Skip to contentSkip to conversation

subversion-perl missing

DISCUSSION Georg-Johann Lay 6 participants 14 messages Jun 15, 2016

lore
Share & tools
lore
#0 lore raw

Hi, I just downloaded git and built from source, version is

git version 1.7.6.4

I am particularly interested in git-svn, but running it I get complaints

Initialized empty Git repository in /local/Downloads/v4.5.x/.git/ Can't locate SVN/Core.pm in @INC (@INC contains:
/usr/local/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/local/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/5.10.0/i586-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl .) at /usr/local/libexec/git-core/git-svn line 42

I found out that a module like subversion-perl is missing, but installing it via OpenSuse 1.11 would downgrade my SVN installation, so I skipped that.

Thus, being no admin and no perl guy, I am stuck now and am asking here for some kind help, being very well aware that it's not a git issue but just about getting some prerequisite for git.

Where do I have to go to get the svn+perl stuff? Couldn't locate anything like that in subversion.tigris.org, so that I am stuck and need some hints on how to proceed.

Many thanks,

Johann

#1 lore raw

Georg-Johann Lay venit, vidit, dixit 26.09.2011 13:48:

Quoted 17 lines

Hi, I just downloaded git and built from source, version is

git version 1.7.6.4

I am particularly interested in git-svn, but running it I get complaints

Initialized empty Git repository in /local/Downloads/v4.5.x/.git/ Can't locate SVN/Core.pm in @INC (@INC contains:
/usr/local/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/local/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/5.10.0/i586-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl .) at /usr/local/libexec/git-core/git-svn line 42

Quoted 2 lines

I found out that a module like subversion-perl is missing, but installing it via OpenSuse 1.11 would downgrade my SVN installation, so I skipped that.

So, where did you get your svn from? If you compiled it yourself, you should rebuild it with the perl bindings. Make sure you note where you install this to - you may have to adjust your PERL5LIB.

Quoted 11 lines

Thus, being no admin and no perl guy, I am stuck now and am asking here for some kind help, being very well aware that it's not a git issue but just about getting some prerequisite for git.

Where do I have to go to get the svn+perl stuff? Couldn't locate anything like that in subversion.tigris.org, so that I am stuck and need some hints on how to proceed.

Many thanks,

Johann

#2 lore raw
Quoted 18 lines · Michael J Gruber

Georg-Johann Lay venit, vidit, dixit 26.09.2011 13:48:

Quoted 17 lines

Hi, I just downloaded git and built from source, version is

git version 1.7.6.4

I am particularly interested in git-svn, but running it I get complaints

Initialized empty Git repository in /local/Downloads/v4.5.x/.git/ Can't locate SVN/Core.pm in @INC (@INC contains:
/usr/local/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/local/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/5.10.0/i586-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl .) at /usr/local/libexec/git-core/git-svn line 42

Quoted 6 lines
Quoted 2 lines

I found out that a module like subversion-perl is missing, but installing it via OpenSuse 1.11 would downgrade my SVN installation, so I skipped that.

So, where did you get your svn from? If you compiled it yourself, you should rebuild it with the perl bindings. Make sure you note where you install this to - you may have to adjust your PERL5LIB.

Hi Michael

svn identifies itself as

Quoted 1 line

svn --version

svn, version 1.6.2 (r37639)
compiled Jun 19 2009, 12:21:15

Copyright (C) 2000-2009 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
This product includes software developed by CollabNet (http://www.Collab.Net/).

The following repository access (RA) modules are available:

* ra_neon : Module for accessing a repository via WebDAV protocol using Neon.
- handles 'http' scheme
- handles 'https' scheme
* ra_svn : Module for accessing a repository using the svn network protocol.
- with Cyrus SASL authentication
- handles 'svn' scheme
* ra_local : Module for accessing a repository on local disk.
- handles 'file' scheme

and its installed in

Quoted 1 line

which svn

/usr/bin/svn

Quoted 1 line

echo $PERL5LIB

<empty>

so looks like plain vanilla installation/build.

Is "perl bindings" the "subversion-perl" package (which likes to downgrade my svn upon installing in yast)?

Is it a part of SVN (couln't find it there) or of perl?

Quoted 1 line

perl --version says:

This is perl, v5.10.0 built for i586-linux-thread-multi

Copyright 1987-2007, Larry Wall
...

Quoted 11 lines
Quoted 11 lines

Thus, being no admin and no perl guy, I am stuck now and am asking here for some kind help, being very well aware that it's not a git issue but just about getting some prerequisite for git.

Where do I have to go to get the svn+perl stuff? Couldn't locate anything like that in subversion.tigris.org, so that I am stuck and need some hints on how to proceed.

Many thanks,

Johann

#3 lore raw

Georg-Johann Lay venit, vidit, dixit 26.09.2011 15:41:

Quoted 56 lines
Quoted 18 lines · Michael J Gruber

Georg-Johann Lay venit, vidit, dixit 26.09.2011 13:48:

Quoted 17 lines

Hi, I just downloaded git and built from source, version is

git version 1.7.6.4

I am particularly interested in git-svn, but running it I get complaints

Initialized empty Git repository in /local/Downloads/v4.5.x/.git/ Can't locate SVN/Core.pm in @INC (@INC contains:
/usr/local/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/local/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/5.10.0/i586-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl .) at /usr/local/libexec/git-core/git-svn line 42

Quoted 6 lines
Quoted 2 lines

I found out that a module like subversion-perl is missing, but installing it via OpenSuse 1.11 would downgrade my SVN installation, so I skipped that.

So, where did you get your svn from? If you compiled it yourself, you should rebuild it with the perl bindings. Make sure you note where you install this to - you may have to adjust your PERL5LIB.

Hi Michael

svn identifies itself as

Quoted 1 line

svn --version

svn, version 1.6.2 (r37639)
compiled Jun 19 2009, 12:21:15

Copyright (C) 2000-2009 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
This product includes software developed by CollabNet (http://www.Collab.Net/).

The following repository access (RA) modules are available:

* ra_neon : Module for accessing a repository via WebDAV protocol using Neon.
- handles 'http' scheme
- handles 'https' scheme
* ra_svn : Module for accessing a repository using the svn network protocol.
- with Cyrus SASL authentication
- handles 'svn' scheme
* ra_local : Module for accessing a repository on local disk.
- handles 'file' scheme

and its installed in

Quoted 1 line

which svn

/usr/bin/svn

Quoted 8 lines
Quoted 1 line

echo $PERL5LIB

<empty>

so looks like plain vanilla installation/build.

Is "perl bindings" the "subversion-perl" package (which likes to downgrade my svn upon installing in yast)?

Yes, subversion-perl are the perl bindings, and if your distro has mismatching versions of subversion and subversion perl, then they have a problem, sorry :|

Quoted 21 lines

Is it a part of SVN (couln't find it there) or of perl?

Quoted 1 line

perl --version says:

This is perl, v5.10.0 built for i586-linux-thread-multi

Copyright 1987-2007, Larry Wall
...

Quoted 11 lines
Quoted 11 lines

Thus, being no admin and no perl guy, I am stuck now and am asking here for some kind help, being very well aware that it's not a git issue but just about getting some prerequisite for git.

Where do I have to go to get the svn+perl stuff? Couldn't locate anything like that in subversion.tigris.org, so that I am stuck and need some hints on how to proceed.

Many thanks,

Johann

#4 lore raw
Quoted 59 lines · Michael J Gruber

Georg-Johann Lay venit, vidit, dixit 26.09.2011 15:41:

Quoted 58 lines
Quoted 18 lines · Michael J Gruber

Georg-Johann Lay venit, vidit, dixit 26.09.2011 13:48:

Quoted 17 lines

Hi, I just downloaded git and built from source, version is

git version 1.7.6.4

I am particularly interested in git-svn, but running it I get complaints

Initialized empty Git repository in /local/Downloads/v4.5.x/.git/ Can't locate SVN/Core.pm in @INC (@INC contains:
/usr/local/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/local/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/5.10.0/i586-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl .) at /usr/local/libexec/git-core/git-svn line 42

Quoted 5 lines
Quoted 2 lines

I found out that a module like subversion-perl is missing, but installing it via OpenSuse 1.11 would downgrade my SVN installation, so I skipped that.

So, where did you get your svn from? If you compiled it yourself, you should rebuild it with the perl bindings. Make sure you note where you install this to - you may have to adjust your PERL5LIB.

