Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips
PATCH v2 1/3 Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips
The delay before the chip can be accessed after reset varies between different chips in maXTouch family. Waiting for 200ms and then monitoring the CHG (chip is ready when the line is low) is guaranteed to work with all chips.
v2: At Dmitry's suggestion, add a timeout so we are not stuck looping endlessly in case the CHG is not going low.
--- drivers/input/touchscreen/atmel_mxt_ts.c | 9 ++++++++- include/linux/i2c/atmel_mxt_ts.h | 1 + 2 files changed, 9 insertions(+), 1 deletions(-)
drivers/input/touchscreen/atmel_mxt_ts.c +8 -1
@@ -170,7 +170,7 @@#define MXT_BOOT_VALUE 0xa5#define MXT_BACKUP_VALUE 0x55#define MXT_BACKUP_TIME 25/* msec */ -#define MXT_RESET_TIME 65/* msec */ +#define MXT_RESET_TIME 200/* msec */ #define MXT_FWRESET_TIME 175/* msec */
@@ -792,6 +792,7 @@ static int mxt_initialize(struct mxt_data *data)struct i2c_client *client = data->client;struct mxt_info *info = &data->info;int error; +int reset_timeout =0 ;u8 val; error =mxt_get_info (data);
@@ -828,6 +829,12 @@ static int mxt_initialize(struct mxt_data *data)mxt_write_object (data,MXT_GEN_COMMAND ,MXT_COMMAND_RESET ,1 );msleep (MXT_RESET_TIME ); +while ((reset_timeout++ <=100 ) && data->pdata->read_chg ()) +msleep (2 ); +if (reset_timeout >=100 ) { +dev_err (&client->dev,"No response after reset!\n" ); +return -EIO ; + }/* Update matrix size at info struct */ error =mxt_read_reg (client,MXT_MATRIX_X_SIZE , &val);
include/linux/i2c/atmel_mxt_ts.h +1 -0
@@ -39,6 +39,7 @@ struct mxt_platform_data {unsigned int voltage;unsigned char orient;unsigned long irqflags; + u8(*read_chg) (void); };#endif /* __LINUX_ATMEL_MXT_TS_H */
Signature · 1 line
1.7.0.4
Hi,
Quoted 3 lines · Iiro Valkonen
The delay before the chip can be accessed after reset varies between different chips in maXTouch family. Waiting for 200ms and then monitoring the CHG (chip is ready when the line is low) is guaranteed to work with all chips.
I wonder 200ms waiting needs indeed, it is very long time. If monitoring the CHG line can detect the completion of reset, 200ms waiting can be removed?
Quoted 32 lines
v2: At Dmitry's suggestion, add a timeout so we are not stuck looping endlessly in case the CHG is not going low.
Signed-off-by Iiro Valkonen<[email protected]>--- drivers/input/touchscreen/atmel_mxt_ts.c | 9 ++++++++- include/linux/i2c/atmel_mxt_ts.h | 1 + 2 files changed, 9 insertions(+), 1 deletions(-)drivers/input/touchscreen/atmel_mxt_ts.c +2
-1@@ -170,7 +170,7 @@#define MXT_BOOT_VALUE 0xa5#define MXT_BACKUP_VALUE 0x55#define MXT_BACKUP_TIME 25/* msec */ -#define MXT_RESET_TIME 65/* msec */ +#define MXT_RESET_TIME 200/* msec */ #define MXT_FWRESET_TIME 175/* msec */ @@ -792,6 +792,7 @@ static int mxt_initialize(struct mxt_data *data)struct i2c_client *client = data->client;struct mxt_info *info =&data->info;int error; +int reset_timeout =0 ;u8 val; error =mxt_get_info (data);
drivers/input/touchscreen/atmel_mxt_ts.c static int mxt_initialize(struct mxt_data *data) · line 832
Quoted 4 lines
drivers/input/touchscreen/atmel_mxt_ts.c +1
-0@@ -828,6 +829,12 @@ static int mxt_initialize(struct mxt_data *data)mxt_write_object (data,MXT_GEN_COMMAND ,MXT_COMMAND_RESET ,1 );msleep (MXT_RESET_TIME ); +while ((reset_timeout++<=100 )&& data->pdata->read_chg ())
If pdata->read_chg is NULL?
Quoted 13 lines
drivers/input/touchscreen/atmel_mxt_ts.c +5
-0+msleep (2 ); +if (reset_timeout>=100 ) { +dev_err (&client->dev,"No response after reset!\n" ); +return -EIO ; + }/* Update matrix size at info struct */ error =mxt_read_reg (client,MXT_MATRIX_X_SIZE ,&val);include/linux/i2c/atmel_mxt_ts.h +0
-0
include/linux/i2c/atmel_mxt_ts.h struct mxt_platform_data { · line 45
Quoted 7 lines
include/linux/i2c/atmel_mxt_ts.h +1
-0@@ -39,6 +39,7 @@ struct mxt_platform_data {unsigned int voltage;unsigned char orient;unsigned long irqflags; + u8(*read_chg) (void); };#endif /* __LINUX_ATMEL_MXT_TS_H */
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello,
Quoted 11 lines · Joonyoung Shim
Hi,
Quoted 3 lines · Iiro Valkonen
The delay before the chip can be accessed after reset varies between different chips in maXTouch family. Waiting for 200ms and then monitoring the CHG (chip is ready when the line is low) is guaranteed to work with all chips.
I wonder 200ms waiting needs indeed, it is very long time. If monitoring the CHG line can detect the completion of reset, 200ms waiting can be removed?
Yes, 200ms is a bit longish. But it is what we need to guarantee correct functionality with all chips in all situations. I would prefer to see that in the mainline version. Anyone worried about the delay could maybe adjust the value to suit his/her needs, for example with mXT224 you could get away with using just 65ms, like in the original version. Another option would be to check the family ID in the driver, and wait just long enough. Drawback with that is that the driver (possibly) needs updating with every new chip. I'd like to keep this simple & robust, wait 200ms which works for every current (and most likely with every upcoming) chip, and take the small delay penalty.
Quoted 8 lines
drivers/input/touchscreen/atmel_mxt_ts.c static int mxt_initialize(struct mxt_data *data) · line 832
Quoted 5 lines
drivers/input/touchscreen/atmel_mxt_ts.c +1
-0@@ -828,6 +829,12 @@ static int mxt_initialize(struct mxt_data *data)mxt_write_object (data,MXT_GEN_COMMAND ,MXT_COMMAND_RESET ,1 );msleep (MXT_RESET_TIME ); +while ((reset_timeout++<=100 )&& data->pdata->read_chg ())If
pdata->read_chgis NULL?
Hopefully it'll never be, but I'll add a check.
Thank you for the comments.
Signature · 5 lines
Iiro -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 14 lines · Iiro Valkonen
Hello,
Quoted 11 lines · Joonyoung Shim
Hi,
Quoted 3 lines · Iiro Valkonen
The delay before the chip can be accessed after reset varies between different chips in maXTouch family. Waiting for 200ms and then monitoring the CHG (chip is ready when the line is low) is guaranteed to work with all chips.
I wonder 200ms waiting needs indeed, it is very long time. If monitoring the CHG line can detect the completion of reset, 200ms waiting can be removed?
My question is monitoring the CHG line can substitute "msleep(MXT_RESET_TIME)"? In other words, i want to remove msleep(MXT_RESET_TIME) and add only waiting until CHG line is low.
Quoted 11 lines
Yes, 200ms is a bit longish. But it is what we need to guarantee correct functionality with all chips in all situations. I would prefer to see that in the mainline version. Anyone worried about the delay could maybe adjust the value to suit his/her needs, for example with mXT224 you could get away with using just 65ms, like in the original version. Another option would be to check the family ID in the driver, and wait just long enough. Drawback with that is that the driver (possibly) needs updating with every new chip. I'd like to keep this simple& robust, wait 200ms which works for every current (and most likely with every upcoming) chip, and take the small delay penalty.
The 200ms delay is sometimes a problem for fastbooting, and if each chip has different delay value, i think it's better that driver supports suitable delay value of the chip because it isn't difficult stuff. --
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html