mcf5307 support

Hi all,

i would like to contribute and to commit mcf5307 support.

I created all the following files:

arch/m68k/cpu/config.mk
arch/m68k/cpu/cpu.c
arch/m68k/cpu/cpu.h
arch/m68k/cpu/cpu_init.c
arch/m68k/cpu/interrupts.c
arch/m68k/cpu/Makefile
arch/m68k/cpu/speed.c
arch/m68k/cpu/start.S
arch/m68k/include/asm/immap_5307.h
arch/m68k/include/asm/5307.h

and did some little changes in :

arch/m68k/include/asm/cache.h
arch/m68k/include/asm/immap.h
arch/m68k/include/asm/timer.h
include/common.h

I read u-boot site patch section.
Actually my git tree is about a month old.

Unfortunately i don't have much experience with git, and looking for some help:
seems i cannot "git pull" anymore, i am getting an error:

xu at angel7:~/u-boot.git$ git pull
error: Unable to find dbf545f2d11cd3118c6c8b54122adfbe799ea1b8 under
http://git.denx.de/u-boot.git
Cannot obtain needed blob dbf545f2d11cd3118c6c8b54122adfbe799ea1b8 while processing commit e6a857da746d5d7d450e59c0f86664c6b279b1c2.
error: Fetch failed.
xu at angel7:~/u-boot.git$

Is there a way to generate the patch comparing my local tree with a new "git clone" u-boot folder ?
Or otherwise, since i cannot "pull", what would be the correct procedure for the patch now ?

Many Thanks
angelo dureghello

Dear angelo,

You should try unsing git protocol instead of HTTP. Also, make sure to use a recent version of git.

You can export your patches using "git format-patch" and then re-apply these to a (branch in) a fresh clone of the master repo.

In the first step, fix this pull problem.

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are three things I always forget. Names, faces -  the  third  I
can't remember.                                         - Italo Svevo

Hi Wolfgang,

thanks for the help,

I changed url using git, but i still have an issue:

angelo at angel7:~/sysam/amcore/u-boot.git$ git checkout master

M       Makefile
A       arch/m68k/cpu/mcf530x/Makefile
A       arch/m68k/cpu/mcf530x/config.mk
A       arch/m68k/cpu/mcf530x/cpu.c
A       arch/m68k/cpu/mcf530x/cpu.h
A       arch/m68k/cpu/mcf530x/cpu_init.c
A       arch/m68k/cpu/mcf530x/interrupts.c
A       arch/m68k/cpu/mcf530x/speed.c
A       arch/m68k/cpu/mcf530x/start.S
M       arch/m68k/include/asm/cache.h
M       arch/m68k/include/asm/immap.h
M       arch/m68k/include/asm/timer.h
M       boards.cfg
M       include/common.h
M       include/flash.h

Already on 'master'
Your branch is behind 'origin/master' by 331 commits, and can be fast-forwarded.
angelo at angel7:~/sysam/amcore/u-boot.git$ git pull
git://git.denx.de/u-boot.git master
From git://git.denx.de/u-boot
* branch master -> FETCH_HEAD
Updating 6f4dd40..33a6b9e
error: Your local changes to 'Makefile' would be overwritten by merge. Aborting.
Please, commit your changes or stash them before you can merge. angelo at angel7:~/sysam/amcore/u-boot.git$

I don't understand why the Makefile cannot be merged, i just added 2 lines with the target for my custom board.

Thanks
angelo

<http://www.sysam.it>

Dear angelo,

So you have modified files in your tree...

It could probably be merged, if you had used a "git merge" command. You did not, you used "git checkout", which performs a checkout of a specific version in the git repository.

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Faith: not *wanting* to know what is true."    - Friedrich Nietzsche