"modprobe snd_hda_intel" crashes on my hardware
sound/pci/hda/patch_via.c +47 -1
@@ -891,6 +891,49 @@ static int via_auto_init(struct hda_codereturn 0 ; } +static int ezono_vt1708_init (struct hda_codec *codec) +{ +/* THis is added because Ezono sound card doesn't support auto detection */ + +/* Port_A PW0 */ +snd_hda_codec_write (codec,0x1c ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 ,0x00 ); +snd_hda_codec_write (codec,0x1c ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xf0 ); +snd_hda_codec_write (codec,0x1c ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0x00 ); +snd_hda_codec_write (codec,0x1c ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x00 ); + +/* Port_B Pw1 */ +snd_hda_codec_write (codec,0x1d ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 ,0x40 ); +snd_hda_codec_write (codec,0x1d ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xf0 ); +snd_hda_codec_write (codec,0x1d ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0xa0 ); +snd_hda_codec_write (codec,0x1d ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x00 ); + +/* Port_D PW3 */ +snd_hda_codec_write (codec,0x1f ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 ,0x10 ); +snd_hda_codec_write (codec,0x1f ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xf0 ); +snd_hda_codec_write (codec,0x1f ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0x00 ); +snd_hda_codec_write (codec,0x1f ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x01 ); + +/* Port_E PW4 */ +snd_hda_codec_write (codec,0x20 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 ,0x00 ); +snd_hda_codec_write (codec,0x20 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xf0 ); +snd_hda_codec_write (codec,0x20 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0x20 ); +snd_hda_codec_write (codec,0x20 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x00 ); + +/* Port_G PW6 */ +snd_hda_codec_write (codec,0x22 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 ,0x02 ); +snd_hda_codec_write (codec,0x22 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xf0 ); +snd_hda_codec_write (codec,0x22 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0x00 ); +snd_hda_codec_write (codec,0x22 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x00 ); + +/* Port_H PW7 */ +snd_hda_codec_write (codec,0x23 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 ,0x04 ); +snd_hda_codec_write (codec,0x23 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xf0 ); +snd_hda_codec_write (codec,0x23 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0x00 ); +snd_hda_codec_write (codec,0x23 ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x00 ); + +return 0 ; +} +static int patch_vt1708 (struct hda_codec *codec) {struct via_spec *spec;
@@ -902,7 +945,10 @@ static int patch_vt1708(struct hda_codecreturn -ENOMEM ; codec->spec = spec; - + +/* Init Ezono Sound card */ +ezono_vt1708_init (codec); +/* automatic parse from the BIOS config */ err =vt1708_parse_auto_config (codec);if (err <0 ) {
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Mon Aug 22 22:33:45 UTC 2011
!!Linux Distribution
!!------------------
Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock)
!!DMI Information
!!---------------
Manufacturer:
Product Name:
Product Version:
!!Kernel Information
!!------------------
Kernel release: 2.6.40.3-0.119.delos.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: No
!!ALSA Version
!!------------
Driver version: 1.0.24
Library version:
Utilities version: 1.0.24.1
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfea38000 irq 10
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: VIA VT1708
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11061708
Subsystem Id: 0xffffffff
Revision Id: 0x100700
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x10 [Audio Output] wcaps 0x411: Stereo
Device: name="VT1708 Analog", type="Audio", device=0
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x13 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x14 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x5]: PCM AC3
Node 0x15 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="VT1708 Analog", type="Audio", device=0
Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1
Amp-In vals: [0x0f 0x0f]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x440]: 48000 192000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1
Power: setting=D0, actual=D0
Connection: 1
0x18Node 0x16 [Audio Input] wcaps 0x100311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital: Validity
Digital category: 0x0
PCM:
rates [0x1f0]: 32000 44100 48000 88200 96000
bits [0xa]: 16 24
formats [0x5]: PCM AC3
Connection: 1
0x26
Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Master Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Master Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x06, mute=1
Amp-In vals: [0x18 0x18] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x10 0x24 0x1d 0x1e 0x21 0x13
Node 0x18 [Audio Selector] wcaps 0x300101: Stereo
Control: name="Input Source", index=0, device=0
Connection: 5
0x17* 0x24 0x1d 0x1e 0x21Node 0x19 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x00 0x00]
Connection: 1
0x11
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x00 0x00]
Connection: 1
0x12
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x00 0x00]
Connection: 1
0x13
Node 0x1c [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x0000f000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Other DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x00:
Connection: 1
0x19
Node 0x1d [Pin Complex] wcaps 0x400101: Stereo
Control: name="Smart 5.1", index=0, device=0
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0x00a0f040: [Jack] Mic at Ext N/A
Conn = Unknown, Color = Other
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x41: OUT VREF_50
Connection: 1
0x1a
Node 0x1e [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xfffff7ff: [Both] Other at Oth UNKNOWN
Conn = Other, Color = Other DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x19
Node 0x1f [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1
Amp-Out vals: [0x15 0x15]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x0100f010: [Jack] Line Out at Ext Rear
Conn = Unknown, Color = Other
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Connection: 1
0x17
Node 0x20 [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1
Amp-Out vals: [0x1b 0x1b]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x0020f000: [Jack] HP Out at Ext N/A
Conn = Unknown, Color = Other
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x17Node 0x21 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xffffffff: [Both] Other at Oth UNKNOWN
Conn = Other, Color = Other DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x1b
Node 0x22 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x0000f002: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Other DefAssociation = 0x0, Sequence = 0x2
Pin-ctls: 0x00:
Connection: 1
0x1a
Node 0x23 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x0000f004: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Other DefAssociation = 0x0, Sequence = 0x4
Pin-ctls: 0x00:
Connection: 1
0x1b
Node 0x24 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0xfffbffff: [Both] Other at Oth UNKNOWN
Conn = Comb, Color = Other
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0xffffffff: [Both] Other at Oth UNKNOWN
Conn = Other, Color = Other DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x14
Node 0x26 [Pin Complex] wcaps 0x400201: Stereo Digital
Pincap 0x00010030: IN OUT EAPD
EAPD 0x2: EAPD
Pin Default 0xffffffff: [Both] Other at Oth UNKNOWN
Conn = Other, Color = Other DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Node 0x27 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1
Amp-In vals: [0x0f 0x0f]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x440]: 48000 192000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1
Power: setting=D0, actual=D0
Connection: 1
0x21--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---- 1 root cyclades 116, 5 Aug 23 00:33 /dev/snd/controlC0 crw-rw---- 1 root cyclades 116, 4 Aug 23 00:33 /dev/snd/hwC0D2 crw-rw---- 1 root cyclades 116, 3 Aug 23 00:33 /dev/snd/pcmC0D0c crw-rw---- 1 root cyclades 116, 2 Aug 23 00:33 /dev/snd/pcmC0D0p crw-rw---- 1 root cyclades 116, 1 Aug 23 00:33 /dev/snd/seq
crw-rw---- 1 root cyclades 116, 33 Aug 23 00:33 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Aug 23 00:33 .
drwxr-xr-x 3 root root 180 Aug 23 00:33 ..
lrwxrwxrwx 1 root root 12 Aug 23 00:33 pci-0000:00:1b.0 -> ../controlC0
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
#
# Place your global alsa-lib configuration here... #
@hooks [
{
func load
files [
"/etc/alsa/pulse-default.conf"
]
errors false
}]
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708 Analog [VT1708 Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708 Analog [VT1708 Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xfea38000 irq 10'
Mixer name : 'VIA VT1708'
Components : 'HDA:11061708,ffffffff,00100700'
Controls : 15
Simple ctrls : 9
Simple mixer control 'Master Front',0
Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 24 [77%] [1.75dB] [on] Front Right: Playback 24 [77%] [1.75dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 27
Mono:
Front Left: Playback 27 [100%] [0.00dB] [on] Front Right: Playback 27 [100%] [0.00dB] [on]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 27
Mono:
Front Left: Playback 21 [78%] [-10.50dB] [on] Front Right: Playback 21 [78%] [-10.50dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-40.25dB] [off] Front Right: Playback 0 [0%] [-40.25dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right
Limits: Capture 0 - 20
Front Left: Capture 15 [75%] [26.25dB] [on] Front Right: Capture 15 [75%] [26.25dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right
Limits: Capture 0 - 20
Front Left: Capture 15 [75%] [26.25dB] [on] Front Right: Capture 15 [75%] [26.25dB] [on]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Stereo Mixer' 'Mic'
Item0: 'Stereo Mixer'
Simple mixer control 'Jack Detect',0
Capabilities: pswitch pswitch-joined penum Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Smart 5.1',0
Capabilities: pswitch pswitch-joined penum Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
iface MIXER
name 'Jack Detect'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'Master Front Playback Volume'
value.0 24
value.1 24
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -4025
dbmax 1400
dbvalue.0 175
dbvalue.1 175
}
}
control.3 {
iface MIXER
name 'Master Front Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.4 {
iface MIXER
name 'Front Playback Volume'
value.0 21
value.1 21
comment {
access 'read write'
type INTEGER
count 2
range '0 - 27'
dbmin -4725
dbmax 0
dbvalue.0 -1050
dbvalue.1 -1050
}
}
control.5 {
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'Headphone Playback Volume'
value.0 27
value.1 27
comment {
access 'read write'
type INTEGER
count 2
range '0 - 27'
dbmin -4725
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.7 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -4025
dbmax 1400
dbvalue.0 -4025
dbvalue.1 -4025
}
}
control.9 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Smart 5.1'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.11 {
iface MIXER
name 'Capture Volume'
value.0 15
value.1 15
comment {
access 'read write'
type INTEGER
count 2
range '0 - 20'
dbmin 0
dbmax 3500
dbvalue.0 2625
dbvalue.1 2625
}
}
control.12 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.13 {
iface MIXER
name 'Capture Volume'
index 1
value.0 15
value.1 15
comment {
access 'read write'
type INTEGER
count 2
range '0 - 20'
dbmin 0
dbmax 3500
dbvalue.0 2625
dbvalue.1 2625
}
}
control.14 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.15 {
iface MIXER
name 'Input Source'
value 'Stereo Mixer'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Stereo Mixer'
item.1 Mic
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Modulesnd_hda_codec_viasnd_hda_intelsnd_hda_codecsnd_hwdepsnd_seqsnd_seq_devicesnd_pcmsnd_timer
snd
soundcoresnd_page_alloc
ipv6
fakephp
cgosdrv
joydev
mcs7830
usbnet
mii
usbtouchscreeniTCO_wdtiTCO_vendor_supporti2c_i801serio_raw
pciehp
xfs
i915drm_kms_helper
drmi2c_algo_biti2c_core
video
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D2/init_pin_configs:0x1c 0x0000f0000x1d 0x00a0f0400x1e 0xfffff7ff0x1f 0x0100f0100x20 0x0020f0000x21 0xffffffff0x22 0x0000f0020x23 0x0000f0040x24 0xfffbffff0x25 0xffffffff0x26 0xffffffff
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
!!ALSA/HDA dmesg
!!------------------
[ 43.978457] XFS (sda2): Ending clean mount [ 153.600185] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 153.600227] HDA Intel 0000:00:1b.0: setting latency timer to 64
This looks like a patch, not like a crash report.
Please check linux/Documentation/SubmittingPatches.
Quoted 1 line · Abdelghani Ouchabane
+ /* THis is added because Ezono sound card doesn't support auto detection */
"This"
_All_ VT1708 chips support autodetection; the registers just have to be initialized correctly by the BIOS.
sound/pci/hda/patch_via.c static int via_auto_init(struct hda_code · line 902
Quoted 6 lines
sound/pci/hda/patch_via.c +5
-0+/* Port_A PW0 */ +snd_hda_codec_write (codec,0x1c ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 ,0x00 ); +snd_hda_codec_write (codec,0x1c ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xf0 ); +snd_hda_codec_write (codec,0x1c ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0x00 ); +snd_hda_codec_write (codec,0x1c ,0 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x00 );
A table of initialization values that gets written in a loop would look less ugly.
sound/pci/hda/patch_via.c static int patch_vt1708(struct hda_codec · line 951
Quoted 12 lines
static int
patch_vt1708(struct hda_codec *codec)
{sound/pci/hda/patch_via.c +4
-1struct via_spec *spec;@@ -902,7 +945,10 @@ static int patch_vt1708(struct hda_codecreturn -ENOMEM ; codec->spec = spec; - + +/* Init Ezono Sound card */ +ezono_vt1708_init (codec); +
Please don't add whitespace to empty lines.