Hi Michael

svn identifies itself as

Quoted 1 line

svn --version

svn, version 1.6.2 (r37639)
compiled Jun 19 2009, 12:21:15

Copyright (C) 2000-2009 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
This product includes software developed by CollabNet (http://www.Collab.Net/).

The following repository access (RA) modules are available:

* ra_neon : Module for accessing a repository via WebDAV protocol using Neon.
- handles 'http' scheme
- handles 'https' scheme
* ra_svn : Module for accessing a repository using the svn network protocol.
- with Cyrus SASL authentication
- handles 'svn' scheme
* ra_local : Module for accessing a repository on local disk.
- handles 'file' scheme

and its installed in

Quoted 1 line

which svn

/usr/bin/svn

Quoted 1 line

echo $PERL5LIB

<empty>

Quoted 9 lines
Quoted 4 lines

so looks like plain vanilla installation/build.

Is "perl bindings" the "subversion-perl" package (which likes to downgrade my svn upon installing in yast)?

Yes, subversion-perl are the perl bindings, and if your distro has mismatching versions of subversion and subversion perl, then they have a problem, sorry :|

Quoted 1 line

Is it a part of SVN (couln't find it there) or of perl?

I could find
http://svn.apache.org/repos/asf/subversion/trunk/subversion/bindings/swig/INSTALL
and hope that explains the trick so that a noob like me doesn't get lost...

Many, many thanks for your help Michael!

Johann

#5 lore raw

Georg-Johann Lay venit, vidit, dixit 26.09.2011 16:51:

Quoted 68 lines
Quoted 67 lines · Michael J Gruber

Georg-Johann Lay venit, vidit, dixit 26.09.2011 15:41:

Quoted 54 lines
Quoted 18 lines · Michael J Gruber

Georg-Johann Lay venit, vidit, dixit 26.09.2011 13:48:

Quoted 17 lines

Hi, I just downloaded git and built from source, version is

git version 1.7.6.4

I am particularly interested in git-svn, but running it I get complaints

Initialized empty Git repository in /local/Downloads/v4.5.x/.git/ Can't locate SVN/Core.pm in @INC (@INC contains:
/usr/local/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/local/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/5.10.0/i586-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl .) at /usr/local/libexec/git-core/git-svn line 42

Quoted 5 lines
Quoted 2 lines

I found out that a module like subversion-perl is missing, but installing it via OpenSuse 1.11 would downgrade my SVN installation, so I skipped that.

So, where did you get your svn from? If you compiled it yourself, you should rebuild it with the perl bindings. Make sure you note where you install this to - you may have to adjust your PERL5LIB.

Hi Michael

svn identifies itself as

Quoted 1 line

svn --version

svn, version 1.6.2 (r37639)
compiled Jun 19 2009, 12:21:15

Copyright (C) 2000-2009 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
This product includes software developed by CollabNet (http://www.Collab.Net/).

The following repository access (RA) modules are available:

* ra_neon : Module for accessing a repository via WebDAV protocol using Neon.
- handles 'http' scheme
- handles 'https' scheme
* ra_svn : Module for accessing a repository using the svn network protocol.
- with Cyrus SASL authentication
- handles 'svn' scheme
* ra_local : Module for accessing a repository on local disk.
- handles 'file' scheme

and its installed in

Quoted 1 line

which svn

/usr/bin/svn

Quoted 8 lines
Quoted 1 line

echo $PERL5LIB

<empty>

so looks like plain vanilla installation/build.

Is "perl bindings" the "subversion-perl" package (which likes to downgrade my svn upon installing in yast)?

Yes, subversion-perl are the perl bindings, and if your distro has mismatching versions of subversion and subversion perl, then they have a problem, sorry :|

Quoted 6 lines
Quoted 1 line
Quoted 1 line

Is it a part of SVN (couln't find it there) or of perl?

I could find
http://svn.apache.org/repos/asf/subversion/trunk/subversion/bindings/swig/INSTALL
and hope that explains the trick so that a noob like me doesn't get lost...

That requires you to build swig and subversion, which I thought you wanted to avoid. But if that does not scare you - by all means go ahead :)

Quoted 3 lines

Many, many thanks for your help Michael!

Johann

Cheers,
Michael

#8 lore raw
Quoted 7 lines · Christian Couder

Hi,

Quoted 3 lines · Georg-Johann Lay

Where do I have to go to get the svn+perl stuff? Couldn't locate anything like that in subversion.tigris.org, so that I am stuck and need some hints on how to proceed.

Quoted 7 lines

Perhaps you can try to install this module from CPAN:

http://search.cpan.org/~mschwern/Alien-SVN-v1.6.12.1/

or from it's github repo:

https://github.com/schwern/alien-svn

Hi Christian,

thanks for that hint.

After getting that piece of software, running ./Build.PL and ./Build I just don't know what to do next. The README doesn't say anything about how to use the built modules or how to do an install.

As git-svn complains

...Can't locate SVN/Core.pm in @INC (@INC contains: ...

and

schwern-alien-svn-9298884>find . -name 'Core.pm'
./src/subversion/subversion/bindings/swig/perl/native/Core.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Core.pm

the question is how to do the final trick of telling git how to use Core.pm (and which of the two?) and do the connexion between git and alien-svn.

Sorry for the noob questions, never used perl or git before...

Johann

Quoted 2 lines

Regards,
Christian.

p.s. is it possible not to open quote e-mail addresses in mailing lists?

#9 lore raw
Quoted 15 lines · Georg-Johann Lay
Quoted 6 lines · Christian Couder
Quoted 3 lines · Georg-Johann Lay

Where do I have to go to get the svn+perl stuff? Couldn't locate anything like that in subversion.tigris.org, so that I am stuck and need some hints on how to proceed.

Quoted 7 lines

Perhaps you can try to install this module from CPAN:

http://search.cpan.org/~mschwern/Alien-SVN-v1.6.12.1/

or from it's github repo:

https://github.com/schwern/alien-svn

Quoted 7 lines

Hi Christian,

thanks for that hint.

After getting that piece of software, running ./Build.PL and ./Build I just don't know what to do next. The README doesn't say anything about how to use the built modules or how to do an install.

If you don't have admin privileges on the box, the best solution would be to use local::lib[1] to install Perl modules in your home directory for you (#perl IRC channel on FreeNode, or perlmonks are really helpful).

I really recommend it, together with cpanm[2] (which can configure local::lib for you, via --local-lib option), though the latter is not necessary.

[1]: http://search.cpan.org/~apeiron/local-lib-1.008004/lib/local/lib.pm
[2]: http://search.cpan.org/~miyagawa/App-cpanminus-1.4008/bin/cpanm

If you have admin privileges, I think the best solution would be either find repository which has subversion-perl that matches your version of Subversion, or compile subversion-perl from a source package... though this might be more difficult, it has advantage of being in package management.

Quoted 6 lines

As git-svn complains

...Can't locate SVN/Core.pm in @INC (@INC contains: ...

and

Quoted 8 lines

schwern-alien-svn-9298884>find . -name 'Core.pm'
./src/subversion/subversion/bindings/swig/perl/native/Core.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Core.pm

the question is how to do the final trick of telling git how to use Core.pm (and which of the two?) and do the connexion between git and alien-svn.

Sorry for the noob questions, never used perl or git before...

You have to install subversion-perl somewhere, not only build it. Though you could fiddle with PERL5LIB (which is PATH-like environmtne variable to specify where to search for Perl modules) to make Perl find your built but not installed Alien::SVN.

HTH

Signature · 1 line
Jakub Narębski
#6 lore raw
In reply to Georg-Johann Lay
Quoted 6 lines · Georg-Johann Lay

svn identifies itself as

Quoted 1 line

svn --version

svn, version 1.6.2 (r37639)
compiled Jun 19 2009, 12:21:15

openSUSE 11.1 contained subversion 1.5.2 (and 1.5.7 as an update), so this is definitely not vanilla.

Andreas.

Signature · 3 lines
Andreas Schwab, [email protected]
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."
#10 lore raw
In reply to Jakub Narebski
Quoted 50 lines · Jakub Narebski
Quoted 12 lines · Georg-Johann Lay
Quoted 11 lines · Christian Couder
Quoted 3 lines · Georg-Johann Lay

Where do I have to go to get the svn+perl stuff? Couldn't locate anything like that in subversion.tigris.org, so that I am stuck and need some hints on how to proceed.

Perhaps you can try to install this module from CPAN:

http://search.cpan.org/~mschwern/Alien-SVN-v1.6.12.1/

or from it's github repo:

Quoted 8 lines
Quoted 1 line

https://github.com/schwern/alien-svn

Hi Christian,

thanks for that hint.

