Skip to contentSkip to conversation

kernel-2.6.36.2 works, later doesn't

DISCUSSION James 2 participants 5 messages Mar 20, 2011 – Mar 25, 2011

lore
Share & tools
lore

James

author
#0 lore raw
$ dmesg | grep phy
BIOS-provided physical RAM map:
modified physical RAM map:
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81
mem=0xffffc90001900000, irq=17

This is kernel-2.6.36.2.
The wireless doesn't work on any later kernel that I have tried. It is very interesting the IRQ is 17 on this kernel but 18 on 2.6.37.3.

author
#1 lore raw
Quoted 11 lines · James
$ dmesg | grep phy
BIOS-provided physical RAM map:
modified physical RAM map:
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81
mem=0xffffc90001900000, irq=17
Quoted 9 lines

This is kernel-2.6.36.2.
The wireless doesn't work on any later kernel that I have tried. It is very interesting the IRQ is 17 on this kernel but 18 on 2.6.37.3.

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

I tried
http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.36/compat-wireless-2.6.36-4.tar.bz2
but it doesn't work in the 2.6.36.2 kernel or the 2.6.38 kernel.

Where can I get the compat-wireless that is the exact code that is in the 2.6.36.2 kernel and then I can try it in the 2.6.38 kernel?

author
#2 lore raw
Quoted 21 lines · James
Quoted 11 lines · James
$ dmesg | grep phy
BIOS-provided physical RAM map:
modified physical RAM map:
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81
mem=0xffffc90001900000, irq=17
Quoted 9 lines

This is kernel-2.6.36.2.
The wireless doesn't work on any later kernel that I have tried. It is very interesting the IRQ is 17 on this kernel but 18 on 2.6.37.3.

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Quoted 6 lines

I tried
http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.36/compat-wireless-2.6.36-4.tar.bz2
but it doesn't work in the 2.6.36.2 kernel or the 2.6.38 kernel.

Where can I get the compat-wireless that is the exact code that is in the 2.6.36.2 kernel and then I can try it in the 2.6.38 kernel?

It might be kernel related.
Someone else has the same problem:
https://bugzilla.kernel.org/show_bug.cgi?id=27392

#3 lore raw
In reply to James
Quoted 21 lines · James
Quoted 11 lines · James
$ dmesg | grep phy
BIOS-provided physical RAM map:
modified physical RAM map:
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81
mem=0xffffc90001900000, irq=17
Quoted 9 lines

This is kernel-2.6.36.2.
The wireless doesn't work on any later kernel that I have tried. It is very interesting the IRQ is 17 on this kernel but 18 on 2.6.37.3.

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Quoted 7 lines

I tried
http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.36/compat-wireless-2.6.36-4.tar.bz2
but it doesn't work in the 2.6.36.2 kernel or the 2.6.38 kernel.

Where can I get the compat-wireless that is the exact code that is in the 2.6.36.2 kernel and then I can try it in the 2.6.38 kernel?

The idea of compat-wireless is to make new wifi drivers & features accessible for older host-kernel, not the other way around. It also makes no sense to have same versions of host kernel and c-w version (both 2.6.36 for example, it is the same codebase).

Did you try one of the bleeding-edge compat-wireless [1] tarball (it is updated daily, but can be broken)?
Furthermore, [2] has informations about stable releases and detailed build instructions.

Please provide full dmesg and lspci/lsusb output - not truncated one. Which user-space do you use? Network-Manager, wpasupplicant, etc.?

- Sedat -

[1] http://wireless.kernel.org/en/users/Download/#Where_to_download_bleeding_edge
[2] http://wireless.kernel.org/en/users/Download/stable/

author
#4 lore raw
Quoted 26 lines · Sedat Dilek
Quoted 25 lines · James
Quoted 11 lines · James
$ dmesg | grep phy
BIOS-provided physical RAM map:
modified physical RAM map:
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81
mem=0xffffc90001900000, irq=17
Quoted 9 lines

This is kernel-2.6.36.2.
The wireless doesn't work on any later kernel that I have tried. It is very interesting the IRQ is 17 on this kernel but 18 on 2.6.37.3.

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

I tried
http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.36/compat-wireless-2.6.36-4.tar.bz2
but it doesn't work in the 2.6.36.2 kernel or the 2.6.38 kernel.

Quoted 7 lines
Quoted 3 lines

Where can I get the compat-wireless that is the exact code that is in the 2.6.36.2 kernel and then I can try it in the 2.6.38 kernel?

The idea of compat-wireless is to make new wifi drivers & features accessible for older host-kernel, not the other way around. It also makes no sense to have same versions of host kernel and c-w version (both 2.6.36 for example, it is the same codebase).

If the old c-w works on the new kernel then I know it is a kernel problem.

Quoted 4 lines

Did you try one of the bleeding-edge compat-wireless [1] tarball (it is updated daily, but can be broken)?
Furthermore, [2] has informations about stable releases and detailed build instructions.

I last tried 2011-03-19

Quoted 2 lines

Please provide full dmesg and lspci/lsusb output - not truncated one. Which user-space do you use? Network-Manager, wpasupplicant, etc.?

No user space utilities are automatically started but I use wicd manually to get an IP from my wired connection.
The AP is open so I don't use wpasupplicant.

$ dmesg
http://lockie.ca/test/dmesg.txt.bz2
$ sudo lspci
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio
(rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)
00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1)
00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1)
00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
02:09.0 Network controller: Atheros Communications Inc. AR5008 Wireless
Network Adapter (rev 01)
04:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800
GT] (rev a2)