This initialization gets applied to _all_ VT1708 chips; thus it will break all non-Ezono machines.
The driver has to check whether it is running on this particular model of an Ezono computer. The correct way to do this is to check the PCI IDs:
Quoted 3 lines
00:1b.0 0403: 8086:27d8
...
Subsystem Id:0xffffffff
Oh well, somebody forgot to initialize them. Probably the same BIOS programmer that forgot to initialize the VT1708 registers.
Another way would be to check the DMI strings.
Quoted 3 lines
Manufacturer:
Product Name:
Product Version:
Or not. Who wrote that BIOS? Somebody whose brain was damaged by too much ultrasound?
Anyway, you could just override the pin configs with a HDA patch file. Ensure that your kernel is compiled with CONFIG_SND_HDA_PATCH_LOADER; then create a file /lib/firmware/forgotten-ezono-hda-settings with the following contents:
[codec]0x11061708 0xffffffff 2
[pincfg]0x1c 0x0000f0000x1d 0x00a0f0400x1f 0x0100f0100x20 0x0020f0000x22 0x0000f0020x23 0x0000f004
Then load the snd-hda-intel driver with the parameter "patch=forgotten-ezono-hda-settings", either by adding that parameter to the modprobe command line, or by putting the line
options snd-hda-intel patch=forgotten-ezono-hda-settings
into a .conf file in /etc/modprobe.d/.
Regards,
Clemens
Quoted 3 lines · Clemens Ladisch
Or not. Who wrote that BIOS? Somebody whose brain was damaged by too much ultrasound?
Not me ;-) ,
Quoted 20 lines
Anyway, you could just override the pin configs with a HDA patch file. Ensure that your kernel is compiled with
CONFIG_SND_HDA_PATCH_LOADER; then create a file/lib/firmware/forgotten-ezono-hda-settingswith the following contents:[codec]
0x110617080xffffffff2
[pincfg]0x1c0x0000f0000x1d0x00a0f0400x1f0x0100f0100x200x0020f0000x220x0000f0020x230x0000f004Then load the snd-hda-intel driver with the parameter "patch=forgotten-ezono-hda-settings", either by adding that parameter to the modprobe command line, or by putting the line
Quoted 8 lines
options snd-hda-intel patch=forgotten-ezono-hda-settings
into a .conf file in
/etc/modprobe.d/.Regards,
Clemens
Thanks a lot Clemens for your great feedback, I will test your solution and let you know.
My best regards,
Ghani
Quoted 6 lines
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
2011/9/27 Clemens Ladisch <[email protected]>:
Quoted 2 lines
This looks like a patch, not like a crash report.
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5451
[ 95.366164] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 95.366209] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 95.398391] hda_codec: Cannot set up configuration from BIOS. Using genenic mode... [ 95.398470] BUG: unable to handle kernel NULL pointer dereference at (null) [ 95.398477] IP: [<f83740ac>] via_build_pcms+0x60/0xdc [snd_hda_codec_via] [ 95.398494] *pde = 3173f067 *pte = 00000000 [ 95.398501] Oops: 0000 [#1] PREEMPT [ 95.398509] Modules linked in: snd_hda_codec_via snd_hda_intel(+)
snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc ipv6 fakephp cgosdrv(P) joydev mcs7830 usbnet mii usbtouchscreen iTCO_wdt i2c_i801 pciehp iTCO_vendor_support serio_raw xfs i915 drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: scsi_wait_scan]
[ 95.398558] [ 95.398564] Pid: 4208, comm: modprobe Tainted: P 2.6.40.3-0.119.delos.i686 #1 [ 95.398572] EIP: 0060:[<f83740ac>] EFLAGS: 00010246 CPU: 0 [ 95.398581] EIP is at via_build_pcms+0x60/0xdc [snd_hda_codec_via] [ 95.398587] EAX: f174f000 EBX: 00000000 ECX: 00000000 EDX: dd58f400 [ 95.398592] ESI: f837c760 EDI: f174f120 EBP: f17afd28 ESP: f17afd20 [ 95.398597] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 95.398603] Process modprobe (pid: 4208, ti=f17ae000 task=f0e5be30 task.ti=f17ae000) [ 95.398607] Stack: [ 95.398610] dd58f400 00000001 f17afd68 f81ef28a 00000050 f81f6511 f16aa960 f16aa968 [ 95.398622] 00000001 11061708 2d646e73 2d616468 65646f63 64692d63 3031313a dd58f400 [ 95.398634] f578642c 00000001 f17afd78 f81f5aaf f171da00 f5786424 f17afde4 f816e6fd [ 95.398645] Call Trace: [ 95.398665] [<f81ef28a>] snd_hda_codec_build_pcms+0x25/0x230
[snd_hda_codec]
At Tue, 27 Sep 2011 08:41:20 +0200,
sound/pci/hda/patch_via.c
Quoted 4 lines · Abdelghani Ouchabane
diff -auNrp
kernel-2.6.26.orig/sound/pci/hda/patch_via.ckernel-2.6.26.new/sound/pci/hda/patch_via.csound/pci/hda/patch_via.c +0
-0
...
Does the problem occur with 3.0 or 3.1-rc kernel? (Alternatively you can try alsa-driver-snapshot tarball.)
If yes, load the driver with probe_only=1 option, run alsa-info.sh with --no-upload option, and attach the output.
thanks,
Takashi
At Wed, 28 Sep 2011 08:24:43 +0200,
Quoted 3 lines · Abdelghani Ouchabane
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html>
Please stop using HTML mail.
Takashi
Quoted 16 lines
Anyway, you could just override the pin configs with a HDA patch file. Ensure that your kernel is compiled with
CONFIG_SND_HDA_PATCH_LOADER; then create a file/lib/firmware/forgotten-ezono-hda-settingswith the following contents:[codec]
0x110617080xffffffff2
[pincfg]0x1c0x0000f0000x1d0x00a0f0400x1f0x0100f0100x200x0020f0000x220x0000f0020x230x0000f004
Quoted 8 lines
Then load the snd-hda-intel driver with the parameter "patch=forgotten-ezono-hda-settings", either by adding that parameter to the modprobe command line, or by putting the line
options snd-hda-intel patch=forgotten-ezono-hda-settings
into a .conf file in
/etc/modprobe.d/.
Hi Clemens ,
I tested your solution and here is the result:
1 - Keep my changes in sound/pci/hda/patch_via.c + your solution ----> The kernel did not crash + alsamixer showed the full interface, but the there was no sound, after rebooting the system, I had sound.
2 - Only your solution ----> The kernel crashed ( always ).
Maybe I am still missing some more settings in/lib/firmware/forgotten-ezono-hda-settings?
What do you think Clemens?
Am Mittwoch, den 28.09.2011, 11:07 +0200 schrieb Takashi Iwai:
Quoted 7 lines
At Wed, 28 Sep 2011 08:24:43 +0200,
Quoted 3 lines · Abdelghani Ouchabane
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html>
Please stop using HTML mail.
I did get plain text messages
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
which are/were all but one empty though.
Thanks,
Paul
Quoted 11 lines · Takashi Iwai
At Tue, 27 Sep 2011 08:41:20 +0200,
sound/pci/hda/patch_via.c
Quoted 4 lines · Abdelghani Ouchabane
diff -auNrp
kernel-2.6.26.orig/sound/pci/hda/patch_via.ckernel-2.6.26.new/sound/pci/hda/patch_via.csound/pci/hda/patch_via.c +0
-0...
Does the problem occur with 3.0 or 3.1-rc kernel?
Hallo Takashi,
It occurs with Fedora 15 ( Kernel : 2.6.39 )
Quoted 5 lines
(Alternatively you can try alsa-driver-snapshot tarball.)
If yes, load the driver with probe_only=1 option, run
alsa-info.shwith --no-upload option, and attach the output.
I attached to you the following :
1 - The output of alsa-info.sh ( probe_only=1 + --no-upload + my
changes(ezonopatch) + alsa-driver 1.0.24 )
2 - The output of alsa-info.sh ( probe_only=1 + --no-upload +
alsa-driver-snapshot ( alsa-driver-1.0.24.72.g7c48f.1314.geb1d0)
3 - With alsa-driver-1.0.24.72.g7c48f.1314.geb1d0 : modprobesnd_hda_intel : The system did not crash but alsamixer said that "This sound device does not have any controls"
Many thanks,
Ghani
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Sun Aug 21 22:14:37 UTC 2011
!!Linux Distribution
!!------------------
Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock)
!!DMI Information
!!---------------
Manufacturer:
Product Name:
Product Version:
!!Kernel Information
!!------------------
Kernel release: 2.6.40.3-0.119.delos.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: No
!!ALSA Version
!!------------
Driver version: 1.0.24
Library version:
Utilities version: 1.0.24.1
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfea38000 irq 10
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Not Set
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11061708
Subsystem Id: 0x7fafffdd
Revision Id: 0x100700
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x10 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x13 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x14 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x5]: PCM AC3Node 0x15 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x440]: 48000 192000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1
Power: setting=D0, actual=D0
Connection: 1
0x18Node 0x16 [Audio Input] wcaps 0x100311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital: Validity
Digital category: 0x0
PCM:
rates [0x1f0]: 32000 44100 48000 88200 96000
bits [0xa]: 16 24
formats [0x5]: PCM AC3
Connection: 1
0x26Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x06, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x10 0x24 0x1d 0x1e 0x21 0x13
Node 0x18 [Audio Selector] wcaps 0x300101: Stereo
Connection: 5
0x17* 0x24 0x1d 0x1e 0x21Node 0x19 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x11
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x12
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x13
Node 0x1c [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x7febf7ff: [N/A] Reserved at Oth UNKNOWN
Conn = Comb, Color = Other
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x19
Node 0x1d [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xffbff7ff: [Both] Telephony at Oth UNKNOWN
Conn = Other, Color = Other
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x1a
Node 0x1e [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xfffef6fd: [Both] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Other DefAssociation = 0xf, Sequence = 0xd
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x19
Node 0x1f [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0xfffdfffe: [Both] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Other
DefAssociation = 0xf, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x17
Node 0x20 [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0xffad7fff: [Both] Mic at Oth UNKNOWN
Conn = UNKNOWN, Color = Yellow
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x17
Node 0x21 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xffbe3eff: [Both] Telephony at Oth UNKNOWN
Conn = UNKNOWN, Color = Blue
DefAssociation = 0xf, Sequence = 0xf
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x1b
Node 0x22 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0xfe7fa67f: [Both] Modem Hand at Oth UNKNOWN
Conn = Other, Color = UNKNOWN
DefAssociation = 0x7, Sequence = 0xf
Pin-ctls: 0x00:
Connection: 1
0x1a
Node 0x23 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0xbffffff5: [Fixed] Other at Oth UNKNOWN
Conn = Other, Color = Other DefAssociation = 0xf, Sequence = 0x5
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x1b
Node 0x24 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0xdbfbbfff: [Both] Other at Int UNKNOWN
Conn = Comb, Color = UNKNOWN
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0xffefbf7d: [Both] Reserved at Oth UNKNOWN
Conn = Other, Color = UNKNOWN DefAssociation = 0x7, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x14
Node 0x26 [Pin Complex] wcaps 0x400201: Stereo Digital
Pincap 0x00010030: IN OUT EAPD
EAPD 0x0:
Pin Default 0xfffe3fef: [Both] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Blue
DefAssociation = 0xe, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x27 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x440]: 48000 192000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1
Power: setting=D0, actual=D0
Connection: 1
0x21--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---- 1 root cyclades 116, 3 Aug 22 00:12 /dev/snd/controlC0 crw-rw---- 1 root cyclades 116, 2 Aug 22 00:12 /dev/snd/hwC0D2 crw-rw---- 1 root cyclades 116, 1 Aug 22 00:12 /dev/snd/seq
crw-rw---- 1 root cyclades 116, 33 Aug 22 00:12 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Aug 22 00:12 .
drwxr-xr-x 3 root root 140 Aug 22 00:12 ..
lrwxrwxrwx 1 root root 12 Aug 22 00:12 pci-0000:00:1b.0 -> ../controlC0
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
#
# Place your global alsa-lib configuration here... #
@hooks [
{
func load
files [
"/etc/alsa/pulse-default.conf"
]
errors false
}]
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
ARECORD
**** List of CAPTURE Hardware Devices ****
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xfea38000 irq 10'
Mixer name : ''
Components : 'HDA:11061708,7fafffdd,00100700'
Controls : 0
Simple ctrls : 0
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control {
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Modulesnd_hda_intelsnd_hda_codecsnd_hwdepsnd_seqsnd_seq_devicesnd_pcmsnd_timer
snd
soundcoresnd_page_alloc
ipv6
fakephp
cgosdrv
joydev
mcs7830
usbnet
miiiTCO_wdtiTCO_vendor_supporti2c_i801
usbtouchscreenserio_raw
pciehp
xfs
i915drm_kms_helper
drmi2c_algo_biti2c_core
video
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D2/init_pin_configs:0x1c 0x7febf7ff0x1d 0xffbff7ff0x1e 0xfffef6fd0x1f 0xfffdfffe0x20 0xffad7fff0x21 0xffbe3eff0x22 0xfe7fa67f0x23 0xbffffff50x24 0xdbfbbfff0x25 0xffefbf7d0x26 0xfffe3fef
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
!!ALSA/HDA dmesg
!!------------------
[ 23.202024] eth0: no IPv6 routers present [ 297.563955] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 297.563995] HDA Intel 0000:00:1b.0: setting latency timer to 64
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Sun Aug 21 23:16:47 UTC 2011
!!Linux Distribution
!!------------------
Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock)
!!DMI Information
!!---------------
Manufacturer:
Product Name:
Product Version:
!!Kernel Information
!!------------------
Kernel release: 2.6.40.3-0.119.delos.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: No
!!ALSA Version
!!------------
Driver version: 1.0.24
Library version:
Utilities version: 1.0.24.1
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfea38000 irq 10
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
align_buffer_size : N bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Not Set
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11061708
Subsystem Id: 0x7faffedd
Revision Id: 0x100700
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x10 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x13 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x14 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x5]: PCM AC3Node 0x15 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x440]: 48000 192000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1
Power: setting=D0, actual=D0
Connection: 1
0x18Node 0x16 [Audio Input] wcaps 0x100311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital: Validity
Digital category: 0x0
PCM:
rates [0x1f0]: 32000 44100 48000 88200 96000
bits [0xa]: 16 24
formats [0x5]: PCM AC3
Connection: 1
0x26Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x06, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x10 0x24 0x1d 0x1e 0x21 0x13
Node 0x18 [Audio Selector] wcaps 0x300101: Stereo
Connection: 5
0x17* 0x24 0x1d 0x1e 0x21Node 0x19 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x11
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x12
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x13
Node 0x1c [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x7febf7ff: [N/A] Reserved at Oth UNKNOWN
Conn = Comb, Color = Other
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x19
Node 0x1d [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xfbbff7ff: [Both] Telephony at Oth UNKNOWN
Conn = Other, Color = Other
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x1a
Node 0x1e [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xfffef6fd: [Both] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Other DefAssociation = 0xf, Sequence = 0xd
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x19
Node 0x1f [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0xfffdfffe: [Both] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Other
DefAssociation = 0xf, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x17
Node 0x20 [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0xffa97fff: [Both] Mic at Oth UNKNOWN
Conn = XLR, Color = Yellow
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x17
Node 0x21 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xffb63eff: [Both] Telephony at Oth UNKNOWN
Conn = Digital, Color = Blue
DefAssociation = 0xf, Sequence = 0xf
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x1b
Node 0x22 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0xfe7fa67f: [Both] Modem Hand at Oth UNKNOWN
Conn = Other, Color = UNKNOWN
DefAssociation = 0x7, Sequence = 0xf
Pin-ctls: 0x00:
Connection: 1
0x1a
Node 0x23 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0xbffbfff5: [Fixed] Other at Oth UNKNOWN
Conn = Comb, Color = Other
DefAssociation = 0xf, Sequence = 0x5
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x1b
Node 0x24 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0xdbfbbfff: [Both] Other at Int UNKNOWN
Conn = Comb, Color = UNKNOWN
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0xffefbf7d: [Both] Reserved at Oth UNKNOWN
Conn = Other, Color = UNKNOWN DefAssociation = 0x7, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x14
Node 0x26 [Pin Complex] wcaps 0x400201: Stereo Digital
Pincap 0x00010030: IN OUT EAPD
EAPD 0x0:
Pin Default 0xfffe3fed: [Both] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Blue
DefAssociation = 0xe, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x27 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x440]: 48000 192000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1
Power: setting=D0, actual=D0
Connection: 1
0x21--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---- 1 root cyclades 116, 3 Aug 22 01:16 /dev/snd/controlC0 crw-rw---- 1 root cyclades 116, 2 Aug 22 01:16 /dev/snd/hwC0D2 crw-rw---- 1 root cyclades 116, 1 Aug 22 01:16 /dev/snd/seq
crw-rw---- 1 root cyclades 116, 33 Aug 22 01:16 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Aug 22 01:16 .
drwxr-xr-x 3 root root 140 Aug 22 01:16 ..
