Logging: mechanisms and best practices
In trying to add some checkpoint logging to the kernel recipes, I wanted to understand the proper mechanisms and best practices for logging with bitbake recipes.
From what I could gather, the preferred method is to use the various loglevel functions from bb. ie:
bb.fatal() A fatal error, the recipe will set the error code and
abort.bb.error() A non-fatal error. The error code is set, the build
will be marked as red in the autobuilder.bb.warn() A non-fatal condition that could affect how things
progress.bb.debug() One of several debug levels.bb.note() A condition the user should be made aware ofbb.plain() typically the output of a tool, such as listtasks
note and plain will go to the console and should be used extremely sparingly. debug will only go to the console with the -D[D[D]] bitbake arguments, but should always go to the logs.
For annotating your recipe's task's logs, debug should typically be used. warn() should be used whenever possible over error() so as to not set the error code.
The above only covers the python functions in recipes. Unfortunately, many functions are bash. Most of these recipes use "echo", although there exist wrappers to echo in base.bbclass:
oenote
oewarn
oedebug
oefatal
As these only wrap echo, none of them go to the console without -D[D[D]] flags. Note the absence of oeplain and oeerror. oeplain wouldn't work the same as bb.plain() as it doesn't go the console, the existing oenote has a similar problem. I've added oeerror() to my local build. oedebug() uses "clever" bash tests to check the OEDEBUG loglevel, unfortunately this causes the function to exit with a failure code when the condition is not met. I've addressed this as well. There are zero users of the oe* logging calls in "meta" but I did find several users in oe.
The oe* calls depend on OEDEBUG which is not included in the environment whitelists and is not set by the -D[D[D]] arguments. Even adding it to the whitelist and my environent it wasn't accessible from the bash function. I was unable to to use oedebug() as I couldn't get the OEDEBUG value set without hardcoding it into base.bbclass.
A similar variable "BBDEBUG" exists. It can be set in local.conf (the sample suggests "yes" as a value). This has zero effect from what I can tell. Setting BBDEBUG in the environment is used in the same way as -D[D[D]], and if set to "yes" will cause bitbake to error out trying to case "yes" to an integer.
So... before I start breaking things, I wanted to make sure I fully understand how these mechanisms are intended to be used. Also, I would very much like to see a consistent interface between bash and python fragments that have the same semantics. There are also at least two more logging mechanisms I stumbled across withing the bitbake source. One is marked deprecated, and I'm not sure how the other is meant to be used. The two I mentioned above seem to be the right ones for recipes to use.
Would people consider the following to be appropriate:
o Remove BBDEBUG from local.conf.sample as it appears not be used.
o Modify oedebug to always echo the message as all echos only go to the logs anyway. A future change may enhance the oe* calls to print to the console for oenote, a new oeplain, and oedebug based on -D[D[D]] and BBDEBUG.
o Remove OEDEBUG as it doesn't seem to fit with the current BBDEBUG, -D[D[D]] mechanisms nor with the expectation that all debug statements get sent to the logs.
Thoughts?
Signature · 3 lines
Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel
Quoted 14 lines · Darren Hart
From what I could gather, the preferred method is to use the various loglevel functions from bb. ie:
bb.fatal()A fatal error, the recipe will set the error code and abort.bb.error()A non-fatal error. The error code is set, the build will be marked as red in the autobuilder.bb.warn()A non-fatal condition that could affect how things progress.bb.debug()One of several debug levels.bb.note()A condition the user should be made aware ofbb.plain()typically the output of a tool, such as listtasks
Quoted 3 lines
note and plain will go to the console and should be used extremely sparingly. debug will only go to the console with the -D[D[D]] bitbake arguments, but should always go to the logs.
As far as I know, notes from tasks are no longer displayed with knotty. They certainly aren't in master.
Quoted 3 lines
For annotating your recipe's task's logs, debug should typically be used.
warn()should be used whenever possible overerror()so as to not set the error code.
Correct.
