compile application header file missing
Hello,
I have programmed an application that uses the OpenSLP library and thus needs the header file from it. OpenSLP is already compiled and running fine on the target.
But when I try to compile my application it can't find the header file.
When I print out the CFLAGS with bitbake myimage -e | grep CFLAGS the BUILD_CFLAGS point to:/home/gerard/green-3.3/build/tmp/sysroots/i686-linux/usr/include
The slp.h is indeed missing, but it is located at:/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/usr/include
How can I change the CFLAGS to look in the other folder or force OpenSLP to drop it in the i686 folder?
I have added OpenSLP to my DEPENDS in the recipe, also tried RDEPENDS but it didn't solve the problem.
Regards,
Gerard
Quoted 13 lines · Gerard van den Bosch
Hello,
I have programmed an application that uses the OpenSLP library and thus needs the header file from it.
OpenSLP is already compiled and running fine on the target.But when I try to compile my application it can't find the header file. When I print out the CFLAGS with bitbake myimage -e | grep CFLAGS the
BUILD_CFLAGSpoint to:/home/gerard/green-3.3/build/tmp/sysroots/i686-linux/usr/includeTheslp.his indeed missing, but it is located at:/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/usr/include
Quoted 5 lines
How can I change the CFLAGS to look in the other folder or force OpenSLP to drop it in the i686 folder?
I have added OpenSLP to my DEPENDS in the recipe, also tried RDEPENDS but it didn't solve the problem.
You should be adding OpenSLP to DEPENDS. The toolchain should be automatically searching the arm sysroot /usr/include directory for include files which is where your file is.
I appreciate this is the green release, in master we have this in meta/conf/bitbake.conf:
TOOLCHAIN_OPTIONS = " --sysroot=${STAGING_DIR_TARGET}"
export CC = "${CCACHE}${HOST_PREFIX}gcc ${HOST_CC_ARCH}${TOOLCHAIN_OPTIONS}"
Back in green, this option should be being hardcoded into gcc as the default sysroot option but you could try explicitly setting it.
Note that BUILD_CFLAGS is the wrong place to look, those are for native build tools, not target ones. You want to use TARGET_CFLAGS and TARGET_CFLAGS should be the same as CFLAGS.
After reading the above, if your image *is* using BUILD_CFLAGS and BUILD_CC instead of CC, that is your real problem, it should be using the target device compiler, not the build one.
Cheers,
Richard
Quoted 37 lines · Richard Purdie
Quoted 13 lines · Gerard van den Bosch
Hello,
I have programmed an application that uses the OpenSLP library and thus needs the header file from it.
OpenSLP is already compiled and running fine on the target.But when I try to compile my application it can't find the header file. When I print out the CFLAGS with bitbake myimage -e | grep CFLAGS the
BUILD_CFLAGSpoint to:/home/gerard/green-3.3/build/tmp/sysroots/i686-linux/usr/includeTheslp.his indeed missing, but it is located at:/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/usr/includeQuoted 5 lines
How can I change the CFLAGS to look in the other folder or force OpenSLP to drop it in the i686 folder?
I have added OpenSLP to my DEPENDS in the recipe, also tried RDEPENDS but it didn't solve the problem.
You should be adding OpenSLP to DEPENDS. The toolchain should be automatically searching the arm sysroot
/usr/includedirectory for include files which is where your file is.I appreciate this is the green release, in master we have this in
meta/conf/bitbake.conf:
TOOLCHAIN_OPTIONS= " --sysroot=${STAGING_DIR_TARGET}"export CC = "${CCACHE}${HOST_PREFIX}gcc ${HOST_CC_ARCH}${TOOLCHAIN_OPTIONS}"
Back in green, this option should be being hardcoded into gcc as the default sysroot option but you could try explicitly setting it.
Note that
BUILD_CFLAGSis the wrong place to look, those are for native build tools, not target ones. You want to useTARGET_CFLAGSandTARGET_CFLAGSshould be the same as CFLAGS.
Quoted 8 lines
After reading the above, if your image *is* using
BUILD_CFLAGSandBUILD_CCinstead of CC, that is your real problem, it should be using the target device compiler, not the build one.Cheers,
Richard
I am indeed using the Green release.
The TARGET_CFLAGS are indeed the same as the CFLAGS. The system is using the default CC and not the BUILD_CC, thanks for pointing out the difference.
I have added the --sysroot option pointing to the arm sysroot to the CFLAGS in my recipe, with compilation it now looks like this:
arm-poky-linux-gnueabi-gcc -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -fno-tree-vectorize -fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2 -ggdb -feliminate-unused-debug-types --sysroot=/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/ libxmlpcp.c -o libxmlpcp.o
This removes the missing SLP.h error.
