Pull request: u-boot-arm/master

Hi Wolfgang,

The following changes since commit 6ceb0135f96d73063ffbaab5be7ce23933367388:

Prepare v2011.09 (2011-09-11 21:31:04 +0200)

are available in the git repository at:
git://git.denx.de/u-boot-arm.git master

Aneesh V (4):
omap4: factor out common part from board config headers
omap4: make SDRAM init work for ES1.0 silicon
omap4: IO settings
omap4: fix pad configuration settings for SDP and Panda

Fabio Estevam (2):
MX25: tx25: Fix build by making use of GPIO framework
MX25: tx25: Cleanup tx25.h config

Howard D. Gray (1):
ARMV7: OMAP3: Add 37xx ESx revision numbers.

Jason Kridner (1):
led: remove camel casing of led identifiers globally

Joel A Fernandes (1):
OMAP: Add function to get state of a GPIO output

Michael Jones (2):
ARMV7: OMAP: Write more than 1 byte at a time in i2c_write
ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible

Nagabhushana Netagunte (3):
da830: modify the U-Boot prompt string
da830: enable SPI flash boot mode
da830: modify the MEMTEST start and end address

Sandeep Paulraj (2):
OMAP3 Beagle: Minor config cleanup
DA830: Fix Build Warning

Sanjeev Premi (4):
omap3: beagle: Fix build warning
omap: gpio: Use generic API
omap: gpio: generic changes after changing API
omap: gpio: Adapt board files to use generic API

  arch/arm/cpu/arm1176/start.S                |    2 +-
  arch/arm/cpu/arm720t/start.S                |    2 +-
  arch/arm/cpu/arm920t/ep93xx/led.c           |   24 ++--
  arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S |   10 +-
  arch/arm/cpu/arm920t/start.S                |    2 +-
  arch/arm/cpu/arm925t/start.S                |    2 +-
  arch/arm/cpu/arm926ejs/at91/led.c           |   12 +-
  arch/arm/cpu/arm926ejs/start.S              |    2 +-
  arch/arm/cpu/arm_intcm/start.S              |    2 +-
  arch/arm/cpu/armv7/omap-common/gpio.c       |  105 +++++++++--
  arch/arm/cpu/armv7/omap3/sys_info.c         |   13 ++-
  arch/arm/cpu/armv7/omap4/board.c            |   62 ++++++
  arch/arm/cpu/armv7/omap4/clocks.c           |    5 +-
  arch/arm/cpu/armv7/omap4/emif.c             |   72 +------
  arch/arm/cpu/armv7/omap4/sdram_elpida.c     |   24 ++--
  arch/arm/cpu/ixp/start.S                    |    2 +-
  arch/arm/cpu/s3c44b0/start.S                |    2 +-
  arch/arm/include/asm/arch-omap3/omap3.h     |   10 +
  arch/arm/include/asm/arch-omap4/emif.h      |   23 +--
  arch/arm/include/asm/arch-omap4/omap4.h     |   45 ++++-
  arch/arm/include/asm/omap_gpio.h            |   13 --
  arch/arm/lib/board.c                        |   32 ++--
  board/atmel/at91rm9200ek/led.c              |   12 +-
  board/cm_t35/leds.c                         |   10 +-
  board/comelit/dig297/dig297.c               |   12 +-
  board/eukrea/cpu9260/led.c                  |   48 +++---
  board/isee/igep0020/igep0020.c              |   12 +-
  board/karo/tx25/tx25.c                      |    1 +
  board/logicpd/zoom2/debug_board.c           |   10 +-
  board/logicpd/zoom2/led.c                   |   66 ++++----
  board/logicpd/zoom2/zoom2.c                 |   10 +-
  board/overo/overo.c                         |   54 +++---
  board/ti/beagle/beagle.c                    |   44 ++--
  board/ti/beagle/led.c                       |   26 ++--
  board/ti/evm/evm.c                          |   12 +-
  board/ti/panda/panda_mux_data.h             |   41 ++--
  board/ti/sdp4430/sdp4430_mux_data.h         |    9 +-
  common/cmd_led.c                            |    8 +-
  doc/README.omap3                            |   20 +-
  drivers/i2c/omap24xx_i2c.c                  |  241 
+++++++++++-------------
  include/configs/da830evm.h                  |   18 +-
  include/configs/omap3_beagle.h              |    3 +-
  include/configs/omap4_common.h              |  275 
+++++++++++++++++++++++++++
  include/configs/omap4_panda.h               |  244 
+-----------------------
  include/configs/omap4_sdp4430.h             |  245 
+-----------------------
  include/configs/tx25.h                      |   16 +-
  include/status_led.h                        |   32 ++--
  47 files changed, 916 insertions(+), 1019 deletions(-)

create mode 100644 include/configs/omap4_common.h

Amicalement,

Albert.

Dear Albert ARIBAUD,

Applied, thanks.

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you think the problem is bad now, just wait until we've solved it.
                                                        Epstein's Law