Alinco DR-135TP Comm for APRS?
I have an Alinco DR-135TP and an older laptop with a real serial port running Linux.
I have the laptop connected to the rig but cannot recall how to query the rig or the serial port.
I checked BIOS and Serial 1 and 2 and something called serial MP (I think) are all set to AUTO.
I forgot to turn off the rig when I power-cycled the laptop and the rig reacted to some sort of signals from the laptop, so the cable connection and serial port are at least partially good!
Any suggestions, please?
Signature · 5 lines
Thanks! & 73, KD4E David Colburn http://kd4e.com Have an http://ultrafidian.com day I don't google I SEARCH! STARTPAGE.com Shop Freedom-Friendly http://kd4e.com/of.html
Ooops!
I forgot to mention that I was using urxvt - which has been recommended as a Linux alternative to Hyperterminal.
Quoted 16 lines
[email protected] wrote:
I have an Alinco DR-135TP and an older laptop with a real serial port running Linux.I have the laptop connected to the rig but cannot recall how to query the rig or the serial port.
I checked BIOS and Serial 1 and 2 and something called serial MP (I think) are all set to AUTO.
I forgot to turn off the rig when I power-cycled the laptop and the rig reacted to some sort of signals from the laptop, so the cable connection and serial port are at least partially good!
Any suggestions, please?
Signature · 5 lines
Thanks! & 73, KD4E David Colburn http://kd4e.com Have an http://ultrafidian.com day I don't google I SEARCH! STARTPAGE.com Shop Freedom-Friendly http://kd4e.com/of.html