Skip to contentSkip to conversation

psyco-dist not supported on 64 bit Linux

DISCUSSION Ulf Samuelsson 3 participants 7 messages Oct 10, 2011 – Oct 13, 2011

lore
Share & tools
lore
#0 lore raw

psyco-dist will not run on a 64 bit linux. The guys behind psyco-dist recommends the use of PyPy

What is the recommendation for 64 bit linux?

Just run without JIT?
Don't run on a 64 bit linux?
Anything else?

Signature · 2 lines
Best Regards
Ulf Samuelsson
#1 lore raw
Quoted 8 lines · Ulf Samuelsson

psyco-dist will not run on a 64 bit linux. The guys behind psyco-dist recommends the use of PyPy

What is the recommendation for 64 bit linux?

Just run without JIT?
Don't run on a 64 bit linux?
Anything else?

Yes, not supporting 64-bit hosts is one of the known limitations of psyco. Being stuck with Python 2.6 is another limitation.

But, latest bitbake appears to be quite fast even w/o using psyco these days. Especially with parallel parsing on multiple cores...

Signature · 1 line
Denys
#2 lore raw
Quoted 6 lines · Denys Dmytriyenko
Quoted 5 lines · Ulf Samuelsson

psyco-dist will not run on a 64 bit linux. The guys behind psyco-dist recommends the use of PyPy

What is the recommendation for 64 bit linux?

Quoted 9 lines
Quoted 3 lines

Just run without JIT?
Don't run on a 64 bit linux?
Anything else?

Yes, not supporting 64-bit hosts is one of the known limitations of psyco. Being stuck with Python 2.6 is another limitation.

But, latest bitbake appears to be quite fast even w/o using psyco these days. Especially with parallel parsing on multiple cores...

OK, I will try without JIT then.

Signature · 2 lines
Best Regards
Ulf Samuelsson
#3 lore raw
Quoted 10 lines · Ulf Samuelsson
Quoted 9 lines · Denys Dmytriyenko
Quoted 8 lines · Ulf Samuelsson

psyco-dist will not run on a 64 bit linux. The guys behind psyco-dist recommends the use of PyPy

What is the recommendation for 64 bit linux?

Just run without JIT?
Don't run on a 64 bit linux?
Anything else?

Quoted 9 lines
Quoted 6 lines

Yes, not supporting 64-bit hosts is one of the known limitations of psyco. Being stuck with Python 2.6 is another limitation.

But, latest bitbake appears to be quite fast even w/o using psyco these days. Especially with parallel parsing on multiple cores...

OK, I will try without JIT then.

Now I have some results.

Building a custom x11 image on a 32 bit Ubuntu 10.10/psyco-dist took 91 minutes. Building the same image on a 64 bit Ubuntu 11.04 without psyco-dist took 109 minutes (The last machine was an i7-920 w 4 GB RAM)
The first might be the same, alternatively it was a machine with 6 GB RAM.

= It takes 20% more time on a 64 bit O/S.

Signature · 2 lines
Best Regards
Ulf Samuelsson
#4 lore raw
Quoted 24 lines · Ulf Samuelsson
Quoted 14 lines · Ulf Samuelsson
Quoted 13 lines · Denys Dmytriyenko
Quoted 8 lines · Ulf Samuelsson

psyco-dist will not run on a 64 bit linux. The guys behind psyco-dist recommends the use of PyPy

What is the recommendation for 64 bit linux?

Just run without JIT?
Don't run on a 64 bit linux?
Anything else?

Yes, not supporting 64-bit hosts is one of the known limitations of psyco.
Being stuck with Python 2.6 is another limitation.

Quoted 7 lines
Quoted 4 lines

But, latest bitbake appears to be quite fast even w/o using psyco these days.
Especially with parallel parsing on multiple cores...

OK, I will try without JIT then.

Now I have some results.

Quoted 9 lines

Building a custom x11 image on a 32 bit Ubuntu 10.10/psyco-dist took 91 minutes.
Building the same image on a 64 bit Ubuntu 11.04 without psyco-dist took 109 minutes
(The last machine was an i7-920 w 4 GB RAM)
The first might be the same, alternatively it was a machine with 6 GB RAM.

= It takes 20% more time on a 64 bit O/S.

are these on same hardware running once 32bit or and second time 64bit OS ?

Quoted 1 line
#5 lore raw
Quoted 35 lines · Khem Raj
Quoted 24 lines · Ulf Samuelsson
Quoted 14 lines · Ulf Samuelsson
Quoted 13 lines · Denys Dmytriyenko
Quoted 8 lines · Ulf Samuelsson

psyco-dist will not run on a 64 bit linux. The guys behind psyco-dist recommends the use of PyPy

What is the recommendation for 64 bit linux?

