Is perf sample/hw_breakpoint/data_breakpoint.ko suppose to work on guest vm?

I was experimenting with data_breakpoint.ko in the kernel samples/hw_breakpoint directory. The example works on the raw hardware, but does not appear to work on the guest vm. The hardware breakpoint on guest vm registers without an error, but there are never any breakpoints encountered on the guest vm.

Hardware is a Quad-Core AMD Opteron(tm) Processor 2350 running an updated version of Fedora 15 x86-64 and linux-3.0.0-rc7+ kernel, and qemu-0.14.0-7.1.fc15.x86_64. The guest vm on the machine is also Fedora 15 x86-64 and linux-3.0.0-rc7+ kernel.

On the host I run load the hw_breakpoint.ko module with "insmod hw_breakpoint.ko" I get back traces as expected like the following:

Jul 13 14:20:24 dhcp231-201 kernel: [ 1839.715091] Dump stack from sample_hbp_handler
Jul 13 14:20:25 dhcp231-201 kernel: [ 1840.786672] pid_max value is changed
Jul 13 14:20:25 dhcp231-201 kernel: [ 1840.786686] Pid: 17372, comm: su Not tainted 3.0.0-rc7+ #1
Jul 13 14:20:25 dhcp231-201 kernel: [ 1840.786694] Call Trace:
Jul 13 14:20:25 dhcp231-201 kernel: [ 1840.786700]  <#DB>  [<ffffffffa0475023>] sample_hbp_handler+0x23/0x34 [data_breakpoint]
Jul 13 14:20:25 dhcp231-201 kernel: [ 1840.786734]  [<ffffffff810e4e24>] __perf_event_overflow+0x118/0x1b9
Jul 13 14:20:25 dhcp231-201 kernel: [ 1840.786748]  [<ffffffff810885b6>] ? __l

...

When I do the same on the guest vm I never see any backtraces due to the data location being read or written. The guest vm doesn't report that hardware breakpoints are unavailable. There just doesn't appear to be any hits of the hardware breakpoint when used within the guest vm. All the output from the hw_breakpoint.ko module for the guest vm is:

Jul 13 15:49:19 f15-x86-64 kernel: [ 1701.968294] HW Breakpoint for pid_max write installed
Jul 13 15:49:51 f15-x86-64 kernel: [ 1733.100810] HW Breakpoint for pid_max write uninstalled

If you don't have the sample modules available, there is a similar test using the perf command. On raw machine:

# more /proc/kallsyms |grep pid_max$
ffffffff81a264e8 D pid_max
# sudo perf stat -a --event=mem:0xffffffff81a264e8 bash
...
# exit
exit

Performance counter stats for 'bash':

                18 unknown                 

        7.141821652  seconds time elapsed

On guest vm never get any breakpoint hits:
# more /proc/kallsyms |grep pid_max$
ffffffff81a264e8 D pid_max

# perf stat -a --event=mem:0xffffffff81a264e8 bash
...
# exit
exit

Performance counter stats for 'bash':

                 0 unknown                 

       34.924628839  seconds time elapsed

Any thoughts why hardware breakpoints don't work on guest vm?

-Will