Skip to contentSkip to conversation

ARM OABI build broken with current buildroot tip

Buildroot David J. Fiddes 2 participants 3 messages Jul 17, 2011 – Jul 18, 2011

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to build an up to date ARM OABI toolchain with uClibc 0.9.32. The build fails with a missing stack unwind symobl.

The toolchain I'm trying to configure is pretty straight forward. From a "make distclean" I configure:
- ARM processor
- OABI
- Disable busybox and filesystem image generation

Switching uClibc to 0.9.31 allows the build to succeed.

I'm using buildroot: bef98b7c10a9969bc3f8b977dd9e0bdafba684a3

The build error is:

/usr/bin/make -j1 -C

/home/dave/source/cvs-versions/buildroot/output/toolchain/uClibc-0.9.32 \
	ARCH="arm" \
	PREFIX=/home/dave/source/cvs-versions/buildroot/output/host/usr/arm-unknown-linux-uclibc/sysroot \
	DEVEL_PREFIX=/usr/ \
	RUNTIME_PREFIX=/ \
	install_runtime install_dev

make[1]: Entering directory `/home/dave/source/cvs-versions/buildroot/output/toolchain/uClibc-0.9.32'
LD libuClibc-0.9.32.so
libc/libc_so.a(close.oS):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'
collect2: ld returned 1 exit status
make[1]: *** [lib/libc.so] Error 1
make[1]: Leaving directory `/home/dave/source/cvs-versions/buildroot/output/toolchain/uClibc-0.9.32'
make: *** [/home/dave/source/cvs-versions/buildroot/output/host/usr/arm-unknown-linux-uclibc/sysroot/usr/lib/libc.a] Error 2

It seems like this is a uClibc bug but I'm not sure how best to separate the toolchain build form the uClibc build.

Dave

#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"David" == David J Fiddes <[email protected]> writes:

David> Hi,
David> I'm trying to build an up to date ARM OABI toolchain with uClibc David> 0.9.32. The build fails with a missing stack unwind symobl.

David> The toolchain I'm trying to configure is pretty straight forward. From David> a "make distclean" I configure:

 David>  - ARM processor
 David>  - OABI
 David>  - Disable busybox and filesystem image generation

David> Switching uClibc to 0.9.31 allows the build to succeed.

The problem is NPTL threading support. A quick look in libpthread/nptl/sysdeps/arm shows a number of EABI references. It seems like NPTL on ARM is only supported with EABI.

And indeed, OABI / uClibc 0.9.32 / linuxthreads-old builds fine.

I'll adjust Buildroot so you cannot select NTPL together with OABI.

David> It seems like this is a uClibc bug but I'm not sure how best to David> separate the toolchain build form the uClibc build.

It looks pretty independent of anything Buildroot related. You are welcome to ask them regarding non-EABI NPTL support, but I would imagine that such an uncommon configuration has fairly low priority.

May I ask why you want to use a new C library / NPTL together with the obsolete OABI?

Signature · 1 line
Bye, Peter Korsgaard
#2 lore raw

Hi Peter,

Quoted 3 lines

The problem is NPTL threading support. A quick look in libpthread/nptl/sysdeps/arm shows a number of EABI references. It seems like NPTL on ARM is only supported with EABI.

Ah. That's a bit of a show stopper.

Quoted 2 lines

May I ask why you want to use a new C library / NPTL together with the obsolete OABI?

I have a very large multi-threaded C++ app and a custom embedded Linux platform that have historically been developed at different times. The SW is now over 10 years old and I fear change so just stuck to the ABI that has always worked...

Probably time to bite the bullet and move our kernel to EABI for our next major release.

thanks,

Dave