Quoted 18 lines
The above only covers the python functions in recipes. Unfortunately, many functions are bash. Most of these recipes use "echo", although there exist wrappers to echo in base.bbclass:
oenote
oewarn
oedebug
oefatalAs these only wrap echo, none of them go to the console without -D[D[D]] flags. Note the absence of oeplain and oeerror. oeplain wouldn't work the same as
bb.plain()as it doesn't go the console, the existing oenote has a similar problem. I've addedoeerror()to my local build.oedebug()uses "clever" bash tests to check the OEDEBUG loglevel, unfortunately this causes the function to exit with a failure code when the condition is not met. I've addressed this as well. There are zero users of the oe* logging calls in "meta" but I did find several users in oe.
Quoted 5 lines
The oe* calls depend on OEDEBUG which is not included in the environment whitelists and is not set by the -D[D[D]] arguments. Even adding it to the whitelist and my environent it wasn't accessible from the bash function. I was unable to to use
oedebug()as I couldn't get the OEDEBUG value set without hardcoding it into base.bbclass.
These are largely remnants. I'm not opposed to having the shell functions that output useful things, but at the very least we can use a python snippet to check the current bitbake logging level rather than relying on an old env var. There's currently no way for shell to output things to the bitbake UI's display. In the long term, we should be able to provide small command-line scripts which communicate with the current running bitbake server the same way the current running UI does.
Quoted 7 lines
So... before I start breaking things, I wanted to make sure I fully understand how these mechanisms are intended to be used. Also, I would very much like to see a consistent interface between bash and python fragments that have the same semantics. There are also at least two more logging mechanisms I stumbled across withing the bitbake source. One is marked deprecated, and I'm not sure how the other is meant to be used. The two I mentioned above seem to be the right ones for recipes to use.
This is correct. Internal bitbake code should be using the python logging framework at this time. For now, the api functions bb.{error,warn,...} are correct for the metadata.
Quoted 3 lines
Would people consider the following to be appropriate:
o Remove BBDEBUG from local.conf.sample as it appears not be used.
Agreed.
Quoted 4 lines
o Modify oedebug to always echo the message as all echos only go to the logs anyway. A future change may enhance the oe* calls to print to the console for oenote, a new oeplain, and oedebug based on -D[D[D]] and BBDEBUG.
This would lose us functionality unnecessarily. We can programmatically check the bitbake debugging level from ${@}. E.g.:
if ${@['false', 'true'][bb.msg.debug_level['default']]}; then
echo "DEBUG: " "$@"
fi
Quoted 3 lines
o Remove OEDEBUG as it doesn't seem to fit with the current BBDEBUG, -D[D[D]] mechanisms nor with the expectation that all debug statements get sent to the logs.
Agreed.
Signature · 5 lines
Christopher Larson clarson at kergoth dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics
Quoted 15 lines · Chris Larson
Quoted 14 lines · Darren Hart
From what I could gather, the preferred method is to use the various loglevel functions from bb. ie:
bb.fatal()A fatal error, the recipe will set the error code and
abort.bb.error()A non-fatal error. The error code is set, the build
will be marked as red in the autobuilder.bb.warn()A non-fatal condition that could affect how things
progress.bb.debug() One of several debug levels. bb.note() A condition the user should be made aware of bb.plain() typically the output of a tool, such as listtasks
Quoted 6 lines
Quoted 3 lines
note and plain will go to the console and should be used extremely sparingly. debug will only go to the console with the -D[D[D]] bitbake arguments, but should always go to the logs.
As far as I know, notes from tasks are no longer displayed with knotty. They certainly aren't in master.
Gah, right. I knew that, got lost in maelstrom.
Quoted 31 lines
Quoted 4 lines
For annotating your recipe's task's logs, debug should typically be used.
warn()should be used whenever possible overerror()so as to not set the error code.Correct.
Quoted 18 lines
The above only covers the python functions in recipes. Unfortunately, many functions are bash. Most of these recipes use "echo", although there exist wrappers to echo in base.bbclass:
oenote
oewarn
oedebug
oefatalAs these only wrap echo, none of them go to the console without -D[D[D]] flags. Note the absence of oeplain and oeerror. oeplain wouldn't work the same as
bb.plain()as it doesn't go the console, the existing oenote has a similar problem. I've addedoeerror()to my local build.oedebug()uses "clever" bash tests to check the OEDEBUG loglevel, unfortunately this causes the function to exit with a failure code when the condition is not met. I've addressed this as well. There are zero users of the oe* logging calls in "meta" but I did find several users in oe.Quoted 5 lines
The oe* calls depend on OEDEBUG which is not included in the environment whitelists and is not set by the -D[D[D]] arguments. Even adding it to the whitelist and my environent it wasn't accessible from the bash function. I was unable to to use
oedebug()as I couldn't get the OEDEBUG value set without hardcoding it into base.bbclass.
Quoted 8 lines
These are largely remnants. I'm not opposed to having the shell functions that output useful things, but at the very least we can use a python snippet to check the current bitbake logging level rather than relying on an old env var. There's currently no way for shell to output things to the bitbake UI's display. In the long term, we should be able to provide small command-line scripts which communicate with the current running bitbake server the same way the current running UI does.
If they are remnants, would anyone object to my replacing them with:
bbplain()bbnote()bbwarn()bbdebug()bberror()bbfatal()
?
My hope is to get something working now, even if it is just to the logs, that we can extend the functionality of by integrating it with bitbake logging later - without changing the interface.
Quoted 9 lines
Quoted 8 lines
So... before I start breaking things, I wanted to make sure I fully understand how these mechanisms are intended to be used. Also, I would very much like to see a consistent interface between bash and python fragments that have the same semantics. There are also at least two more logging mechanisms I stumbled across withing the bitbake source. One is marked deprecated, and I'm not sure how the other is meant to be used. The two I mentioned above seem to be the right ones for recipes to use.
Quoted 3 lines
This is correct. Internal bitbake code should be using the python logging framework at this time. For now, the api functions bb.{error,warn,...} are correct for the metadata.
"For now"... Do you expect to see a change here? I don't want to go off canonicalizing my recipes if the recipes logging API is likely to change significantly from what I use.
Quoted 5 lines
Quoted 4 lines
Would people consider the following to be appropriate:
o Remove BBDEBUG from local.conf.sample as it appears not be used.
Quoted 8 lines
Agreed.
Quoted 4 lines
o Modify oedebug to always echo the message as all echos only go to the logs anyway. A future change may enhance the oe* calls to print to the console for oenote, a new oeplain, and oedebug based on -D[D[D]] and BBDEBUG.
This would lose us functionality unnecessarily.
Well... right now it doesn't work at all ;-)
Quoted 6 lines
We can
programmatically check the bitbake debugging level from ${@}. E.g.:if ${@['false', 'true'][bb.msg.debug_level['default']]}; then
echo "DEBUG: " "$@"
fi
The problem I have with this approach is that it limits what gets sent to the logs. As I understand it, the -D[D[D]] mechanism is meant to limit what gets sent to the console, but all debug output should go to the logs.
So until we integrate this with the bitbake logger, I think it makes the most sense to just print it all to the logs.
Am I off in the weeds here?
Quoted 6 lines
Quoted 4 lines
o Remove OEDEBUG as it doesn't seem to fit with the current BBDEBUG, -D[D[D]] mechanisms nor with the expectation that all debug statements get sent to the logs.
Agreed.
Thanks for the review and insight Chris!
Signature · 3 lines
Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel
Quoted 78 lines · Darren Hart
Quoted 15 lines · Chris Larson
Quoted 14 lines · Darren Hart
From what I could gather, the preferred method is to use the various loglevel functions from bb. ie:
bb.fatal()A fatal error, the recipe will set the error code and abort.bb.error()A non-fatal error. The error code is set, the build will be marked as red in the autobuilder.bb.warn()A non-fatal condition that could affect how things progress.bb.debug()One of several debug levels.bb.note()A condition the user should be made aware ofbb.plain()typically the output of a tool, such as listtasksQuoted 6 lines
Quoted 3 lines
note and plain will go to the console and should be used extremely sparingly. debug will only go to the console with the -D[D[D]] bitbake arguments, but should always go to the logs.
As far as I know, notes from tasks are no longer displayed with knotty. They certainly aren't in master.
Gah, right. I knew that, got lost in maelstrom.
Quoted 31 lines
Quoted 4 lines
For annotating your recipe's task's logs, debug should typically be used.
warn()should be used whenever possible overerror()so as to not set the error code.Correct.
Quoted 18 lines
The above only covers the python functions in recipes. Unfortunately, many functions are bash. Most of these recipes use "echo", although there exist wrappers to echo in base.bbclass:
oenote
oewarn
oedebug
oefatalAs these only wrap echo, none of them go to the console without -D[D[D]] flags. Note the absence of oeplain and oeerror. oeplain wouldn't work the same as
bb.plain()as it doesn't go the console, the existing oenote has a similar problem. I've addedoeerror()to my local build.oedebug()uses "clever" bash tests to check the OEDEBUG loglevel, unfortunately this causes the function to exit with a failure code when the condition is not met. I've addressed this as well. There are zero users of the oe* logging calls in "meta" but I did find several users in oe.Quoted 5 lines
The oe* calls depend on OEDEBUG which is not included in the environment whitelists and is not set by the -D[D[D]] arguments. Even adding it to the whitelist and my environent it wasn't accessible from the bash function. I was unable to to use
oedebug()as I couldn't get the OEDEBUG value set without hardcoding it into base.bbclass.Quoted 8 lines
These are largely remnants. I'm not opposed to having the shell functions that output useful things, but at the very least we can use a python snippet to check the current bitbake logging level rather than relying on an old env var. There's currently no way for shell to output things to the bitbake UI's display. In the long term, we should be able to provide small command-line scripts which communicate with the current running bitbake server the same way the current running UI does.
If they are remnants, would anyone object to my replacing them with:
bbplain()bbnote()bbwarn()bbdebug()bberror()bbfatal()
Quoted 5 lines
?
My hope is to get something working now, even if it is just to the logs, that we can extend the functionality of by integrating it with bitbake logging later - without changing the interface.
Seems reasonable to me.
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
So... before I start breaking things, I wanted to make sure I fully understand how these mechanisms are intended to be used. Also, I would very much like to see a consistent interface between bash and python fragments that have the same semantics. There are also at least two more logging mechanisms I stumbled across withing the bitbake source. One is marked deprecated, and I'm not sure how the other is meant to be used. The two I mentioned above seem to be the right ones for recipes to use.
Quoted 8 lines
Quoted 3 lines
This is correct. Internal bitbake code should be using the python logging framework at this time. For now, the api functions bb.{error,warn,...} are correct for the metadata.
"For now"... Do you expect to see a change here? I don't want to go off canonicalizing my recipes if the recipes logging API is likely to change significantly from what I use.
As far as I know there are no plans to change the API for recipes. I could see it being beneficial in certain particular cases, e.g. if one wants to send their messages to a particular domain, but I doubt it's worth the trouble.
Quoted 31 lines
Quoted 5 lines
Quoted 4 lines
Would people consider the following to be appropriate:
o Remove BBDEBUG from local.conf.sample as it appears not be used.
Quoted 8 lines
Agreed.
Quoted 4 lines
o Modify oedebug to always echo the message as all echos only go to the logs anyway. A future change may enhance the oe* calls to print to the console for oenote, a new oeplain, and oedebug based on -D[D[D]] and BBDEBUG.
This would lose us functionality unnecessarily.
Well... right now it doesn't work at all ;-)
Quoted 6 lines
We can
programmatically check the bitbake debugging level from ${@}. E.g.:if ${@['false', 'true'][bb.msg.debug_level['default']]}; then echo "DEBUG: " "$@"
fiThe problem I have with this approach is that it limits what gets sent to the logs. As I understand it, the -D[D[D]] mechanism is meant to limit what gets sent to the console, but all debug output should go to the logs.
Quoted 4 lines
So until we integrate this with the bitbake logger, I think it makes the most sense to just print it all to the logs.
Am I off in the weeds here?
Nope, well spotted, that's an excellent point. Better to lean toward verbosity for useful logs.
Signature · 5 lines
Christopher Larson clarson at kergoth dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics