twl4030-usb: Report correct vbus value for accessory charger adapters1
PATCH 1/1 twl4030-usb: Report correct vbus value for accessory charger adapters1
The twl4030-usb driver exports the status of VBUS as sysfs attribute. In case an accessory charger adapter (ACA) is connected to the OTG transceiver the attribute is always 'off', even when the charger provides VBUS. Added a variable to keep track of the status of VBUS and report it correctly
--- drivers/usb/otg/twl4030-usb.c | 9 ++++++++- 1 files changed, 8 insertions(+), 1 deletions(-)
drivers/usb/otg/twl4030-usb.c +8 -1
@@ -160,6 +160,7 @@ struct twl4030_usb {int irq;u8 linkstat; +bool vbus_supplied;u8 asleep;bool irq_enabled; };
@@ -250,6 +251,8 @@ static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)int status;int linkstat =USB_EVENT_NONE ; + twl->vbus_supplied = false; +/* * For ID/VBUS sensing, see manual section 15.4.8 ... * except when using only battery backup power, two
@@ -265,6 +268,9 @@ static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)if (status <0 )dev_err (twl->dev,"USB link status err %d\n" , status);else if (status & (BIT (7 ) |BIT (2 ))) { +if (status & (BIT (7 ))) + twl->vbus_supplied = true; +if (status &BIT (2 )) linkstat =USB_EVENT_ID ;else
@@ -484,7 +490,7 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,spin_lock_irqsave (&twl->lock, flags); ret =sprintf (buf,"%s\n" , - (twl->linkstat ==USB_EVENT_VBUS ) ?"on" :"off" ); + twl->vbus_supplied ?"on" :"off" );spin_unlock_irqrestore (&twl->lock, flags);return ret;
@@ -608,6 +614,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) twl->otg.set_peripheral = twl4030_set_peripheral; twl->otg.set_suspend = twl4030_set_suspend; twl->usb_mode = pdata->usb_mode; + twl->vbus_supplied = false; twl->asleep =1 ;/* init spinlock for workqueue */
Signature · 1 line
1.7.1
Quoted 7 lines · Matthias Kaehlcke
The twl4030-usb driver exports the status of VBUS as sysfs attribute. In case an accessory charger adapter (ACA) is connected to the OTG transceiver the attribute is always 'off', even when the charger provides VBUS. Added a variable to keep track of the status of VBUS and report it correctly
Signed-off-by Matthias Kaehlcke <[email protected]>
Ick, your email software turned the patch into a mess. I've edited it by hand, fixing it up, but next time, please fix your email client so this doesn't happen again.
thanks,
greg k-h