Skip to contentSkip to conversation

Pull request: u-boot-arm/master (updated)

U-Boot Albert ARIBAUD 3 participants 19 messages Jun 30, 2011 – Jul 3, 2011

lore
Share & tools
lore
#0 lore raw

Hi again Wolfgang,

This pull request obsoletes and replaces the one made earlier today.

The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a:

Prepare v2011.06 (2011-06-27 22:22:42 +0200)

are available in the git repository at:
git://git.denx.de/u-boot-arm.git master

Andreas Bie?mann (1):

       atstk100x: switch to common cfi driver

Aneesh V (9):
arm: make default implementation of cache_flush() weakly linked
armv7: cache maintenance operations for armv7
armv7: rename cache related CONFIG flags
armv7: integrate cache maintenance support
arm: minor fixes for cache and mmu handling
armv7: add PL310 support to u-boot
armv7: adapt omap4 to the new cache maintenance framework
armv7: adapt omap3 to the new cache maintenance framework
armv7: adapt s5pc1xx to the new cache maintenance framework

David M?ller (ELSOFT AG) (3):
VCMA9: remove unneeded config.mk
VCMA9: use CFI driver (and remove the old one)
VCMA9: various cleanups/code style fixes

Fabio Estevam (5):
MX5: Make the weim structure complete
MX5: Add iomux structure
MX5: Introduce a function for setting the chip select size
MX53: Add initial support for MX53ARD
vision2: Fix build due to WEIM registers name change

Holger Brunck (4):
arm/kirkwood: if CONFIG_SOFT_I2C is set don't set CONFIG_I2C_MVTWSI arm/km: fix u-boot.kwb build breakage
arm/km: remove unneeded define
arm/km: replace suenx targets with km_kirkwood

Igor Grinberg (1):
arm: omap2: apollon: fix broken build

John Rigby (1):
OMAP[34]: fix broken timer

Matthias Weisser (1):
arm: Update jadecpu board

Simon Guinot (1):
Add support for Network Space v2 and parents

Tom Warren (2):
GPIO: Tegra2: add GPIO driver for Tegra2
arm: Tegra2: GPIO: enable GPIO for Tegra2 boards

Valentin Longchamp (3):
arm/km: use board KM_ENV_BUS for CONFIG_I2C_ENV_EEPROM_BUS arm/km: ethernet support for mgcoge3un
arm/km: add support for portl2 board

andreas.devel at googlemail.com (8):
at91rm9200.h: fix ATMEL_PMX_AA_TXD2
arm920t/at91: add clock.c
arm920t/at91: use new clock.c features
arm920t/at91: add at91rm9200_devices.c
at91rm9200ek: use atmel_usart
eb_cpux9k2: use atmel_usart
cpuat91: use atmel_usart
driver/serial: delete at91rm9200_usart

esw at bus-elektronik.de (1):
Fix compiler error for cpu at91sam9, if lowlevel init is enabled