Is this problem related to my recipe or did I broke my build environment?
My recipe looks like this:
DESCRIPTION = "libxmlpcp"
SECTION = "examples"
DEPENDS = "openslp libxml2"
LICENSE = "LGPL"
SRC_URI = "file://libxmlpcp.tar.gz"
CFLAGS += --sysroot=/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/
do_install() {
install -d ${D}${libdir}
install -d ${D}${includedir}
oe_runmake 'INSTALLHEADERDIR=${D}${includedir}' 'INSTALLLIBDIR=${D}${libdir}' \
install
}Regards,
Gerard
Quoted 14 lines · Gerard van den Bosch
I am indeed using the Green release.
The
TARGET_CFLAGSare indeed the same as the CFLAGS. The system is using the default CC and not theBUILD_CC, thanks for pointing out the difference.I have added the --sysroot option pointing to the arm sysroot to the CFLAGS in my recipe, with compilation it now looks like this:
arm-poky-linux-gnueabi-gcc -march=armv7-a -mtune=cortex-a8 -mfpu=neon(quoted diff) +0
-4-mfloat-abi=softfp -fno-tree-vectorize -fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2 -ggdb -feliminate-unused-debug-types --sysroot=/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/ libxmlpcp.c -o libxmlpcp.o
Quoted 4 lines
This removes the missing
SLP.herror.Is this problem related to my recipe or did I broke my build environment?
To be honest, I don't know. The compiler should have been defaulting to that already so I don't understand why it wasn't working. We now explictly set this in master to allow for toolchain relocation and the machine specific sysroots support. You could try backporting the piece of code I previously referred to which should also fix the problem.
If that option were missing from the toolchain I'd have expected you to see other errors rather than just this isolated problem...
Quoted 8 lines
My recipe looks like this:
DESCRIPTION = "libxmlpcp"
SECTION = "examples"
DEPENDS = "openslp libxml2"
LICENSE = "LGPL"
SRC_URI= "file://libxmlpcp.tar.gz"
Quoted 8 lines
CFLAGS += --sysroot=/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/
do_install() { install -d ${D}${libdir} install -d ${D}${includedir} oe_runmake 'INSTALLHEADERDIR=${D}${includedir}' 'INSTALLLIBDIR=${D}${libdir}' \ install }
That all looks reasonable enough...
Cheers,
Richard
Quoted 25 lines · Richard Purdie
Quoted 14 lines · Gerard van den Bosch
I am indeed using the Green release.
The
TARGET_CFLAGSare indeed the same as the CFLAGS. The system is using the default CC and not theBUILD_CC, thanks for pointing out the difference.I have added the --sysroot option pointing to the arm sysroot to the CFLAGS in my recipe, with compilation it now looks like this:
arm-poky-linux-gnueabi-gcc -march=armv7-a -mtune=cortex-a8 -mfpu=neon(quoted diff) +0
-4-mfloat-abi=softfp -fno-tree-vectorize -fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2 -ggdb -feliminate-unused-debug-types --sysroot=/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/ libxmlpcp.c -o libxmlpcp.oQuoted 4 lines
This removes the missing
SLP.herror.Is this problem related to my recipe or did I broke my build environment?
To be honest, I don't know. The compiler should have been defaulting to that already so I don't understand why it wasn't working. We now explictly set this in master to allow for toolchain relocation and the machine specific sysroots support. You could try backporting the piece of code I previously referred to which should also fix the problem.
Quoted 2 lines
If that option were missing from the toolchain I'd have expected you to see other errors rather than just this isolated problem...
It also couldn't find libxml headers either but because I thought it was similar to the missing SLP.h I left it out.
I made the changes now to the bitbake conf file like you wrote and it compiles now without having to add the sysroot in my recipe, I have also modified my recipe to pick up libxml also. DESCRIPTION = "libxmlpcp"
SECTION = "libs"
DEPENDS = "openslp libxml2"
LICENSE = "LGPL"
SRC_URI = "file://libxmlpcp.tar.gz"
EXTRA_OEMAKE = "'CFLAGS=${CFLAGS} -fPIC -c -I${OPIEDIR}${includedir}/libxml2' 'LDFLAGS=${LDFLAGS} -shared -lxml2 -lslp'"
do_install() {
install -d ${D}${libdir}
install -d ${D}${includedir}
oe_runmake 'INSTALLHEADERDIR=${D}${includedir}' 'INSTALLLIBDIR=${D}${libdir}' \
install
}But when build is done I can not find the lib in the actual rootfs, looking at the date the rootfs is being regenerated.
