Skip to contentSkip to conversation

Realistic bandwidth to get through ehci controller on a dm3730?

DISCUSSION Jonathan Cameron 2 participants 2 messages Jul 14, 2011 – Jul 17, 2011 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hi All,

Just wondering if anyone had any figures for how much data one can expect the omap3's usb controller to handle?

I'm trying to get a playstation eye (ov534) camera to run as at 60fps, but gspca is giving me payload errors at 50fps or 60fps. (50*640*480 bytes per sec, or about 122Mbits / sec (15MB / sec)

Quick and dirty tests of the beagle xm's network adapter suggest about 4MB/s so even at 40 fps when the camera is fine, I'm way above that.

Anyhow. Basically I'm trying to work out if I've run into a brick wall or if it is worth more time to get this to work?

Thanks,

Jonathan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 4E1F07BF.5090105-KWPb1pKIrIJaa/[email protected]

#2 lore raw

Hi,

Quoted 8 lines · Jonathan Cameron

Hi All,

Just wondering if anyone had any figures for how much data one can expect the omap3's usb controller to handle?

I'm trying to get a playstation eye (ov534) camera to run as at 60fps, but gspca is giving me payload errors at 50fps or 60fps. (50*640*480 bytes per sec, or about 122Mbits / sec (15MB / sec)

As far as I know, uvc can work well at 3*1024B/uF(24MB/s) in beagle xm, and it uses ISO transfer.

I don't know if gspca uses ISO endpoint to transfer stream data. If it uses bulk to transfer video data, it will share the usb bandwidth with other devices.

thanks,

Signature · 5 lines
Ming Lei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html