  MAINTAINERS                                      |   14 +-
  MAKEALL                                          |    3 +-
  README                                           |   11 +
  arch/arm/cpu/arm1136/start.S                     |    4 +-
  arch/arm/cpu/arm920t/at91/Makefile               |    3 +
  arch/arm/cpu/arm920t/at91/at91rm9200_devices.c   |   85 ++++
  arch/arm/cpu/arm920t/at91/clock.c                |  160 +++++++
  arch/arm/cpu/arm920t/at91/cpu.c                  |   43 ++
  arch/arm/cpu/arm926ejs/at91/clock.c              |   35 +--
  arch/arm/cpu/armv7/Makefile                      |    2 +-
  arch/arm/cpu/armv7/cache_v7.c                    |  394 ++++++++++++++++
  arch/arm/cpu/armv7/cpu.c                         |   50 +--
  arch/arm/cpu/armv7/mx5/soc.c                     |   30 ++
  arch/arm/cpu/armv7/omap-common/timer.c           |    7 +-
  arch/arm/cpu/armv7/omap3/Makefile                |    1 -
  arch/arm/cpu/armv7/omap3/board.c                 |  136 +++++-
  arch/arm/cpu/armv7/omap3/cache.S                 |  263 -----------
  arch/arm/cpu/armv7/omap3/lowlevel_init.S         |   32 ++
  arch/arm/cpu/armv7/omap4/board.c                 |   12 +
  arch/arm/cpu/armv7/omap4/lowlevel_init.S         |    9 +
  arch/arm/cpu/armv7/s5pc1xx/cache.S               |   88 +----
  arch/arm/cpu/armv7/start.S                       |   18 +-
  arch/arm/include/asm/arch-at91/at91rm9200.h      |   12 +-
  arch/arm/include/asm/arch-at91/at91sam9_sdramc.h |    2 +-
  arch/arm/include/asm/arch-at91/clk.h             |   42 ++-
  arch/arm/include/asm/arch-kirkwood/config.h      |    2 +
  arch/arm/include/asm/arch-mx5/imx-regs.h         |  159 ++++++-
  arch/arm/include/asm/arch-mx5/sys_proto.h        |    2 +-
  arch/arm/include/asm/arch-omap3/omap3.h          |   20 +
  arch/arm/include/asm/arch-omap3/sys_proto.h      |   10 +-
  arch/arm/include/asm/arch-omap4/sys_proto.h      |    2 +-
  arch/arm/include/asm/arch-s5pc1xx/sys_proto.h    |    3 -
  arch/arm/include/asm/arch-tegra2/gpio.h          |  250 ++++++++++-
  arch/arm/include/asm/armv7.h                     |   67 +++
  arch/arm/include/asm/global_data.h               |    2 +-
  arch/arm/include/asm/gpio.h                      |   38 ++
  arch/arm/include/asm/pl310.h                     |   73 +++
  arch/arm/include/asm/utils.h                     |   56 +++
  arch/arm/lib/Makefile                            |    3 +-
  arch/arm/lib/board.c                             |    8 +-
  arch/arm/lib/cache-cp15.c                        |   22 +-
  arch/arm/lib/cache-pl310.c                       |  115 +++++
  arch/arm/lib/cache.c                             |   20 +-
  board/BuS/eb_cpux9k2/cpux9k2.c                   |    7 +
  board/LaCie/netspace_v2/Makefile                 |   49 ++
  board/LaCie/netspace_v2/kwbimage.cfg             |  162 +++++++
  board/LaCie/netspace_v2/netspace_v2.c            |  142 ++++++
  board/LaCie/netspace_v2/netspace_v2.h            |   42 ++
  board/armltd/integrator/split_by_variant.sh      |    8 +-
  board/atmel/at91rm9200ek/at91rm9200ek.c          |    7 +
  board/atmel/atstk1000/Makefile                   |    1 -
  board/atmel/atstk1000/flash.c                    |  232 ---------
  board/eukrea/cpuat91/cpuat91.c                   |    8 +
  board/freescale/mx53ard/Makefile                 |   48 ++
  board/freescale/mx53ard/imximage_dd3.cfg         |   96 ++++
  board/freescale/mx53ard/mx53ard.c                |  306 ++++++++++++
  board/keymile/km_arm/km_arm.c                    |   45 ++-
  board/mpl/vcma9/Makefile                         |    4 +-
  board/mpl/vcma9/cmd_vcma9.c                      |   56 +--
  board/mpl/vcma9/config.mk                        |   24 -
  board/mpl/vcma9/flash.c                          |  432 -----------------
  board/mpl/vcma9/lowlevel_init.S                  |  549 
+++++++++++++++++-----
  board/mpl/vcma9/vcma9.c                          |  284 +++--------
  board/mpl/vcma9/vcma9.h                          |  121 +----
  board/syteco/jadecpu/config.mk                   |    1 -
  board/syteco/jadecpu/jadecpu.c                   |    5 +-
  board/ttcontrol/vision2/vision2.c                |   10 +-
  boards.cfg                                       |    9 +-
  common/cmd_bdinfo.c                              |    2 +-
  drivers/gpio/Makefile                            |    1 +
  drivers/gpio/tegra2_gpio.c                       |  255 ++++++++++
  drivers/serial/Makefile                          |    1 -
  drivers/serial/at91rm9200_usart.c                |  126 -----
  include/common.h                                 |    5 +-
  include/configs/B2.h                             |    3 +-
  include/configs/VCMA9.h                          |  249 +++++-----
  include/configs/apollon.h                        |    4 +
  include/configs/assabet.h                        |    2 +-
  include/configs/at91rm9200ek.h                   |   10 +-
  include/configs/atstk1002.h                      |    9 +-
  include/configs/atstk1003.h                      |    9 +-
  include/configs/atstk1004.h                      |    9 +-
  include/configs/atstk1006.h                      |    9 +-
  include/configs/ca9x4_ct_vxp.h                   |    2 +-
  include/configs/cerf250.h                        |    2 +-
  include/configs/cpuat91.h                        |   12 +-
  include/configs/cradle.h                         |    2 +-
  include/configs/csb226.h                         |    2 +-
  include/configs/dnp1110.h                        |    2 +-
  include/configs/eb_cpux9k2.h                     |   10 +-
  include/configs/efikamx.h                        |    2 +-
  include/configs/evb4510.h                        |    3 +-
  include/configs/gcplus.h                         |    2 +-
  include/configs/innokom.h                        |    2 +-
  include/configs/jadecpu.h                        |   24 +-
  include/configs/jornada.h                        |    2 +-
  include/configs/km/km_arm.h                      |   32 +-
  include/configs/{suen3.h => km_kirkwood.h}       |   18 +-
  include/configs/lart.h                           |    2 +-
  include/configs/lubbock.h                        |    2 +-
  include/configs/mgcoge3un.h                      |    6 +
  include/configs/mx51evk.h                        |    2 +-
  include/configs/mx53ard.h                        |  198 ++++++++
  include/configs/mx53evk.h                        |    2 +-
  include/configs/netspace_v2.h                    |  162 +++++++
  include/configs/omap4_panda.h                    |    8 +-
  include/configs/omap4_sdp4430.h                  |    8 +-
  include/configs/pleb2.h                          |    2 +-
  include/configs/portl2.h                         |   81 ++++
  include/configs/pxa255_idp.h                     |    2 +-
  include/configs/s5pc210_universal.h              |    2 +-
  include/configs/shannon.h                        |    2 +-
  include/configs/suen8.h                          |   50 --
  include/configs/tegra2-common.h                  |    4 +-
  include/configs/trizepsiv.h                      |    2 +-
  include/configs/vision2.h                        |    2 +-
  include/configs/xaeniax.h                        |    2 +-
  include/configs/xm250.h                          |    2 +-
  include/configs/zylonite.h                       |    2 +-
  119 files changed, 4218 insertions(+), 2092 deletions(-)

create mode 100644 arch/arm/cpu/arm920t/at91/at91rm9200_devices.c create mode 100644 arch/arm/cpu/arm920t/at91/clock.c create mode 100644 arch/arm/cpu/arm920t/at91/cpu.c create mode 100644 arch/arm/cpu/armv7/cache_v7.c delete mode 100644 arch/arm/cpu/armv7/omap3/cache.S create mode 100644 arch/arm/include/asm/armv7.h
create mode 100644 arch/arm/include/asm/gpio.h
create mode 100644 arch/arm/include/asm/pl310.h
create mode 100644 arch/arm/include/asm/utils.h
create mode 100644 arch/arm/lib/cache-pl310.c
create mode 100644 board/LaCie/netspace_v2/Makefile create mode 100644 board/LaCie/netspace_v2/kwbimage.cfg create mode 100644 board/LaCie/netspace_v2/netspace_v2.c create mode 100644 board/LaCie/netspace_v2/netspace_v2.h delete mode 100644 board/atmel/atstk1000/flash.c create mode 100644 board/freescale/mx53ard/Makefile create mode 100644 board/freescale/mx53ard/imximage_dd3.cfg create mode 100644 board/freescale/mx53ard/mx53ard.c delete mode 100644 board/mpl/vcma9/config.mk
delete mode 100644 board/mpl/vcma9/flash.c
delete mode 100644 board/syteco/jadecpu/config.mk create mode 100644 drivers/gpio/tegra2_gpio.c
delete mode 100644 drivers/serial/at91rm9200_usart.c rename include/configs/{suen3.h => km_kirkwood.h} (77%) create mode 100644 include/configs/mx53ard.h
create mode 100644 include/configs/netspace_v2.h create mode 100644 include/configs/portl2.h
delete mode 100644 include/configs/suen8.h

Amicalement,

Signature · 1 line
Albert.
#1 lore raw

Dear all,

Am 30.06.2011 um 13:16 schrieb Albert ARIBAUD:

<snip>

Quoted 2 lines

Andreas Bie?mann (1):

      atstk100x: switch to common cfi driver

<snip>

Quoted 9 lines

andreas.devel at googlemail.com (8):
at91rm9200.h: fix ATMEL_PMX_AA_TXD2
arm920t/at91: add clock.c
arm920t/at91: use new clock.c features
arm920t/at91: add at91rm9200_devices.c
at91rm9200ek: use atmel_usart
eb_cpux9k2: use atmel_usart
cpuat91: use atmel_usart
driver/serial: delete at91rm9200_usart

why is in the second block my clear name replaced by email address (as in the commits in atmel/master) but the mails have correct (UTF8-formattet) clear name in 'From:'?

regards

Andreas Bie?mann

#2 lore raw

Le 01/07/2011 08:22, Andreas Bie?mann a ?crit :

Quoted 21 lines

Dear all,

Am 30.06.2011 um 13:16 schrieb Albert ARIBAUD:

<snip>

Quoted 2 lines

Andreas Bie?mann (1):

       atstk100x: switch to common cfi driver

<snip>

Quoted 9 lines

andreas.devel at googlemail.com (8):
at91rm9200.h: fix ATMEL_PMX_AA_TXD2
arm920t/at91: add clock.c
arm920t/at91: use new clock.c features
arm920t/at91: add at91rm9200_devices.c
at91rm9200ek: use atmel_usart
eb_cpux9k2: use atmel_usart
cpuat91: use atmel_usart
driver/serial: delete at91rm9200_usart

Quoted 1 line

why is in the second block my clear name replaced by email address (as in the commits in atmel/master) but the mails have correct (UTF8-formattet) clear name in 'From:'?

Hmm... Sorry for not having noticed this. Apparently, it is already so in u-boot-atmel/. I have just created a branch out of the current u-boot/master, run 'pwclient get 100074' and 'git am', and your name appears as normal.

Reinhard, what commands did you use to applie these patches?

Wolfgang, please hold the pulling until we sort this out. Sorry for the repeated inconvenience. :(

Quoted 3 lines

regards

Andreas Bie?mann

Amicalement,

Signature · 1 line
Albert.
#3 lore raw

Dear All,

Quoted 9 lines

Le 01/07/2011 08:22, Andreas Bie?mann a ?crit :

Quoted 8 lines

Dear all,

Am 30.06.2011 um 13:16 schrieb Albert ARIBAUD:

<snip>

Quoted 2 lines

Andreas Bie?mann (1):

       atstk100x: switch to common cfi driver

Patchwork says: Signed-off-by: Andreas Bie?mann <[email protected]>

Saved mbix file starts like:

#4 lore raw

Am 01.07.2011 12:05, schrieb Reinhard Meyer:

...

Quoted 9 lines
Quoted 5 lines
Quoted 1 line

why is in the second block my clear name replaced by email address (as in the commits in atmel/master) but the mails have correct (UTF8-formattet) clear name in 'From:'?

Hmm... Sorry for not having noticed this. Apparently, it is already so in u-boot-atmel/. I have just created a branch out of the current u-boot/master, run 'pwclient get 100074' and 'git am', and your name appears as normal.

Reinhard, what commands did you use to applie these patches?

ALWAYS using patchworks: Download mbox, git-am <the downloaded file>.

Apparently it makes a difference where the mail originated from.

I downloaded pwclient, used 'pwclient get' and 'git-am' and get the same different results, depending on where the patch mail originated from. I used patches 100071 and 102387 to test.

git is version 1.5.6.5

Reinhard

#12 lore raw
In reply to Reinhard Meyer

Dear Reinhard Meyer,

Am 01.07.2011 12:05, schrieb Reinhard Meyer:

Quoted 17 lines

Dear All,

Quoted 9 lines

Le 01/07/2011 08:22, Andreas Bie?mann a ?crit :

Quoted 8 lines

Dear all,

Am 30.06.2011 um 13:16 schrieb Albert ARIBAUD:

<snip>

Quoted 2 lines

Andreas Bie?mann (1):

       atstk100x: switch to common cfi driver

Patchwork says: Signed-off-by: Andreas Bie?mann <[email protected]>

Saved mbix file starts like:

From patchwork Tue Jun 28 14:15:58 2011
Content-Type: text/plain; charset="utf-8"

<snip>

Quoted 1 line

<snip>

Quoted 7 lines

Patchworks says: Signed-off-by: Andreas Bie?mann <[email protected]>

Saved mbox file starts like:

From patchwork Sun Jun 12 11:49:13 2011
Content-Type: text/plain; charset="utf-8"

<snip>

Quoted 7 lines
Quoted 1 line

Reinhard, what commands did you use to applie these patches?

ALWAYS using patchworks: Download mbox, git-am <the downloaded file>.

Apparently it makes a difference where the mail originated from.

Well, if I load the two patchwork ID's 100078 and 102387 both patches are correctly UTF-8 coded. In your mail the '??' is due to wrong conversion on your box -> (charset=windows-1252 == ISO-8859-1 but the mail contains the correctly UTF-8 coded char '?')

try the following:
---8<---
echo -e '\xc3\x9f\x0a' | iconv -f ISO-8859-1 -t UTF-8 echo ? | iconv -f ISO-8859-1 -t UTF-8 --->8---

It should show the same two chars '??' (if your shell environment is set to UTF-8) ...

I guess it has something to do with wrong shell environment settings/misconfigured git/ ... but indeed it is something on your side Reinhard.

I do not insist on modified commits, therefore it could be pulled in mainline. But for the future, Reinhard please check your environment.

regards

Andreas Bie?mann

#14 lore raw
In reply to Reinhard Meyer

Le 01/07/2011 12:05, Reinhard Meyer a ?crit :

Quoted 9 lines
Quoted 5 lines
Quoted 1 line

why is in the second block my clear name replaced by email address (as in the commits in atmel/master) but the mails have correct (UTF8-formattet) clear name in 'From:'?

Hmm... Sorry for not having noticed this. Apparently, it is already so in u-boot-atmel/. I have just created a branch out of the current u-boot/master, run 'pwclient get 100074' and 'git am', and your name appears as normal.

Reinhard, what commands did you use to applie these patches?

ALWAYS using patchworks: Download mbox, git-am<the downloaded file>.

Apparently it makes a difference where the mail originated from.

If you mean it makes a difference whether you download the mbox or use pwclient, I just tried both and got exactly the same .patch file (except for an added "From patchwork" line at the top, due to the mbox format, and a git am of either file results in Andreas' full name and address being shown as author, as expected.

Seems like either "your" and "my" .patch files differ in some way, or our setups (system, locale, git configuration).

Quoted 1 line

Reinhard

Amicalement,

Signature · 1 line
Albert.
#5 lore raw
In reply to Reinhard Meyer

Dear Reinhard Meyer,

Am 01.07.2011 12:47, schrieb Reinhard Meyer:

Quoted 1 line

Am 01.07.2011 12:05, schrieb Reinhard Meyer:

<snip>

Quoted 1 line

git is version 1.5.6.5

can you please try a more recent version?

(squeeze is out since February the 6th this year ;)

regards

Andreas Bie?mann

#15 lore raw
In reply to Albert ARIBAUD

Am 01.07.2011 12:59, schrieb Albert ARIBAUD:

Quoted 13 lines

Le 01/07/2011 12:05, Reinhard Meyer a ?crit :

Quoted 9 lines
Quoted 5 lines
Quoted 1 line

why is in the second block my clear name replaced by email address (as in the commits in atmel/master) but the mails have correct (UTF8-formattet) clear name in 'From:'?

Hmm... Sorry for not having noticed this. Apparently, it is already so in u-boot-atmel/. I have just created a branch out of the current u-boot/master, run 'pwclient get 100074' and 'git am', and your name appears as normal.

Reinhard, what commands did you use to applie these patches?

ALWAYS using patchworks: Download mbox, git-am<the downloaded file>.

Apparently it makes a difference where the mail originated from.

Quoted 7 lines

If you mean it makes a difference whether you download the mbox or use pwclient, I just tried both and got exactly the same .patch file (except for an added "From patchwork" line at the top, due to the mbox format, and a git am of either file results in Andreas' full name and address being shown as author, as expected.

Seems like either "your" and "my" .patch files differ in some way, or our setups (system, locale, git configuration).

Quoted 1 line

Reinhard

Amicalement,

I mean that it makes no difference whether I get the .patch files by "mbox" or by "pwclient".

What makes a difference is whether the patch was sent via googlemail or not.

Apparently the subtle differences lead to different interpretation by git-am.

If that is a configuration issue, I do now know where to look at.

Reinhard

#13 lore raw
In reply to Andreas Bießmann

Hi all,

Le 01/07/2011 12:55, Andreas Bie?mann a ?crit :

Quoted 2 lines

I do not insist on modified commits, therefore it could be pulled in mainline. But for the future, Reinhard please check your environment.

We are right at the beginning of the merge window, so the pull is not urgent, and I prefer that we have proper patch author attribution, name included. If Reinhard can identify the issue and wishes to re-issue a pull request (based on the same u-boot-arm commit as the original one), that's fine with me, I'll wait.

Quoted 3 lines

regards

Andreas Bie?mann

Amicalement,

Signature · 1 line
Albert.
#6 lore raw
In reply to Andreas Bießmann

Dear Andreas Bie?mann,

Quoted 5 lines

Dear Reinhard Meyer,

Am 01.07.2011 12:47, schrieb Reinhard Meyer:

Quoted 1 line

Am 01.07.2011 12:05, schrieb Reinhard Meyer:

Quoted 7 lines

<snip>

Quoted 1 line

git is version 1.5.6.5

can you please try a more recent version?

(squeeze is out since February the 6th this year ;)

my time is *very* limited right now, and I honestly am not up to updating git every few months...

Best Regards,
Reinhard

#7 lore raw

Dear Reinhard Meyer,

Am 01.07.2011 13:07, schrieb Reinhard Meyer:

Quoted 8 lines

Dear Andreas Bie?mann,

Quoted 7 lines

Dear Reinhard Meyer,

Am 01.07.2011 12:47, schrieb Reinhard Meyer:

Quoted 1 line

Am 01.07.2011 12:05, schrieb Reinhard Meyer:

<snip>

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

git is version 1.5.6.5

can you please try a more recent version?

(squeeze is out since February the 6th this year ;)

my time is *very* limited right now,

like most of us ...

Quoted 2 lines

and I honestly am not up to
updating git every few months...

But 1.5.6.5 is really old version. I do have an old virtual machine running lenny and give it a try. I will check, if git version is the root cause of this problem (what I think it is). You could - if you really have lenny installed - give lenny-backports repository a try:
http://packages.debian.org/lenny-backports/git

regards

Andreas Bie?mann

#8 lore raw

Dear Reinhard Meyer,

Am 01.07.2011 13:14, schrieb Andreas Bie?mann:

Quoted 21 lines

Dear Reinhard Meyer,

Am 01.07.2011 13:07, schrieb Reinhard Meyer:

Quoted 8 lines

Dear Andreas Bie?mann,

Quoted 7 lines

Dear Reinhard Meyer,

Am 01.07.2011 12:47, schrieb Reinhard Meyer:

Quoted 1 line

Am 01.07.2011 12:05, schrieb Reinhard Meyer:

<snip>

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

git is version 1.5.6.5

can you please try a more recent version?

(squeeze is out since February the 6th this year ;)

my time is *very* limited right now,

like most of us ...

Quoted 8 lines
Quoted 2 lines

and I honestly am not up to
updating git every few months...

But 1.5.6.5 is really old version. I do have an old virtual machine running lenny and give it a try. I will check, if git version is the root cause of this problem (what I think it is). You could - if you really have lenny installed - give lenny-backports repository a try:
http://packages.debian.org/lenny-backports/git

I can reproduce this behaviour with my lenny vm. I strongly suggest you update your git to a more recent version. You will get similar problems in future. If you really have debian lenny running and fear the move to current stable you could give lenny-backports a try, there is git 1.7.2.3 with some debian changes available and will _not_ pull a lot of libc changes in.

regards

Andreas Bie?mann

#9 lore raw
In reply to Andreas Bießmann

Dear Andreas Bie?mann,

Quoted 21 lines

Dear Reinhard Meyer,

Am 01.07.2011 13:07, schrieb Reinhard Meyer:

Quoted 8 lines

Dear Andreas Bie?mann,

Quoted 7 lines

Dear Reinhard Meyer,

Am 01.07.2011 12:47, schrieb Reinhard Meyer:

Quoted 1 line

Am 01.07.2011 12:05, schrieb Reinhard Meyer:

<snip>

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

git is version 1.5.6.5

can you please try a more recent version?

(squeeze is out since February the 6th this year ;)

my time is *very* limited right now,

like most of us ...

Quoted 8 lines
Quoted 2 lines

and I honestly am not up to
updating git every few months...

But 1.5.6.5 is really old version. I do have an old virtual machine running lenny and give it a try. I will check, if git version is the root cause of this problem (what I think it is). You could - if you really have lenny installed - give lenny-backports repository a try:
http://packages.debian.org/lenny-backports/git

If I remember correctly, I installed that version not even a year ago.

On another thought, I long wanted to move from a "real" machine to a virtual one, therefore I already have ubuntu-10.10 running in a VM and the git there is 1.7.1.
I *just* have to move all other relevant files there ;)
I think getting it *all* up would take a good afternoon ;)

I'll see what I can do.

Best Regards,
Reinhard

#10 lore raw

Am 01.07.2011 13:47, schrieb Reinhard Meyer:

Quoted 4 lines

Dear Andreas Bie?mann,

Quoted 3 lines

Dear Reinhard Meyer,

Am 01.07.2011 13:07, schrieb Reinhard Meyer:

<snip>

Quoted 1 line

If I remember correctly, I installed that version not even a year ago.

Well ... git is moving fast ;)

Quoted 3 lines

On another thought, I long wanted to move from a "real" machine to a virtual one, therefore I already have ubuntu-10.10 running in a VM and the git there is 1.7.1.

That sounds really good.

Quoted 4 lines

I *just* have to move all other relevant files there ;) I think getting it *all* up would take a good afternoon ;)

I'll see what I can do.

good luck.

regards

Andreas Bie?mann

#11 lore raw
In reply to Reinhard Meyer

Hi Reinhard,

Le 01/07/2011 13:47, Reinhard Meyer a ?crit :

Quoted 3 lines

I *just* have to move all other relevant files there ;) I think getting it *all* up would take a good afternoon ;) I'll see what I can do.

Are you going to fix the author names in your pull request? If not, I'll fix that locally in u-boot-arm and re-issue a pull request -- unless wolfgang NAKs me doing it.

Quoted 2 lines

Best Regards,
Reinhard

Amicalement,

Signature · 1 line
Albert.
#16 lore raw
In reply to Andreas Bießmann

Hallo Andreas,

Le 01/07/2011 08:22, Andreas Bie?mann a ?crit :

Quoted 21 lines

Dear all,

Am 30.06.2011 um 13:16 schrieb Albert ARIBAUD:

<snip>

Quoted 2 lines

Andreas Bie?mann (1):

       atstk100x: switch to common cfi driver

<snip>

Quoted 9 lines

andreas.devel at googlemail.com (8):
at91rm9200.h: fix ATMEL_PMX_AA_TXD2
arm920t/at91: add clock.c
arm920t/at91: use new clock.c features
arm920t/at91: add at91rm9200_devices.c
at91rm9200ek: use atmel_usart
eb_cpux9k2: use atmel_usart
cpuat91: use atmel_usart
driver/serial: delete at91rm9200_usart

Quoted 1 line

why is in the second block my clear name replaced by email address (as in the commits in atmel/master) but the mails have correct (UTF8-formattet) clear name in 'From:'?