lrwxrwxrwx 1 root root 12 Aug 22 01:16 pci-0000:00:1b.0 -> ../controlC0
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
#
# Place your global alsa-lib configuration here... #
@hooks [
{
func load
files [
"/etc/alsa/pulse-default.conf"
]
errors false
}]
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
ARECORD
**** List of CAPTURE Hardware Devices ****
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xfea38000 irq 10'
Mixer name : ''
Components : 'HDA:11061708,7faffedd,00100700'
Controls : 0
Simple ctrls : 0
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control {
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Modulesnd_hda_intelsnd_hda_codecsnd_hwdepsnd_seqsnd_seq_devicesnd_pcmsnd_timer
snd
soundcoresnd_page_alloc
ipv6
fakephp
cgosdrv
joydev
mcs7830
usbnet
mii
usbtouchscreen
pciehpserio_rawiTCO_wdtiTCO_vendor_supporti2c_i801
xfs
i915drm_kms_helper
drmi2c_algo_biti2c_core
video
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D2/init_pin_configs:0x1c 0x7febf7ff0x1d 0xfbbff7ff0x1e 0xfffef6fd0x1f 0xfffdfffe0x20 0xffa97fff0x21 0xffb63eff0x22 0xfe7fa67f0x23 0xbffbfff50x24 0xdbfbbfff0x25 0xffefbf7d0x26 0xfffe3fed
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
!!ALSA/HDA dmesg
!!------------------
[ 22.306024] eth0: no IPv6 routers present [ 48.149978] snd_hda_intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 48.150180] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Quoted 4 lines
I attached to you the following :
2 - The output of alsa-info.sh ( probe_only=1 + --no-upload +alsa-driver-snapshot ( alsa-driver-1.0.24.72.g7c48f.1314.geb1d0)
Hi Takashi,
I have attached to you the right output of alsa-info.sh (
probe_only=1 + --no-upload + alsa-driver-snapshot ( alsa-driver-1.0.24.72.g7c48f.1314.geb1d0)
Cheers,
Ghani
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Sun Aug 21 23:46:19 UTC 2011
!!Linux Distribution
!!------------------
Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock)
!!DMI Information
!!---------------
Manufacturer:
Product Name:
Product Version:
!!Kernel Information
!!------------------
Kernel release: 2.6.40.3-0.119.delos.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: No
!!ALSA Version
!!------------
Driver version: 1.0.24.72.g7c48f.1314.geb1d0
Library version:
Utilities version: 1.0.24.1
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfea38000 irq 10
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
align_buffer_size : N bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Not Set
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11061708
Subsystem Id: 0x7fafffdd
Revision Id: 0x100700
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x10 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x13 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x1]: PCM Power states: D0 D1
Power: setting=D0, actual=D0
Node 0x14 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xa]: 16 24
formats [0x5]: PCM AC3Node 0x15 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x440]: 48000 192000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1
Power: setting=D0, actual=D0
Connection: 1
0x18Node 0x16 [Audio Input] wcaps 0x100311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital: Validity
Digital category: 0x0
PCM:
rates [0x1f0]: 32000 44100 48000 88200 96000
bits [0xa]: 16 24
formats [0x5]: PCM AC3
Connection: 1
0x26Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x06, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x10 0x24 0x1d 0x1e 0x21 0x13
Node 0x18 [Audio Selector] wcaps 0x300101: Stereo
Connection: 5
0x17* 0x24 0x1d 0x1e 0x21Node 0x19 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x11
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x12
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 1
0x13
Node 0x1c [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x7febf7ff: [N/A] Reserved at Oth UNKNOWN
Conn = Comb, Color = Other
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x19
Node 0x1d [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xffbff7ff: [Both] Telephony at Oth UNKNOWN
Conn = Other, Color = Other
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x1a
Node 0x1e [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xfffef7fd: [Both] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Other DefAssociation = 0xf, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x19
Node 0x1f [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0xfffffffe: [Both] Other at Oth UNKNOWN
Conn = Other, Color = Other
DefAssociation = 0xf, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x17
Node 0x20 [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0xffef7fff: [Both] Reserved at Oth UNKNOWN
Conn = Other, Color = Yellow
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x17
Node 0x21 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000334: IN OUT Detect
Vref caps: HIZ 50
Pin Default 0xffbe7eff: [Both] Telephony at Oth UNKNOWN
Conn = UNKNOWN, Color = Yellow DefAssociation = 0xf, Sequence = 0xf
Pin-ctls: 0x00: VREF_HIZ
Connection: 1
0x1b
Node 0x22 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0xffffa67f: [Both] Other at Oth UNKNOWN
Conn = Other, Color = UNKNOWN DefAssociation = 0x7, Sequence = 0xf
Pin-ctls: 0x00:
Connection: 1
0x1a
Node 0x23 [Pin Complex] wcaps 0x400101: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0xbffdfffd: [Fixed] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Other DefAssociation = 0xf, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x1b
Node 0x24 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0xdbfbffff: [Both] Other at Int UNKNOWN
Conn = Comb, Color = Other
DefAssociation = 0xf, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0xffefbf7d: [Both] Reserved at Oth UNKNOWN
Conn = Other, Color = UNKNOWN DefAssociation = 0x7, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x14
Node 0x26 [Pin Complex] wcaps 0x400201: Stereo Digital
Pincap 0x00010030: IN OUT EAPD
EAPD 0x0:
Pin Default 0xfffe7fef: [Both] Other at Oth UNKNOWN
Conn = UNKNOWN, Color = Yellow
DefAssociation = 0xe, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x27 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x440]: 48000 192000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1
Power: setting=D0, actual=D0
Connection: 1
0x21--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---- 1 root cyclades 116, 3 Aug 22 01:45 /dev/snd/controlC0 crw-rw---- 1 root cyclades 116, 2 Aug 22 01:45 /dev/snd/hwC0D2 crw-rw---- 1 root cyclades 116, 1 Aug 22 01:45 /dev/snd/seq
crw-rw---- 1 root cyclades 116, 33 Aug 22 01:45 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Aug 22 01:45 .
drwxr-xr-x 3 root root 140 Aug 22 01:45 ..