The lib file exists in the build tree on the following places:
tmp/work/armv7a-poky-linux-gnueabi/libxmlpcp-0.1.0-r0/image/usr/lib tmp/sysroots/armv7a-poky-linux-gnueabi/usr/lib
libxmlpcp-dbg_0.1.0-r0_armv7a.ipk and libxmlpcp-dev_0.1.0-r0_armv7a.ipk in the tmp/deploy/ipk/armv7a folder.
I only get a "strip" error, can this be the reason it isn't included in the rootfs?
ERROR: runstrip: ''arm-poky-linux-gnueabi-strip' --remove-section=.comment --remove-section=.note --strip-unneeded '/home/gerard/green-3.3/build/tmp/work/armv7a-poky-linux-gnueabi/libxmlpcp-0.1.0-r0/package/usr/lib/libxmlpcp.so'' strip command failed
Because I didn't get soup out of it I installed the laverne release also.
If I build my package with that it also gives the strip error but at the end this gives the error that the do_rootfs failed because it couldn't find the package libxmlpcp. So I assume this is also the problem in green why my package isn't included in the rootfs only that build doesn't give the error.
I have runned my build with -DDDvv but can't figure out where it searches for my libxmlpcp package.
Regards,
Gerard
Quoted 22 lines
Quoted 8 lines
My recipe looks like this:
DESCRIPTION = "libxmlpcp"
SECTION = "examples"
DEPENDS = "openslp libxml2"
LICENSE = "LGPL"
SRC_URI= "file://libxmlpcp.tar.gz"Quoted 8 lines
CFLAGS += --sysroot=/home/gerard/green-3.3/build/tmp/sysroots/armv7a-poky-linux-gnueabi/
do_install() { install -d ${D}${libdir} install -d ${D}${includedir} oe_runmake 'INSTALLHEADERDIR=${D}${includedir}' 'INSTALLLIBDIR=${D}${libdir}' \ install }That all looks reasonable enough...
Cheers,
Richard
Quoted 18 lines
DESCRIPTION = "libxmlpcp"
SECTION = "libs"
DEPENDS = "openslp libxml2"
LICENSE = "LGPL"
SRC_URI= "file://libxmlpcp.tar.gz"
EXTRA_OEMAKE= "'CFLAGS=${CFLAGS} -fPIC -c -I${OPIEDIR}${includedir}/libxml2' 'LDFLAGS=${LDFLAGS} -shared -lxml2 -lslp'"do_install() { install -d ${D}${libdir} install -d ${D}${includedir} oe_runmake 'INSTALLHEADERDIR=${D}${includedir}' 'INSTALLLIBDIR=${D}${libdir}' \ install }But when build is done I can not find the lib in the actual rootfs, looking at the date the rootfs is being regenerated.
Quoted 7 lines
The lib file exists in the build tree on the following places:
tmp/work/armv7a-poky-linux-gnueabi/libxmlpcp-0.1.0-r0/image/usr/lib tmp/sysroots/armv7a-poky-linux-gnueabi/usr/lib
libxmlpcp-dbg_0.1.0-r0_armv7a.ipk and libxmlpcp-dev_0.1.0-r0_armv7a.ipk in the tmp/deploy/ipk/armv7a folder.I only get a "strip" error, can this be the reason it isn't included in the rootfs?
ERROR: runstrip: ''arm-poky-linux-gnueabi-strip' --remove-section=.comment --remove-section=.note --strip-unneeded '/home/gerard/green-3.3/build/tmp/work/armv7a-poky-linux-gnueabi/libxmlpcp-0.1.0-r0/package/usr/lib/libxmlpcp.so'' strip command failed
It could very well be. Can you run file or readelf -e over libxmlpcp.so and see if it is for ARM architecture ?
-Khem
Quoted 23 lines · Khem Raj
Quoted 23 lines
DESCRIPTION = "libxmlpcp"
SECTION = "libs"
DEPENDS = "openslp libxml2"
LICENSE = "LGPL"
SRC_URI= "file://libxmlpcp.tar.gz"
EXTRA_OEMAKE= "'CFLAGS=${CFLAGS} -fPIC -c -I${OPIEDIR}${includedir}/libxml2' 'LDFLAGS=${LDFLAGS} -shared -lxml2 -lslp'"do_install() { install -d ${D}${libdir} install -d ${D}${includedir} oe_runmake 'INSTALLHEADERDIR=${D}${includedir}' 'INSTALLLIBDIR=${D}${libdir}' \ install }But when build is done I can not find the lib in the actual rootfs, looking at the date the rootfs is being regenerated.
