meta/conf/machine/routerstationpro.conf:MACHINE_EXTRA_RRECOMMENDS = "
kernel-modules"
meta/recipes-core/tasks/task-base.bb:RRECOMMENDS_task-machine-base =
"${MACHINE_EXTRA_RRECOMMENDS}"

Only two other recipes are referenced with these variables:
kernel-modules and eee-acpi-scripts. I had an atom-pc build so I mounted the rootfs and dug around - not a trace of the eee-acpi-scripts to found anywhere. I checked for modules under /lib/modules/2.6.34.7-yocto-standard/ and found several *.*map files, but nothing else (certainly no *.ko files). So this mechanism certainly doesn't do what I thought it did.

Is it supposed to? If not, what does it do. It does cause the package listed to be built, perhaps that is it's only purpose? The user can install the package manually if they want it?

And, more to the point, if this isn't the right mechanism to cause a package to be added (if deps are met) to any image for a specific machine, what is?

If you want to see the branch in question, it's here:
http://git.pokylinux.org/cgit/cgit.cgi/meta-intel/log/?h=dvhart/n450-audio

Quoted 5 lines
Quoted 3 lines

(Yes, the init script is terrible - working on that.)

Thanks,

Did you rebuild task-machine-base?

I did not - but the dependency graph showed task-base dependent on it.

$ bitbake -c cleanall task-machine-base task-base n450-audio poky-image-sato-live

The output didn't make any reference to "task-machine-base".

$ bitbake poky-image-sato-live

mount and check the fs.... huh... it's there. Interesting...

I'm going to try a clean build now and ensure this works as intended, and not just some hinky side-effect of the POKY_EXTRA_INSTALL I just barely commented out of local.conf. Thanks for the tip Gary!

This doesn't adress the observations regarding kernel-modules and eee-acpi-scripts though.

Signature · 3 lines
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
#4 lore raw
In reply to a message not in the archive
Quoted 10 lines · Koen Kooi

Op 12 mrt. 2011 om 05:31 heeft Darren Hart<[email protected]> het volgende geschreven:

Quoted 4 lines

I'm working to get a certain package installed for a specific machine. In particular, I wrote a simple init.d script called n450-audio which sets the mixer for the n450 dev board to unmute the FRONT channel and set the volume to 70% or so - as it is muted if left untouched.

Wouldn't alsa-state be a better place for that?

It would be, yes. Turns out we don't have alsa-state in poky yet, and adding it now would be a lot of last minute churn - so opted to fix this particular recipe now (n450-audio already existed in some form) and look into a more appropriate general purpose solution as a follow-up.

I wasn't aware of the alsa-state recipe in OE, had a look, and it looks very similar to what I had in mind. Thanks for the pointer.

Thanks,

Darren

Quoted 99 lines

regards,

koen

Quoted 90 lines

For now,
I just want to make this board work, so I want to make this package get installed if it's dependencies are met (if amixer is installed).

As I understand it, the best way to do this is with something like the following in the machine/n450.conf file:

MACHINE_EXTRA_RRECOMMENDS += " n450-audio "

And that recipe in turn defines:

RDEPENDS = "alsa-utils-amixer"

I then:

$ bitbake -c cleanall task-base poky-image-sato-live n450-audio

followed by:

$ bitbake poky-image-sato-live

The n450-audio recipe is built, but it does not appear in the generated image (nor in the ext3 image).

I checked the dependency chain and task-base does depend on n450-audio:

$ bitbake -g -u depexp poky-image-sato-live

I then tried using the following variables in place of MACHINE_EXTRA_RRECOMMENDS with the same result:

MACHINE_EXTRA_RDEPENDS
MACHINE_ESSENTIAL_RRECOMMENDS
MACHINE_ESSENTIAL_RDEPENDS

Finally, I added the following to my local.conf and the image built as expected:

POKY_EXTRA_INSTALL = " n450-audio "

Am I completely off in the weeds here? If this isn't what these directives are for - what are they for?

I took a look at what they are used for elsewhere and found:

$ cat ~/.bashrc | grep bb
    alias bb='bitbake'
    alias bbdeps='bitbake -g -u depexp'
dvhart@rage:poky.git$ git grep MACHINE_EXTRA_RRECOMMENDS
documentation/poky-ref-manual/ref-variables.xml:<glossentry id='var-MACHINE_EXTRA_RRECOMMENDS'><glossterm>MACHINE_
documentation/poky-ref-manual/ref-varlocality.xml:<para><glossterm linkend='var-MACHINE_EXTRA_RRECOMMENDS'>
meta/conf/bitbake.conf:MACHINE_EXTRA_RRECOMMENDS ?= ""
meta/conf/machine/atom-pc.conf:MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts"
meta/conf/machine/beagleboard.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/conf/machine/qemumips.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/conf/machine/routerstationpro.conf:MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
meta/recipes-core/tasks/task-base.bb:RRECOMMENDS_task-machine-base = "${MACHINE_EXTRA_RRECOMMENDS}"

Only two other recipes are referenced with these variables:
kernel-modules and eee-acpi-scripts. I had an atom-pc build so I mounted the rootfs and dug around - not a trace of the eee-acpi-scripts to found anywhere. I checked for modules under /lib/modules/2.6.34.7-yocto-standard/ and found several *.*map files, but nothing else (certainly no *.ko files). So this mechanism certainly doesn't do what I thought it did.

Is it supposed to? If not, what does it do. It does cause the package listed to be built, perhaps that is it's only purpose? The user can install the package manually if they want it?

And, more to the point, if this isn't the right mechanism to cause a package to be added (if deps are met) to any image for a specific machine, what is?

If you want to see the branch in question, it's here:
http://git.pokylinux.org/cgit/cgit.cgi/meta-intel/log/?h=dvhart/n450-audio

(Yes, the init script is terrible - working on that.)

Thanks,

--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Signature · 3 lines
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel