preferred version not available
Quoted 7 lines · Detlef Vollmann
NOTE: preferred version githead of linux-taurus not available (for item linux-taurus)
What really drives me nuts is the last line: it clearly parsed linux-taurus_githead.bb before, doesn't give me any error on it, but then tells me 'preferred version githead of linux-taurus not available'. It's clearly there, so why is it not available?
Ok, I found the problem: PREFERRED_VERSION refers to PV inside the recipe, not to the part of the filename after '_'. As I tinker with PV inside the recipe, bitbake is actually correct that a PV 'githead' is not available for linux-taurus.
Detlef
Quoted 10 lines · Detlef Vollmann
Quoted 8 lines · Detlef Vollmann
NOTE: preferred version githead of linux-taurus not available (for item linux-taurus)
What really drives me nuts is the last line: it clearly parsed linux-taurus_githead.bb before, doesn't give me any error on it, but then tells me 'preferred version githead of linux-taurus not available'. It's clearly there, so why is it not available?
Quoted 4 lines
Ok, I found the problem:
PREFERRED_VERSIONrefers to PV inside the recipe, not to the part of the filename after '_'. As I tinker with PV inside the recipe, bitbake is actually correct that a PV 'githead' is not available for linux-taurus.
All variables which are typically set by the filename can be overridden. Those are simply defaults. See the definitions of PN, PV, and PR in bitbake.conf.
Signature · 5 lines
Christopher Larson clarson at kergoth dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics
Quoted 9 lines · Chris Larson
Quoted 4 lines · Detlef Vollmann
Ok, I found the problem:
PREFERRED_VERSIONrefers to PV inside the recipe, not to the part of the filename after '_'. As I tinker with PV inside the recipe, bitbake is actually correct that a PV 'githead' is not available for linux-taurus.All variables which are typically set by the filename can be overridden. Those are simply defaults. See the definitions of PN, PV, and PR in bitbake.conf.
Yes, I knew that (I actually wrote the line changing the PV myself). What surprised me (though it makes sense) that PREFERRED_VERSION refers to PV, and not directly to a part of the filename. It's probably still too much of 'make' history in my brain...
Detlef
Hello,
this one really drives me crazy.
Here's what I do:
$ bitbake -D -D -D -D -g linux-taurus | fgrep linux-taurus DEBUG: Cache: /src/ccp-oe/taurus/recipes/linux/linux-taurus_githead.bb is not cached DEBUG: BB /src/ccp-oe/taurus/recipes/linux/linux-taurus_githead.bb: handle(data) DEBUG: LOAD /src/ccp-oe/taurus/recipes/linux/linux-taurus_githead.bb DEBUG: CONF /src/ccp-oe/taurus/recipes/linux/linux-taurus_githead.bb:5: including recipes/linux/ccp-linux.inc DEBUG: providers for linux-taurus are: ['linux-taurus'] NOTE: preferred version githead of linux-taurus not available (for item linux-taurus)
It already starts with the first 'DEBUG' line: Why is it not cached. I have some other recipes for linux-taurus with version numbers that don't get parsed again because they are cached.
But I can live with that.
What really drives me nuts is the last line: it clearly parsed linux-taurus_githead.bb before, doesn't give me any error on it, but then tells me 'preferred version githead of linux-taurus not available'. It's clearly there, so why is it not available?
The interesting thing is that I don't have any problems with my other *_githead.bb recipes, only with the linux kernel...
I'd really appreciate any help!
Detlef
Quoted 9 lines · On Tuesday 19 July 2011 08:20:00 Detlef Vollmann wrote:
Quoted 3 lines · Chris Larson
All variables which are typically set by the filename can be overridden. Those are simply defaults. See the definitions of PN, PV, and PR in bitbake.conf.
Yes, I knew that (I actually wrote the line changing the PV myself). What surprised me (though it makes sense) that
PREFERRED_VERSIONrefers to PV, and not directly to a part of the filename. It's probably still too much of 'make' history in my brain...
I wonder if it would make sense to add something to the error message that also lists the available versions? Then it would be a little more obvious what you need to set PREFERRED_VERSION to.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
Quoted 6 lines · Paul Eggleton
Quoted 5 lines · On Tuesday 19 July 2011 08:20:00 Detlef Vollmann wrote:
Quoted 3 lines · Chris Larson
All variables which are typically set by the filename can be overridden. Those are simply defaults. See the definitions of PN, PV, and PR in bitbake.conf.
Quoted 8 lines
Quoted 4 lines
Yes, I knew that (I actually wrote the line changing the PV myself). What surprised me (though it makes sense) that
PREFERRED_VERSIONrefers to PV, and not directly to a part of the filename. It's probably still too much of 'make' history in my brain...I wonder if it would make sense to add something to the error message that also lists the available versions? Then it would be a little more obvious what you need to set
PREFERRED_VERSIONto.
That would be great.
And while we are in wishlist mode ;-) :
With a high enough debug level (I think 2), you'll get a list of providers for a specific target.
To get also a list of versions for a specific package (PN), would be really helpful.
Detlef
[Resend to bitbake-devel due to new list address]
Quoted 6 lines · Paul Eggleton
Quoted 5 lines · On Tuesday 19 July 2011 08:20:00 Detlef Vollmann wrote:
Quoted 3 lines · Chris Larson
All variables which are typically set by the filename can be overridden. Those are simply defaults. See the definitions of PN, PV, and PR in bitbake.conf.
Quoted 8 lines
Quoted 4 lines
Yes, I knew that (I actually wrote the line changing the PV myself). What surprised me (though it makes sense) that
PREFERRED_VERSIONrefers to PV, and not directly to a part of the filename. It's probably still too much of 'make' history in my brain...I wonder if it would make sense to add something to the error message that also lists the available versions? Then it would be a little more obvious what you need to set
PREFERRED_VERSIONto.
That would be great.
And while we are in wishlist mode ;-) :
With a high enough debug level (I think 2), you'll get a list of providers for a specific target.
To get also a list of versions for a specific package (PN), would be really helpful.
Detlef
Quoted 9 lines · Detlef Vollmann
Quoted 8 lines · Chris Larson
Quoted 5 lines · Detlef Vollmann
Ok, I found the problem:
PREFERRED_VERSIONrefers to PV inside the recipe, not to the part of the filename after '_'. As I tinker with PV inside the recipe, bitbake is actually correct that a PV 'githead' is not available for linux-taurus.
Quoted 7 lines
Quoted 3 lines
All variables which are typically set by the filename can be overridden. Those are simply defaults. See the definitions of PN, PV, and PR in bitbake.conf.
Yes, I knew that (I actually wrote the line changing the PV myself). What surprised me (though it makes sense) that
PREFERRED_VERSIONrefers to PV, and not directly to a part of the filename.
I'm not sure why that would be surprising. PN, PV, and PR are what are used. The fact that they default to being based on the filename is just an artifact of how oe does things. You could quite easily change that, and make it required to set them all in the recipe. Bitbake does *not* care about the filename, other than in determining what bbappend to apply to the recipe when an append exists.
Signature · 5 lines
Christopher Larson clarson at kergoth dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics