Update gone terribly wrong
I updated my Poky tree to current master this morning (4c695dbcd12b295a4215422622006f1f58469297)
Now, when I try to build in an extant tree, I get errors like these:
/home/local/poky-amltd/scripts/bitbake: line 51: 28850 Segmentation fault (core dumped) PSEUDO_BINDIR=$PSEUDOBINDIR PSEUDO_LIBDIR=$PSEUDOBINDIR/../lib/pseudo/lib
PSEUDO_PREFIX=$PSEUDOBINDIR/../../ PSEUDO_DISABLED=1 $PSEUDOBINDIR/pseudo $BITBAKE $@
So, I removed pseudodone and got
/home/local/poky-amltd/scripts/bitbake: line 43: 28891 Segmentation fault (core dumped) bitbake pseudo-native tar-replacement-native -c populate_sysroot
So I figured I'd just restart, so I tried this:
% mv tmp tmp.BAD
% mv sstate-cache sstate-mirror
... set SSTATE_MIRRORS to use the old cache % tail -n3 conf/local.conf SSTATE_MIRRORS ?= "\
file://.* file:///local/p60_poky/sstate-mirror/"
Sadly, it's rebuilding everything, reusing nothing :-(
Any ideas what went wrong and why the sstate mirror is not working (again)?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 17 lines · Gary Thomas
I updated my Poky tree to current master this morning (
4c695dbcd12b295a4215422622006f1f58469297)Now, when I try to build in an extant tree, I get errors like these:
/home/local/poky-amltd/scripts/bitbake: line 51: 28850 Segmentation fault (core dumped) PSEUDO_BINDIR=$PSEUDOBINDIR PSEUDO_LIBDIR=$PSEUDOBINDIR/../lib/pseudo/lib PSEUDO_PREFIX=$PSEUDOBINDIR/../../ PSEUDO_DISABLED=1 $PSEUDOBINDIR/pseudo $BITBAKE $@So, I removed pseudodone and got
/home/local/poky-amltd/scripts/bitbake: line 43: 28891 Segmentation fault (core dumped) bitbake pseudo-native tar-replacement-native -cpopulate_sysrootSo I figured I'd just restart, so I tried this:
% mv tmp tmp.BAD
% mv sstate-cache sstate-mirror
... setSSTATE_MIRRORSto use the old cache
% tail -n3conf/local.confSSTATE_MIRRORS?= "\
file://.* file:///local/p60_poky/sstate-mirror/"
Quoted 4 lines
Sadly, it's rebuilding everything, reusing nothing :-(
Any ideas what went wrong and why the sstate mirror is not working (again)?
1/2 an answer to the sstate question; it looks like something has changed the
[md5] hash on the state files. I ran bitbake with strace to see what files it
was looking at, for example, it tried to look at
sstate-libxau-native-i686-linux-1.0.6-r0-i686-2-c96b705204df4a0b4b85a9629d15fe53_populate-sysroot.tgz
when the old sstate held
sstate-libxau-native-i686-linux-1.0.6-r0-i686-2-cb04fd60d897b3222c3c046e571117ff_populate-sysroot.tgz
What controls this hash and why did it change for every package?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 8 lines · Gary Thomas
I updated my Poky tree to current master this morning (
4c695dbcd12b295a4215422622006f1f58469297)Now, when I try to build in an extant tree, I get errors like these:
/home/local/poky-amltd/scripts/bitbake: line 51: 28850 Segmentation fault (core dumped) PSEUDO_BINDIR=$PSEUDOBINDIR PSEUDO_LIBDIR=$PSEUDOBINDIR/../lib/pseudo/lib
PSEUDO_PREFIX=$PSEUDOBINDIR/../../ PSEUDO_DISABLED=1 $PSEUDOBINDIR/pseudo $BITBAKE $@So, I removed pseudodone and got
/home/local/poky-amltd/scripts/bitbake: line 43: 28891 Segmentation fault (core dumped) bitbake pseudo-native tar-replacement-native -cpopulate_sysroot
This looks like python itself is segfaulting, even without pseudo loaded so it could well be something outside our control :/. Which python version is that?
If you still have the build around it would be interesting to see if just removing the cache directory fixed that or trying to narrow down which files are triggering the segfault.
Quoted 11 lines
So I figured I'd just restart, so I tried this:
% mv tmp tmp.BAD
% mv sstate-cache sstate-mirror
... setSSTATE_MIRRORSto use the old cache
% tail -n3conf/local.confSSTATE_MIRRORS ?= "\ file://.* file:///local/p60_poky/sstate-mirror/"Sadly, it's rebuilding everything, reusing nothing :-(
Any ideas what went wrong and why the sstate mirror is not working (again)?
Likely, some of the changes in master meant the sstate checksums were invalidated and it therefore required a rebuild. The sstate files are only used if the checksums are found to be valid.
Cheers,
Richard
Quoted 7 lines · Richard Purdie
Quoted 6 lines · Gary Thomas
I updated my Poky tree to current master this morning (
4c695dbcd12b295a4215422622006f1f58469297)Now, when I try to build in an extant tree, I get errors like these:
/home/local/poky-amltd/scripts/bitbake: line 51: 28850 Segmentation fault (core dumped) PSEUDO_BINDIR=$PSEUDOBINDIR PSEUDO_LIBDIR=$PSEUDOBINDIR/../lib/pseudo/lib
PSEUDO_PREFIX=$PSEUDOBINDIR/../../ PSEUDO_DISABLED=1 $PSEUDOBINDIR/pseudo $BITBAKE $@
Quoted 6 lines
Quoted 2 lines
So, I removed pseudodone and got
/home/local/poky-amltd/scripts/bitbake: line 43: 28891 Segmentation fault (core dumped) bitbake pseudo-native tar-replacement-native -cpopulate_sysrootThis looks like python itself is segfaulting, even without pseudo loaded so it could well be something outside our control :/. Which python version is that?
Python 2.6.4 on Fedora 13
Quoted 4 lines
If you still have the build around it would be interesting to see if just removing the cache directory fixed that or trying to narrow down which files are triggering the segfault.
When I moved sstate-cache & tmp, the problem went away. I kept the old trees and will try and figure out what's crashing.
Quoted 20 lines
Quoted 9 lines
So I figured I'd just restart, so I tried this:
% mv tmp tmp.BAD
% mv sstate-cache sstate-mirror
... setSSTATE_MIRRORSto use the old cache % tail -n3conf/local.confSSTATE_MIRRORS?= "\
file://.* file:///local/p60_poky/sstate-mirror/"Quoted 3 lines
Sadly, it's rebuilding everything, reusing nothing :-(
Any ideas what went wrong and why the sstate mirror is not working (again)?
Likely, some of the changes in master meant the sstate checksums were invalidated and it therefore required a rebuild. The sstate files are only used if the checksums are found to be valid.
Cheers,
Richard
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------