Just run without JIT?
Don't run on a 64 bit linux?
Anything else?

Yes, not supporting 64-bit hosts is one of the known limitations of psyco.
Being stuck with Python 2.6 is another limitation.

Quoted 7 lines
Quoted 4 lines

But, latest bitbake appears to be quite fast even w/o using psyco these days.
Especially with parallel parsing on multiple cores...

OK, I will try without JIT then.

Now I have some results.

Quoted 9 lines

Building a custom x11 image on a 32 bit Ubuntu 10.10/psyco-dist took 91 minutes.
Building the same image on a 64 bit Ubuntu 11.04 without psyco-dist took 109 minutes
(The last machine was an i7-920 w 4 GB RAM)
The first might be the same, alternatively it was a machine with 6 GB RAM.

= It takes 20% more time on a 64 bit O/S.

Quoted 8 lines

are these on same hardware running once 32bit or and second time 64bit OS ?

Quoted 1 line

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

I have two core i7 machines
#1 Dell Studio XPS with a 2.67 GHz 920 + 4GB of RAM (2 channel)./Ubuntu 11.04/x64
The 109 minutes was measured on machine #1

#2 Homebuilt with a 2.67 GHz 920 + 6 GB of RAM (tri-channel)/Ubuntu 10.04 x86
Gigabyte UD5 Motherboard
The 91 minutes was measured on machine #2.

Both are using the same type of disk Western Digital Black 1 TB and have 1333 MHz memories.

I tried Ubuntu 11.04 / x86 on machine #1 using an external e-SATA Seagate disk some time ago. I do not have the exact figures, but It was within minutes of machine #2, so I think it is safe to assume that the extra time is there due to the lack of JIT compiling.

End of this week, I hope to try on a 4.4 GHz (overclocked) Core-i7 2600k/Ubuntu 11.10/x64. Still only 1333 MHz memory unfortunately.

Signature · 2 lines
Best Regards
Ulf Samuelsson
#6 lore raw
Quoted 73 lines · Ulf Samuelsson
Quoted 47 lines · Khem Raj
Quoted 37 lines · Ulf Samuelsson
Quoted 18 lines · Ulf Samuelsson
Quoted 16 lines · Denys Dmytriyenko
Quoted 9 lines · Ulf Samuelsson

psyco-dist will not run on a 64 bit linux. The guys behind psyco-dist recommends the use of PyPy

What is the recommendation for 64 bit linux?

Just run without JIT?
Don't run on a 64 bit linux?
Anything else?

Yes, not supporting 64-bit hosts is one of the known limitations of psyco.
Being stuck with Python 2.6 is another limitation.

Quoted 7 lines
Quoted 4 lines

But, latest bitbake appears to be quite fast even w/o using psyco these days.
Especially with parallel parsing on multiple cores...

OK, I will try without JIT then.

Now I have some results.

Building a custom x11 image on a 32 bit Ubuntu 10.10/psyco-dist took 91 minutes.
Building the same image on a 64 bit Ubuntu 11.04 without psyco-dist took 109 minutes
(The last machine was an i7-920 w 4 GB RAM)
The first might be the same, alternatively it was a machine with 6 GB RAM.

Quoted 2 lines

= It takes 20% more time on a 64 bit O/S.

are these on same hardware running once 32bit or and second time 64bit OS ?

Quoted 1 line
Quoted 4 lines

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

I have two core i7 machines
#1 Dell Studio XPS with a 2.67 GHz  920 + 4GB of RAM (2 channel)./Ubuntu 11.04/x64
     The 109 minutes was measured on machine #1

#2 Homebuilt with a 2.67 GHz  920 + 6 GB of RAM (tri-channel)/Ubuntu 10.04 x86
    Gigabyte UD5 Motherboard
    The   91 minutes was measured on machine #2.

Both are using the same type of disk Western Digital Black 1 TB and have 1333 MHz memories.

I tried Ubuntu 11.04 / x86 on machine #1 using an external e-SATA Seagate disk
some time ago. I do not have the exact figures, but It was within minutes of machine #2, so I think it is safe to assume that the extra time is there due to the lack of JIT compiling.

Quoted 5 lines

End of this week, I hope to try on a 4.4 GHz (overclocked) Core-i7 2600k/Ubuntu 11.10/x64.
Still only 1333 MHz memory unfortunately.

numbers on same hardware with different OS would be more relevant for comparision

Quoted 10 lines

--
Best Regards
Ulf Samuelsson

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel