Fullpass Test Report for Beagleboard 1.1 M1 20110602 Build
Quoted 8 lines · Zhao Yi
Hi Jiajun,
This is the fullpass test report for Beagleboard 1.1 M1 20110602 build. For sato-sdk image, 2 bugs (bug1130: qt4-x11-free build failed and bug 1131: init error) had been fixed in this build. The Beagleboard lsb-sdk image still build failed. The USB does not work with this build, so we reopened bug 765. The udevd daemon doesn't start up since second boot, report as bug 1146.
Ok, so we resolved the build issue and we now have a bootable beagleboard image, with 2 issues:
1146: udevd does not start on second boot was a known issue and has a resolution pending.
765: This is a larger issue related to potentially the new compiler and the upgraded Kernel. Since beagleboard and the compiler are currently works in progress, it does not make sense to step back fix M1 and then move forward to fix M2, we should focus on this issue for M2.
That being said, I think we give M1 a go with the beagleboard caveat of know problems with USB. There is active discussion of this on the poky alias currently.
Any objections?
Sau!
Quoted 59 lines
*Test Summary
-------------------------*
*Test Result Summary*
*Component* *Target* *Status* *Comments*
*BSP
* Beagleboard BUGGY
USB does not work. Udevd daemon doesn't exist since second boot.BLOCK Critical bugs, more than 50% test cases are blocked
GOOD Only Normal, Minor or Enhancement bugs, less than 10% test cases
failed
BUGGY Normal, Major and Critical bugs, more than 10% test cases failed*Detailed Test Result for each component*
*Target* *Total TCs*
*Not Run
* *Passed
* *Failed
* *Not testable (Blocked)*
*Beagleboard Sato-SDK
* 18 0 144 (bug 765) 0* You can check the detailed test result in attachment for each target. ** The failed/blocked case number is listed with failed cases’ bug number.
*Commit information
--------------------------------*
Tree/Branch: Poky/1.1_M1
Poky Commit:b4a215bd94cf1508782e49b1a3f8c6b1f7effbb9*
Issue Summary
-------------------------------------*
*Component*
*Bug Number*** *Target Milestone*
*System & Core OS*** *System Usage*
Bug 765: [beagleboard] USB does not work on beagleboard 1.0 PointRelease
*Others*Bug 1146: udevd daemon doesn't exist since second boot ---Thanks & Best Regards,
Yi
I think it's reasonable as a M* milestone
Quoted 101 lines
-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Saul Wold
Sent: Wednesday, June 08, 2011 3:04 PM
To: Yocto Project Discussions
Subject: Re: [yocto] [Yocto] Fullpass Test Report for Beagleboard 1.1 M1 20110602 BuildQuoted 8 lines · Zhao Yi
Hi Jiajun,
This is the fullpass test report for Beagleboard 1.1 M1 20110602 build. For sato-sdk image, 2 bugs (bug1130: qt4-x11-free build failed and bug 1131: init error) had been fixed in this build. The Beagleboard lsb-sdk image still build failed. The USB does not work with this build, so we reopened bug 765. The udevd daemon doesn't start up since second boot, report as bug 1146.Ok, so we resolved the build issue and we now have a bootable beagleboard image, with 2 issues:
1146: udevd does not start on second boot was a known issue and has a resolution pending.
765: This is a larger issue related to potentially the new compiler and the upgraded Kernel. Since beagleboard and the compiler are currently works in progress, it does not make sense to step back fix M1 and then move forward to fix M2, we should focus on this issue for M2.
That being said, I think we give M1 a go with the beagleboard caveat of know problems with USB. There is active discussion of this on the poky alias currently.
Any objections?
Sau!
Quoted 10 lines
*Test Summary
-------------------------*
*Test Result Summary*
*Component* *Target* *Status* *Comments*
*BSP
* Beagleboard BUGGY
USB does not work. Udevd daemon doesn't exist since second boot.Quoted 2 lines
BLOCK Critical bugs, more than 50% test cases are blocked
GOOD Only Normal, Minor or Enhancement bugs, less than 10% testcases
Quoted 2 lines
failed
BUGGY Normal, Major and Critical bugs, more than 10% test casesfailed
Quoted 31 lines
*Detailed Test Result for each component*
*Target* *Total TCs*
*Not Run
* *Passed
* *Failed
* *Not testable (Blocked)*
*Beagleboard Sato-SDK
* 18 0 144 (bug 765) 0* You can check the detailed test result in attachment for each target. ** The failed/blocked case number is listed with failed cases' bug number.
*Commit information
--------------------------------*
Tree/Branch: Poky/1.1_M1
Poky Commit:b4a215bd94cf1508782e49b1a3f8c6b1f7effbb9*
Issue Summary
-------------------------------------*
*Component*
*Bug Number*** *Target Milestone*
*System & Core OS*** *System Usage*
Bug 765: [beagleboard] USB does not work on beagleboard 1.0 PointRelease
*Others*Quoted 14 lines
Bug 1146: udevd daemon doesn't exist since second boot ---Thanks & Best Regards,
Yi_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 1 line · David C
I think it's reasonable as a M* milestone
Agreed. The whole point of the milestones is to check for regressions introduced by major changes like the toolchain upgrade. We now know what the regressions are and can work to address them. The process is working as it should :).
Cheers,
Richard