Compro VideoMate S350

First post to this list, but not new to Linux.

I'm trying to get a Compro VideoMate S350 card to work in a 32bit Centos 5.5 system that also has a Hauppauge WinTV-NOVA-T-500 that uses the dvb-usb-dib0700.ko kernel module as its driver. The Nova-T appears to be working.

I've used the v4l source RPM from ATRPMS to build an RPM of the v4l package. The RPM I compiled/built is called video4linux-kmdl-2.6.18-194.32.1.el5.centos.plus-20090907-93.RHL5.i386.rpm

The build runs fine without issue.

When I try to load the driver for the Compro with

modprobe -v saa7134 card=169

I get

insmod /lib/modules/2.6.18-194.32.1.el5.centos.plus/kernel/drivers/media/video/video-buf.ko

WARNING: Error inserting video_buf (/lib/modules/2.6.18-194.32.1.el5.centos.plus/kernel/drivers/media/video/video-buf.ko): Invalid module format
WARNING: Error inserting videobuf_dma_sg (/lib/modules/2.6.18-194.32.1.el5.centos.plus/updates/drivers/media/video/videobuf-dma-sg.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting v4l1_compat (/lib/modules/2.6.18-194.32.1.el5.centos.plus/updates/drivers/media/video/v4l1-compat.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting videodev (/lib/modules/2.6.18-194.32.1.el5.centos.plus/updates/drivers/media/video/videodev.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting v4l2_common (/lib/modules/2.6.18-194.32.1.el5.centos.plus/updates/drivers/media/video/v4l2-common.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting ir_common (/lib/modules/2.6.18-194.32.1.el5.centos.plus/updates/drivers/media/common/ir-common.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting saa7134 (/lib/modules/2.6.18-194.32.1.el5.centos.plus/updates/drivers/media/video/saa7134/saa7134.ko): Unknown symbol in module, or unknown parameter (see dmesg)

The line referred to in /var/log/messages is

kernel: video_buf: exports duplicate symbol videobuf_mmap_mapper
(owned by videobuf_core)

I know that the centos.plus distribution includes some (if not all of) the v4l modules, so I tried my build of v4l with the plain Centos kernel build. The Nova T also runs fine, but I still get the error

insmod /lib/modules/2.6.18-194.32.1.el5/kernel/drivers/media/video/video-buf.ko
WARNING: Error inserting video_buf (/lib/modules/2.6.18-194.32.1.el5/kernel/drivers/media/video/video-buf.ko): Invalid module format

I'm sure I have missed something obvious, I'd appreciate any suggestions.

Thanks

Ken

This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

Apologies - have I sent this to the wrong list. Is there a more appropriate forum?

Thanks

Ken

This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.