After getting that piece of software, running ./Build.PL and ./Build I just don't know what to do next. The README doesn't say anything about how to use the built modules or how to do an install.

If you don't have admin privileges on the box, the best solution would be to use local::lib[1] to install Perl modules in your home directory for you (#perl IRC channel on FreeNode, or perlmonks are really helpful).

I really recommend it, together with cpanm[2] (which can configure local::lib for you, via --local-lib option), though the latter is not necessary.

[1]: http://search.cpan.org/~apeiron/local-lib-1.008004/lib/local/lib.pm
[2]: http://search.cpan.org/~miyagawa/App-cpanminus-1.4008/bin/cpanm

If you have admin privileges, I think the best solution would be either find repository which has subversion-perl that matches your version of Subversion, or compile subversion-perl from a source package... though this might be more difficult, it has advantage of being in package management.

Quoted 10 lines

As git-svn complains

...Can't locate SVN/Core.pm in @INC (@INC contains: ...

and

schwern-alien-svn-9298884>find . -name 'Core.pm'
./src/subversion/subversion/bindings/swig/perl/native/Core.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Core.pm

Quoted 6 lines
Quoted 4 lines

the question is how to do the final trick of telling git how to use Core.pm (and which of the two?) and do the connexion between git and alien-svn.

Sorry for the noob questions, never used perl or git before...

You have to install subversion-perl somewhere, not only build it.

Unfortunately, that package comes without hints on doing that.

As far as I understand, alien-svn comes with SVN sources which it uses for its own perl packages to provide svn stuff to perl, but don't install/build new svn version.

Quoted 3 lines

Though you could fiddle with PERL5LIB (which is PATH-like environmtne

find . -name '*.pm'

./src/subversion/subversion/bindings/swig/perl/native/Delta.pm ./src/subversion/subversion/bindings/swig/perl/native/Base.pm ./src/subversion/subversion/bindings/swig/perl/native/Ra.pm ./src/subversion/subversion/bindings/swig/perl/native/Repos.pm ./src/subversion/subversion/bindings/swig/perl/native/Core.pm ./src/subversion/subversion/bindings/swig/perl/native/Wc.pm ./src/subversion/subversion/bindings/swig/perl/native/Client.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Delta.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Base.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Ra.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Repos.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Core.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Wc.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Client.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Fs.pm ./src/subversion/subversion/bindings/swig/perl/native/Fs.pm ./inc/My/SVN/Builder.pm
./lib/Alien/SVN.pm
./blib/lib/Alien/SVN.pm

and so I added the paths to PERL5LIB:
export PERL5LIB=\
<alien-svn>/blib/lib/Alien\
:<alien-svn>/src/subversion/subversion/bindings/swig/perl/native/blib/lib\
:<alien-svn>/src/subversion/subversion/bindings/swig/perl/native
where "." is the source directory of alien-svn and where the ./Build.PL and ./Build scripts ran.

Running git-svn with that complains

Can't locate loadable object for module SVN::_Core in @INC (@INC contains:
...
<alien-svn>/blib/lib/Alien <alien-svn>/src/subversion/subversion/bindings/swig/perl/native/blib/lib <alien-svn>/src/subversion/subversion/bindings/swig/perl/native
...) at <alien-svn>/src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Base.pm line 59
BEGIN failed--compilation aborted at <alien-svn>/src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Core.pm line 5.
Compilation failed in require at /usr/local/libexec/git-core/git-svn line 42.

git-svn:42 is mumbling about some problems:

sub _req_svn {
require SVN::Core; # use()-ing this causes segfaults for me... *shrug*

Or is there needed even more like a _Core.pm? alien-svn should build it, doesn't it?

Quoted 2 lines

variable to specify where to search for Perl modules) to make Perl find your built but not installed Alien::SVN.

How do I install that?

Sorry for all these question. Admin left the company some weeks ago and I am struggling to get this to work somehow between my everyday work...

#11 lore raw
Quoted 56 lines · Georg-Johann Lay
Quoted 55 lines · Jakub Narebski
Quoted 13 lines · Georg-Johann Lay
Quoted 12 lines · Christian Couder
Quoted 3 lines · Georg-Johann Lay

Where do I have to go to get the svn+perl stuff? Couldn't locate anything like that in subversion.tigris.org, so that I am stuck and need some hints on how to proceed.

Perhaps you can try to install this module from CPAN:

http://search.cpan.org/~mschwern/Alien-SVN-v1.6.12.1/

or from it's github repo:

Quoted 7 lines
Quoted 1 line

https://github.com/schwern/alien-svn

thanks for that hint.

After getting that piece of software, running ./Build.PL and ./Build I just don't know what to do next. The README doesn't say anything about how to use the built modules or how to do an install.

If you don't have admin privileges on the box, the best solution would be to use local::lib[1] to install Perl modules in your home directory for you (#perl IRC channel on FreeNode, or perlmonks are really helpful).

I really recommend it, together with cpanm[2] (which can configure local::lib for you, via --local-lib option), though the latter is not necessary.

[1]: http://search.cpan.org/~apeiron/local-lib-1.008004/lib/local/lib.pm
[2]: http://search.cpan.org/~miyagawa/App-cpanminus-1.4008/bin/cpanm

If you have admin privileges, I think the best solution would be either find repository which has subversion-perl that matches your version of Subversion, or compile subversion-perl from a source package... though this might be more difficult, it has advantage of being in package management.

Quoted 14 lines

As git-svn complains

...Can't locate SVN/Core.pm in @INC (@INC contains: ...

and

schwern-alien-svn-9298884>find . -name 'Core.pm'
./src/subversion/subversion/bindings/swig/perl/native/Core.pm ./src/subversion/subversion/bindings/swig/perl/native/blib/lib/SVN/Core.pm

the question is how to do the final trick of telling git how to use Core.pm (and which of the two?) and do the connexion between git and alien-svn.

Sorry for the noob questions, never used perl or git before...

Quoted 7 lines
Quoted 1 line

You have to install subversion-perl somewhere, not only build it.

Unfortunately, that package comes without hints on doing that.

As far as I understand, alien-svn comes with SVN sources which it uses for its own perl packages to provide svn stuff to perl, but don't install/build new svn version.

Step by step instruction.

1. Follow instructions on local::lib manpage
http://search.cpan.org/perldoc?local::lib

c.f. http://perl.jonallen.info/writing/articles/install-perl-modules-without-root

2. (Optional). Follow instructions on cpanm manpage, e.g. http://cpanmin.us
or http://search.cpan.org/perldoc?cpanm

3. Install Alien::SVN from CPAN using 'cpan' client or 'cpanm', e.g.

   $ cpanm Alien::SVN

Now you are able to install Perl modules in your home directory.

Signature · 2 lines
Jakub Narebski
Poland
#12 lore raw
Quoted 12 lines · Jakub Narebski
Quoted 3 lines · Georg-Johann Lay

As far as I understand, alien-svn comes with SVN sources which it uses for its own perl packages to provide svn stuff to perl, but don't install/build new svn version.

Step by step instruction.

1. Follow instructions on local::lib manpage
http://search.cpan.org/perldoc?local::lib

c.f. http://perl.jonallen.info/writing/articles/install-perl-modules-without-root

Quoted 8 lines

2. (Optional). Follow instructions on cpanm manpage, e.g. http://cpanmin.us
or http://search.cpan.org/perldoc?cpanm

3. Install Alien::SVN from CPAN using 'cpan' client or 'cpanm', e.g.

   $ cpanm Alien::SVN

Now you are able to install Perl modules in your home directory.

Thank you very much, I never would have found the way through all that jungle alone!

After steps 1-3 succeeded (as far as I can tell) I can run git svn (but not git-svn) now.

With an SVN repo I can do

$ svn list http://repo/path

archive/
branches/
tags/
trunk/

and

$ svn checkout http://repo/path

but git svn complains:

$ git svn clone -s --username=georg http://repo/path

Initialized empty Git repository in /local/georg/path/.git/
Bad URL passed to RA layer: Unrecognized URL scheme for 'http://repo/path' at /usr/local/libexec/git-core/git-svn line 1941

Does git svn not support http?

Quoted 1 line

From what I read in git svn --help this should suffice to checkout from SVN and

http is mentioned explicitly in an example.

So is my git-svn still broken/not functional or am I missing something from the docs?

Johann

#13 lore raw

Hi Johann,
Were you able to get this working? I'm also getting the "Bad URL passed to RA
layer: Unrecognized URL scheme" error when trying to run "git svn clone".