Skip to contentSkip to conversation

Multiple sound problems with ALC888 (1025:013f) on Acer Aspire 5930

DISCUSSION Elisavet Vorgia 2 participants 2 messages Mar 30, 2011 – Apr 2, 2011

lore
Share & tools
lore
#0 lore raw

Hi All,

I have sound issues with my laptop, I cannot get 5.1 sound and jack sensing does not work (but works on Windows 7; dual-boot).

I have an Acer Aspire 5930 (chipset: ALC888) running Ubuntu 10.10 (64-bit). I have tested with Alsa 1.0.23 (which comes with Ubuntu 10.10) and also compiled Alsa 1.0.24.
Here is the Alsa-info with Alsa 1.0.24 (latest), and "model=auto",
http://www.alsa-project.org/db/?f=2cbab ... 31dc6a7d70
<http://www.alsa-project.org/db/?f=2cbab995516f4b56a7faecf537f61f31dc6a7d70>

Here is alsa-info with "model=acer-aspire-6530g",
http://www.alsa-project.org/db/?f=40992 ... 17160cde64
<http://www.alsa-project.org/db/?f=409923a3d8f042804e61f21c7b8ae917160cde64>

However, on Linux,
1. the sound volume is too low compared to Windows 7. For example, 50% on the volume bar in Ubuntu is roughly equivalent to 10% in
Windows 7.
2. the subwoofer control bar in Sound Preferences Settings seems to control the master volume bar.
3. it seems that only 2 speakers actually work (Front Left and Front Right) as tested with speaker-test -c6 -twav
4. when I plug in the headphones jack the internal speakers don't get muted, instead I have combined sound output.

I tried to change the model from auto to "acer" (tested all the acer and the 6stack-dig models
and settled down to acer-aspire-6530g as a popular suggestion) but it didn't change much.
(You'll find the alsa-info.txt as an attachment to this message.)

Is there any possible solution or suggestion for this problem? I am happy to try out patches.

Thanks,
Elisavet

#1 lore raw

2011/3/30 Elisavet Vorgia <[email protected]>

Quoted 14 lines

Hi All,

I have sound issues with my laptop, I cannot get 5.1 sound and jack sensing does not work (but works on Windows 7; dual-boot).

I have an Acer Aspire 5930 (chipset: ALC888) running Ubuntu 10.10 (64-bit). I have tested with Alsa 1.0.23 (which comes with Ubuntu 10.10) and also compiled Alsa 1.0.24.
Here is the Alsa-info with Alsa 1.0.24 (latest), and "model=auto",
http://www.alsa-project.org/db/?f=2cbab ... 31dc6a7d70
<
http://www.alsa-project.org/db/?f=2cbab995516f4b56a7faecf537f61f31dc6a7d70

Quoted 1 line
Quoted 7 lines

Here is alsa-info with "model=acer-aspire-6530g",
http://www.alsa-project.org/db/?f=40992 ... 17160cde64 <
http://www.alsa-project.org/db/?f=409923a3d8f042804e61f21c7b8ae917160cde64

Quoted 1 line

how many audio jacks do your acer 5930 have ?

As the model acer-aspire-6530g use alc883_3ST_2ch)modes , this model won't support 5.1

if your 5930 support 5.1 with 3 audio jacks, you will need to find a model which has 3st_6ch_modes

    [ALC888_ACER_ASPIRE_6530G] = {
        .mixers = { alc888_acer_aspire_6530_mixer },
        .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs,
                alc888_acer_aspire_6530g_verbs },
        .num_dacs = ARRAY_SIZE(alc883_dac_nids),
        .dac_nids = alc883_dac_nids,
        .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
        .adc_nids = alc883_adc_nids_rev,
        .capsrc_nids = alc883_capsrc_nids_rev,
        .dig_out_nid = ALC883_DIGOUT_NID,
        .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
        .channel_mode = alc883_3ST_2ch_modes,
        .num_mux_defs =
            ARRAY_SIZE(alc888_2_capture_sources),
        .input_mux = alc888_acer_aspire_6530_sources,
        .unsol_event = alc_automute_amp_unsol_event,
        .setup = alc888_acer_aspire_6530g_setup,
        .init_hook = alc_automute_amp,
    },