Problem with building angstrom-2008.1 for at91sam9m10g45ek
-------- Original Message --------
Subject: Re: [Openembedded-users] Problem with building angstrom-2008.1 for at91sam9m10g45ek
Date: Wed, 16 Mar 2011 00:45:30 -0700
From: Khem Raj <[email protected]>
To: [email protected]
Quoted 56 lines · Terry Barnaby
Quoted 55 lines · Terry Barnaby
Quoted 40 lines · Ludovic Desroches
Hello,
Quoted 13 lines · Terry Barnaby
Hi,
I am trying to build angstrom-2008.1 for a at91sam9m10g45ek but am having
an error.NOTE: Applying patch 'tclprivate.diff' (
openembedded/recipes/tcltk/tcl-8.5.8/tclprivate.diff)
NOTE: Applying patch 'mips-tclstrtod.patch' (openembedded/recipes/tcltk/tcl-8.5.8/mips-tclstrtod.patch)
ERROR: Task 693 (virtual:native:/scratch/OpenEmbedded/openembedded/recipes/tcltk/tcl_8.5.8.bb,Quoted 9 lines
do_patch) failed with exit code 1
FATAL: Execution of 'quilt --quiltrc=/scratch/OpenEmbedded/tmp/sysroots/i686-linux/usr/bin/quiltrc push'
failed with exit code 1:
Applying patch mips-tclstrtod.patch
patch: **** rejecting target file name with ".." component:../generic/tclStrToD.c
Patch mips-tclstrtod.patch does not apply (enforce with -f)The problem seems to be only with the last patch applied onto tcl sources. Since
it concerns only MIPS architecture, you can skip it for your ARM chip by removing into tcl_8.5.8.bb the line file://mips-tclstrtod.patch;striplevel=0 \It doesn't solve the problem but then you could continue. You have a look on the
sources to see if the patches can be applied, maybe the problem is the patch level.Regards
Quoted 7 lines
Ludovic Desroches
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-usersHi Ludovic,
Thanks, that has allowed the build to continue, I will see what happens.
Cheers
Quoted 8 lines
Quoted 6 lines
Terry
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-usersShould I report this as an OpenEmbedded bug somewhere ?
please forward this to [email protected]
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
Quoted 66 lines · Terry Barnaby
-------- Original Message --------
Subject: Re: [Openembedded-users] Problem with building angstrom-2008.1 for at91sam9m10g45ek
Date: Wed, 16 Mar 2011 00:45:30 -0700
From: Khem Raj<[email protected]>
To: [email protected]Quoted 58 lines · Terry Barnaby
Quoted 57 lines · Terry Barnaby
Quoted 40 lines · Ludovic Desroches
Hello,
Quoted 13 lines · Terry Barnaby
Hi,
I am trying to build angstrom-2008.1 for a at91sam9m10g45ek but am having
an error.NOTE: Applying patch 'tclprivate.diff' (
openembedded/recipes/tcltk/tcl-8.5.8/tclprivate.diff)
NOTE: Applying patch 'mips-tclstrtod.patch' (openembedded/recipes/tcltk/tcl-8.5.8/mips-tclstrtod.patch)
ERROR: Task 693 (virtual:native:/scratch/OpenEmbedded/openembedded/recipes/tcltk/tcl_8.5.8.bb,Quoted 9 lines
do_patch) failed with exit code 1
FATAL: Execution of 'quilt --quiltrc=/scratch/OpenEmbedded/tmp/sysroots/i686-linux/usr/bin/quiltrc push'
failed with exit code 1:
Applying patch mips-tclstrtod.patch
patch: **** rejecting target file name with ".." component:../generic/tclStrToD.c
Patch mips-tclstrtod.patch does not apply (enforce with -f)The problem seems to be only with the last patch applied onto tcl sources. Since
it concerns only MIPS architecture, you can skip it for your ARM chip by removing into tcl_8.5.8.bb the line file://mips-tclstrtod.patch;striplevel=0 \It doesn't solve the problem but then you could continue. You have a look on the
sources to see if the patches can be applied, maybe the problem is the patch level.Regards
Quoted 7 lines
Ludovic Desroches
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-usersHi Ludovic,
Thanks, that has allowed the build to continue, I will see what happens.
Cheers
Terry
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-usersShould I report this as an OpenEmbedded bug somewhere ?
please forward this to [email protected]
Thanks for the report, I'll take care of this.
Signature · 2 lines
Tom Rini Mentor Graphics Corporation
Quoted 72 lines · Tom Rini
Quoted 71 lines · Terry Barnaby
-------- Original Message --------
Subject: Re: [Openembedded-users] Problem with building angstrom-2008.1 for at91sam9m10g45ek
Date: Wed, 16 Mar 2011 00:45:30 -0700
From: Khem Raj<[email protected]>
To: [email protected]Quoted 63 lines · Terry Barnaby
Quoted 61 lines · Terry Barnaby
Quoted 40 lines · Ludovic Desroches
Hello,
Quoted 13 lines · Terry Barnaby
Hi,
I am trying to build angstrom-2008.1 for a at91sam9m10g45ek but am having
an error.NOTE: Applying patch 'tclprivate.diff' (
openembedded/recipes/tcltk/tcl-8.5.8/tclprivate.diff)
NOTE: Applying patch 'mips-tclstrtod.patch' (openembedded/recipes/tcltk/tcl-8.5.8/mips-tclstrtod.patch)
ERROR: Task 693 (virtual:native:/scratch/OpenEmbedded/openembedded/recipes/tcltk/tcl_8.5.8.bb,Quoted 9 lines
do_patch) failed with exit code 1
FATAL: Execution of 'quilt --quiltrc=/scratch/OpenEmbedded/tmp/sysroots/i686-linux/usr/bin/quiltrc push'
failed with exit code 1:
Applying patch mips-tclstrtod.patch
patch: **** rejecting target file name with ".." component:../generic/tclStrToD.c
Patch mips-tclstrtod.patch does not apply (enforce with -f)The problem seems to be only with the last patch applied onto tcl sources. Since
it concerns only MIPS architecture, you can skip it for your ARM chip by removing into tcl_8.5.8.bb the line file://mips-tclstrtod.patch;striplevel=0 \It doesn't solve the problem but then you could continue. You have a look on the
sources to see if the patches can be applied, maybe the problem is the patch level.Regards
Quoted 7 lines
Ludovic Desroches
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-usersHi Ludovic,
Thanks, that has allowed the build to continue, I will see what happens.
Cheers
Terry
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Should I report this as an OpenEmbedded bug somewhere ?
please forward this to [email protected]
Thanks for the report, I'll take care of this.
Note: I ran across the same thing building Poky on Fedora 14. It didn't break my build and & forgot to do anything about it.
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------