The lib file exists in the build tree on the following places:
tmp/work/armv7a-poky-linux-gnueabi/libxmlpcp-0.1.0-r0/image/usr/lib tmp/sysroots/armv7a-poky-linux-gnueabi/usr/lib
libxmlpcp-dbg_0.1.0-r0_armv7a.ipk and libxmlpcp-dev_0.1.0-r0_armv7a.ipk in the tmp/deploy/ipk/armv7a folder.
Quoted 6 lines
Quoted 2 lines
I only get a "strip" error, can this be the reason it isn't included in the rootfs?
ERROR: runstrip: ''arm-poky-linux-gnueabi-strip' --remove-section=.comment --remove-section=.note --strip-unneeded '/home/gerard/green-3.3/build/tmp/work/armv7a-poky-linux-gnueabi/libxmlpcp-0.1.0-r0/package/usr/lib/libxmlpcp.so'' strip command failedIt could very well be. Can you run file or readelf -e over libxmlpcp.so and see if it is for ARM architecture ?
-Khem
This gives me the following ELF header:
ELF Header:
Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00
Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: Intel 80386 Version: 0x1 Entry point address: 0x12f0 Start of program headers: 52 (bytes into file) Start of section headers: 29436 (bytes into file) Flags: 0x0 Size of this header: 52 (bytes) Size of program headers: 32 (bytes) Number of program headers: 6 Size of section headers: 40 (bytes) Number of section headers: 37
Section header string table index: 34
If I process the 'file' command it gives me:
libxmlpcp.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, not stripped
Ok thus there is the problem, it isn't ARM architecture.
Regards,
Gerard
Quoted 63 lines · Gerard van den Bosch
Quoted 26 lines · Khem Raj
Quoted 26 lines
DESCRIPTION = "libxmlpcp"
SECTION = "libs"
DEPENDS = "openslp libxml2"
LICENSE = "LGPL"
SRC_URI= "file://libxmlpcp.tar.gz"
EXTRA_OEMAKE= "'CFLAGS=${CFLAGS} -fPIC -c(quoted diff) +0
-2-I${OPIEDIR}${includedir}/libxml2' 'LDFLAGS=${LDFLAGS} -shared -lxml2 -lslp'"do_install() { install -d ${D}${libdir} install -d ${D}${includedir} oe_runmake 'INSTALLHEADERDIR=${D}${includedir}''INSTALLLIBDIR=${D}${libdir}' \
install
}But when build is done I can not find the lib in the actual rootfs, looking at the date the rootfs is being regenerated.
The lib file exists in the build tree on the following places:
tmp/work/armv7a-poky-linux-gnueabi/libxmlpcp-0.1.0-r0/image/usr/lib tmp/sysroots/armv7a-poky-linux-gnueabi/usr/lib
libxmlpcp-dbg_0.1.0-r0_armv7a.ipk and libxmlpcp-dev_0.1.0-r0_armv7a.ipk in the tmp/deploy/ipk/armv7a folder.Quoted 8 lines
Quoted 4 lines
I only get a "strip" error, can this be the reason it isn't included in the rootfs?
ERROR: runstrip: ''arm-poky-linux-gnueabi-strip'
--remove-section=.comment --remove-section=.note --strip-unneeded '/home/gerard/green-3.3/build/tmp/work/armv7a-poky-linux-gnueabi/libxmlpcp-0.1.0-r0/package/usr/lib/libxmlpcp.so'' strip command failedIt could very well be. Can you run file or readelf -e over libxmlpcp.so and see if it is for ARM architecture ?
-Khem
This gives me the following ELF header:
ELF Header:
Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: Intel 80386 Version: 0x1 Entry point address: 0x12f0 Start of program headers: 52 (bytes into file) Start of section headers: 29436 (bytes into file) Flags: 0x0 Size of this header: 52 (bytes) Size of program headers: 32 (bytes) Number of program headers: 6 Size of section headers: 40 (bytes) Number of section headers: 37Section header string table index: 34
If I process the 'file' command it gives me:
libxmlpcp.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, not strippedOk thus there is the problem, it isn't ARM architecture.
Quoted 8 lines
Regards,
Gerard_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky
Added CC=${CC} to the EXTRA_OEMAKE parameter and it now builds it as ARM lib. The strip error is gone but file isn't stripped:libxmlpcp.so:
ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked, not stripped
However strangely still missing it in the rootfs, but I will continue my search.
Finally got it solved by adding FILES_${PN} += "${libdir}/libxmlpcp.so" to the end of my recipe, thanks for the help :)