I was starting to fix the commits in the second block but I notice that they mention a different e-mail address for you than the first, isolated commit, which has "Andreas Bie?mann <[email protected]>".

Do you confirm that this is normal? And if not, which address is the correct one?

Quoted 3 lines

regards

Andreas Bie?mann

Amicalement,

Signature · 1 line
Albert.
#17 lore raw

Dear Albert Aribaud,

Am 03.07.2011 um 22:04 schrieb Albert ARIBAUD:

Quoted 24 lines

Hallo Andreas,

Le 01/07/2011 08:22, Andreas Bie?mann a ?crit :

Quoted 21 lines

Dear all,

Am 30.06.2011 um 13:16 schrieb Albert ARIBAUD:

<snip>

Quoted 2 lines

Andreas Bie?mann (1):

      atstk100x: switch to common cfi driver

<snip>

Quoted 9 lines

andreas.devel at googlemail.com (8):
at91rm9200.h: fix ATMEL_PMX_AA_TXD2
arm920t/at91: add clock.c
arm920t/at91: use new clock.c features
arm920t/at91: add at91rm9200_devices.c
at91rm9200ek: use atmel_usart
eb_cpux9k2: use atmel_usart
cpuat91: use atmel_usart
driver/serial: delete at91rm9200_usart

Quoted 3 lines
Quoted 1 line

why is in the second block my clear name replaced by email address (as in the commits in atmel/master) but the mails have correct (UTF8-formattet) clear name in 'From:'?

I was starting to fix the commits in the second block but I notice that they mention a different e-mail address for you than the first, isolated commit, which has "Andreas Bie?mann <[email protected]>".

the first one (corscience.de) is also correct. I get paid for some of my u-boot contribution (especially the avr32 stuff) and like to separate the stuff I do at work and the stuff I do for my own (gmail address).

regards

Andreas Bie?mann

#18 lore raw

Le 03/07/2011 22:23, Andreas Bie?mann a ?crit :

Quoted 28 lines

Dear Albert Aribaud,

Am 03.07.2011 um 22:04 schrieb Albert ARIBAUD:

Quoted 24 lines

Hallo Andreas,

Le 01/07/2011 08:22, Andreas Bie?mann a ?crit :

Quoted 21 lines

Dear all,

Am 30.06.2011 um 13:16 schrieb Albert ARIBAUD:

<snip>

Quoted 2 lines

Andreas Bie?mann (1):

       atstk100x: switch to common cfi driver

<snip>

Quoted 9 lines

andreas.devel at googlemail.com (8):
at91rm9200.h: fix ATMEL_PMX_AA_TXD2
arm920t/at91: add clock.c
arm920t/at91: use new clock.c features
arm920t/at91: add at91rm9200_devices.c
at91rm9200ek: use atmel_usart
eb_cpux9k2: use atmel_usart
cpuat91: use atmel_usart
driver/serial: delete at91rm9200_usart

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

why is in the second block my clear name replaced by email address (as in the commits in atmel/master) but the mails have correct (UTF8-formattet) clear name in 'From:'?

I was starting to fix the commits in the second block but I notice that they mention a different e-mail address for you than the first, isolated commit, which has "Andreas Bie?mann<[email protected]>".

the first one (corscience.de) is also correct. I get paid for some of my u-boot contribution (especially the avr32 stuff) and like to separate the stuff I do at work and the stuff I do for my own (gmail address).

Ok, then, I'll keep the addresses as-is, and just add "Andreas Bie?man" where it is missing before the address.

Quoted 3 lines

regards

Andreas Bie?mann

Amicalement,

Signature · 1 line
Albert.