lrwxrwxrwx 1 root root 12 Aug 22 01:45 pci-0000:00:1b.0 -> ../controlC0
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
#
# Place your global alsa-lib configuration here... #
@hooks [
{
func load
files [
"/etc/alsa/pulse-default.conf"
]
errors false
}]
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
ARECORD
**** List of CAPTURE Hardware Devices ****
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xfea38000 irq 10'
Mixer name : ''
Components : 'HDA:11061708,7fafffdd,00100700'
Controls : 0
Simple ctrls : 0
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control {
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Modulesnd_hda_intelsnd_hda_codecsnd_hwdepsnd_seqsnd_seq_devicesnd_pcmsnd_timer
snd
soundcoresnd_page_alloc
ipv6
fakephp
cgosdrv
joydev
mcs7830
usbnet
mii
usbtouchscreeniTCO_wdtiTCO_vendor_supporti2c_i801serio_raw
pciehp
xfs
i915drm_kms_helper
drmi2c_algo_biti2c_core
video
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D2/init_pin_configs:0x1c 0x7febf7ff0x1d 0xffbff7ff0x1e 0xfffef7fd0x1f 0xfffffffe0x20 0xffef7fff0x21 0xffbe7eff0x22 0xffffa67f0x23 0xbffdfffd0x24 0xdbfbffff0x25 0xffefbf7d0x26 0xfffe7fef
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
!!ALSA/HDA dmesg
!!------------------
[ 21.586023] eth0: no IPv6 routers present [ 34.037438] snd_hda_intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 34.037477] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Quoted 6 lines
I did get plain text messages
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Quoted 7 lines
which are/were all but one empty though.
Thanks,
Paul
It was my mistake that I used HTML mail.
Cheers,
Ghani
At Wed, 28 Sep 2011 11:50:21 +0200,
Quoted 8 lines · Paul Menzel
Am Mittwoch, den 28.09.2011, 11:07 +0200 schrieb Takashi Iwai:
Quoted 6 lines
At Wed, 28 Sep 2011 08:24:43 +0200,
Quoted 3 lines · Abdelghani Ouchabane
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html>
Quoted 8 lines
Quoted 1 line
Please stop using HTML mail.
I did get plain text messages
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bitwhich are/were all but one empty though.
It looks like the ML server translates to text/plain automagically...
Takashi
At Wed, 28 Sep 2011 09:54:46 +0200,
Quoted 24 lines · Abdelghani Ouchabane
Quoted 11 lines · Takashi Iwai
At Tue, 27 Sep 2011 08:41:20 +0200,
sound/pci/hda/patch_via.c
Quoted 4 lines · Abdelghani Ouchabane
diff -auNrp
kernel-2.6.26.orig/sound/pci/hda/patch_via.ckernel-2.6.26.new/sound/pci/hda/patch_via.csound/pci/hda/patch_via.c +0
-0...
Does the problem occur with 3.0 or 3.1-rc kernel?
Hallo Takashi,
It occurs with Fedora 15 ( Kernel : 2.6.39 )
Quoted 5 lines
(Alternatively you can try alsa-driver-snapshot tarball.)
If yes, load the driver with probe_only=1 option, run
alsa-info.shwith --no-upload option, and attach the output.I attached to you the following :
1 - The output of alsa-info.sh ( probe_only=1 + --no-upload + my
Quoted 8 lines
changes(ezonopatch) + alsa-driver 1.0.24 )
2 - The output of alsa-info.sh ( probe_only=1 + --no-upload +alsa-driver-snapshot ( alsa-driver-1.0.24.72.g7c48f.1314.geb1d0)
3 - With alsa-driver-1.0.24.72.g7c48f.1314.geb1d0 : modprobe
snd_hda_intel: The system did not crash but alsamixer said that "This sound device does not have any controls"
OK, it's good to hear. So 3.1 kernel is fine as is. Only 3.0 and earlier can get Oops with buggy BIOS setups.
I can easily fix it up, but maybe better first stabilize 3.1 and make similar 3.0 stable patch.
thanks,
Takashi
Quoted 5 lines
OK, it's good to hear. So 3.1 kernel is fine as is. Only 3.0 and earlier can get Oops with buggy BIOS setups.
Quoted 8 lines
I can easily fix it up, but maybe better first stabilize 3.1 and make similar 3.0 stable patch.
thanks,
Takashi
Do I need to contact the manufacturer of my board to fix the BIOS as well, or it can be fixed by a patch?
Many thanks,
Ghani
At Wed, 28 Sep 2011 14:22:02 +0200,
Quoted 10 lines · Abdelghani Ouchabane
Quoted 10 lines
OK, it's good to hear. So 3.1 kernel is fine as is. Only 3.0 and earlier can get Oops with buggy BIOS setups.
I can easily fix it up, but maybe better first stabilize 3.1 and make similar 3.0 stable patch.
Quoted 6 lines
Quoted 4 lines
thanks,
Takashi
Do I need to contact the manufacturer of my board to fix the BIOS as well, or it can be fixed by a patch?
The easiest way is to create a file and feed via "patch" option of snd-hda-intel module as Clemens suggested.
Takashi
Quoted 16 lines · Takashi Iwai
At Wed, 28 Sep 2011 14:22:02 +0200,
Quoted 13 lines · Abdelghani Ouchabane
Quoted 13 lines
OK, it's good to hear. So 3.1 kernel is fine as is. Only 3.0 and earlier can get Oops with buggy BIOS setups.
I can easily fix it up, but maybe better first stabilize 3.1 and make similar 3.0 stable patch.
thanks,
Takashi
Quoted 8 lines
Quoted 3 lines
Do I need to contact the manufacturer of my board to fix the BIOS as well, or it can be fixed by a patch?
The easiest way is to create a file and feed via "patch" option of snd-hda-intel module as Clemens suggested.
I have three systems with the same hardware and software,
in /proc/asound/card0/codec#2
system 1 : Subsystem Id: 0x7fafffdd
system 2 : Subsystem Id: 0xffffffff
system 3 : Subsystem Id: 0xff7f7fa3
Why the "Subsystem Id" is different between the three systems?
Is there a way to don't use it in :
[codec]
vendor-id subsystem-id address
If I set the right subsystem-id in /lib/firmware/forgotten-ezono-hda-settings, the kernel doesn't crash and the sound works perfectly.
I need one /lib/firmware/forgotten-ezono-hda-settings for all systems and I can not get "Subsystem Id" before loading snd_hda_intel successfully
Any idea please?
Thanks,
Ghani
At Wed, 28 Sep 2011 14:51:26 +0200,
Quoted 28 lines · Abdelghani Ouchabane
Quoted 16 lines · Takashi Iwai
At Wed, 28 Sep 2011 14:22:02 +0200,
Quoted 13 lines · Abdelghani Ouchabane
Quoted 13 lines
OK, it's good to hear. So 3.1 kernel is fine as is. Only 3.0 and earlier can get Oops with buggy BIOS setups.
I can easily fix it up, but maybe better first stabilize 3.1 and make similar 3.0 stable patch.
thanks,
Takashi
Quoted 8 lines
Quoted 3 lines
Do I need to contact the manufacturer of my board to fix the BIOS as well, or it can be fixed by a patch?
The easiest way is to create a file and feed via "patch" option of snd-hda-intel module as Clemens suggested.
I have three systems with the same hardware and software,
Quoted 7 lines
in /proc/asound/card0/codec#2
system 1 : Subsystem Id:
0x7fafffdd
system 2 : Subsystem Id:0xffffffff
system 3 : Subsystem Id:0xff7f7fa3Why the "Subsystem Id" is different between the three systems?
Don't know. All look very broken. Are the machines really OK?
Quoted 5 lines
Is there a way to don't use it in :
[codec]
vendor-id subsystem-id address
Quoted 8 lines
If I set the right subsystem-id in
/lib/firmware/forgotten-ezono-hda-settings, the kernel doesn't crash and the sound works perfectly.I need one
/lib/firmware/forgotten-ezono-hda-settingsfor all systems and I can not get "Subsystem Id" before loadingsnd_hda_intelsuccessfullyAny idea please?
You could apply the patch like below, and pass 0 or -1 to vendor and subsystem ids.
Takashi
---
sound/pci/hda/hda_hwdep.c +2 -2
@@ -649,8 +649,8 @@ static void parse_codec_mode(char *buf, struct hda_bus *bus, *codecp =NULL ;if (sscanf (buf,"%i %i %i" , &vendorid, &subid, &caddr) ==3 ) {list_for_each_entry (codec, &bus->codec_list, list) { -if (codec->vendor_id == vendorid && - codec->subsystem_id == subid && +if ((vendor <=0 || codec->vendor_id == vendorid) && + (subid <=0 || codec->subsystem_id == subid) && codec->addr == caddr) { *codecp = codec;break ;
Quoted 7 lines · Abdelghani Ouchabane
in /proc/asound/card0/codec#2
system 1 : Subsystem Id:
0x7fafffdd
system 2 : Subsystem Id:0xffffffff
system 3 : Subsystem Id:0xff7f7fa3Why the "Subsystem Id" is different between the three systems?
This is a HDA codec register that should be initialized by the BIOS. Apparently, yours doesn't, and the register contents are somewhat random.
Bug whoever is responsible for that BIOS. A system not initializing the pin config and subsystem registers is a violation of the HDA specification.
Regards,
Clemens
Quoted 37 lines · Takashi Iwai
At Wed, 28 Sep 2011 14:51:26 +0200,
Quoted 34 lines · Abdelghani Ouchabane
Quoted 19 lines · Takashi Iwai
At Wed, 28 Sep 2011 14:22:02 +0200,
Quoted 15 lines · Abdelghani Ouchabane
Quoted 15 lines
OK, it's good to hear. So 3.1 kernel is fine as is. Only 3.0 and earlier can get Oops with buggy BIOS setups.
I can easily fix it up, but maybe better first stabilize 3.1 and make similar 3.0 stable patch.
thanks,
Takashi
Quoted 9 lines
Quoted 4 lines
Do I need to contact the manufacturer of my board to fix the BIOS as well, or it can be fixed by a patch?
The easiest way is to create a file and feed via "patch" option of snd-hda-intel module as Clemens suggested.
I have three systems with the same hardware and software,
in /proc/asound/card0/codec#2
Quoted 10 lines
Quoted 6 lines
system 1 : Subsystem Id:
0x7fafffdd
system 2 : Subsystem Id:0xffffffff
system 3 : Subsystem Id:0xff7f7fa3Why the "Subsystem Id" is different between the three systems?
Don't know. All look very broken. Are the machines really OK?
Yes , they are.
Quoted 29 lines
Quoted 5 lines
Is there a way to don't use it in :
[codec]
vendor-id subsystem-id addressQuoted 9 lines
If I set the right subsystem-id in
/lib/firmware/forgotten-ezono-hda-settings, the kernel doesn't crash and the sound works perfectly.I need one
/lib/firmware/forgotten-ezono-hda-settingsfor all systems and I can not get "Subsystem Id" before loadingsnd_hda_intelsuccessfullyAny idea please?
You could apply the patch like below, and pass 0 or -1 to vendor and subsystem ids.
Takashi
---
sound/pci/hda/hda_hwdep.c +0
-0
sound/pci/hda/hda_hwdep.c static void parse_codec_mode(char *buf, struct hda_bus *bus, · line 656
Quoted 10 lines
sound/pci/hda/hda_hwdep.c +2
-2@@ -649,8 +649,8 @@ static void parse_codec_mode(char *buf, struct hda_bus *bus, *codecp =NULL ;if (sscanf (buf,"%i %i %i" , &vendorid, &subid, &caddr) ==3 ) {list_for_each_entry (codec, &bus->codec_list, list) { -if (codec->vendor_id == vendorid && - codec->subsystem_id == subid && +if ((vendor <=0 || codec->vendor_id == vendorid) && + (subid <=0 || codec->subsystem_id == subid) && codec->addr == caddr) { *codecp = codec;break ;
Thanks a lot.
Quoted 14 lines · Clemens Ladisch
Quoted 8 lines · Abdelghani Ouchabane
in /proc/asound/card0/codec#2
system 1 : Subsystem Id:
0x7fafffdd
system 2 : Subsystem Id:0xffffffff
system 3 : Subsystem Id:0xff7f7fa3Why the "Subsystem Id" is different between the three systems?
This is a HDA codec register that should be initialized by the BIOS. Apparently, yours doesn't, and the register contents are somewhat random.
Quoted 8 lines
Bug whoever is responsible for that BIOS. A system not initializing the pin config and subsystem registers is a violation of the HDA specification.
Regards,
Clemens
Thanks, I will use your solution + patch and I will contact the manufacturer of the boards to fix the BIOS.
Many thanks Clemens & Takashi for your great supports.
Cheers,
Ghani