Skip to contentSkip to conversation

sony-laptop driver: Volume keys on Sony Vaio TX3 don't work

PATCH John Hughes 4 participants 16 messages Oct 16, 2011 – Oct 19, 2011

Subsystems (2)
x86 platform drivers Sony vaio control device driver
lore
Share & tools
lore

John Hughes

author
#0 lore raw

Even though sony-laptop has code to handle the volume-up/volume-down keys they don't work. Pressing volume-down gets treated as SONYPI_EVENT_PKEY_P1 and volume-up as SONYPI_EVENT_PKEY_P2.

This is because volume-down generates event 0x01 with data mask 0x05 and although the sonypi_volumeev table exists to handle this the table sonypi_pkeyev steals the event before it gets handled.

Re-ordering the entries in the table type3_events and fixing the bug in sonypi_volumeev (up and down were inverted) makes the volume keys work.

See attached patch.

The two remaining problems are:

1. the EJECT key is mapped to FN_E
2. the MUTE key (event 5f, 31) is mapped to nothing. (Not to important as it turns the speaker off in hardware).

platform/x86/sony-laptop.c renamed from platform/x86/sony-laptop.c.orig +3 -3
@@ -1576,8 +1576,8 @@
 
 /* The set of possible volume events */
 static struct sonypi_event sonypi_volumeev[] = {
-	{ 0x01, SONYPI_EVENT_VOLUME_INC_PRESSED },
-	{ 0x02, SONYPI_EVENT_VOLUME_DEC_PRESSED },
+	{ 0x01, SONYPI_EVENT_VOLUME_DEC_PRESSED },
+	{ 0x02, SONYPI_EVENT_VOLUME_INC_PRESSED },
 	{ 0, 0 }
 };
 

@@ -1624,10 +1624,10 @@
 	{ 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev },
 	{ 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev },
 	{ 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev },
+	{ 0x05, SONYPI_PKEY_MASK, sonypi_volumeev },
 	{ 0x05, SONYPI_PKEY_MASK, sonypi_pkeyev },
 	{ 0x05, SONYPI_ZOOM_MASK, sonypi_zoomev },
 	{ 0x05, SONYPI_CAPTURE_MASK, sonypi_captureev },
-	{ 0x05, SONYPI_PKEY_MASK, sonypi_volumeev },
 	{ 0x05, SONYPI_PKEY_MASK, sonypi_brightnessev },
 	{ 0 },
 };
author
#1 lore raw

Bug: changing keycodes generated by sony-laptop doesn't work

Something about the way sony-laptop sends scancodes and keycodes to the input subsystem doesn't work.

1. using the /lib/udev/keymap utility to show the scancodes and keycodes generated by the Sony Vaio keys device shows them out-of sync:

start keymap, press EJECT (mapped by sony-laptop to FN_E) twice, then AV MODE (mapped to PROG1) twice:

# /lib/udev/keymap -i input/event5
Press ESC to finish
scan code: 0x00 key code: fn_e
scan code: 0x1B key code: fn_e
scan code: 0x1B key code: prog1
scan code: 0x20 key code: prog1
^C

Notice that each time a key is pressed the scancode shown is the scancode of the previous key.

2. Changing the keycode for a given scancode has no effect:

# /lib/udev/keymap input/event5 0x1B ejectcd
setting scancode 0x1B to key code 161
# /lib/udev/keymap -i input/event5
Press ESC to finish
scan code: 0x00 key code: fn_e
scan code: 0x1B key code: fn_e
^C

author
#4 lore raw
In reply to John Hughes
Quoted 1 line · John Hughes

Even though sony-laptop has code to handle the volume-up/volume-down keys they don't work. Pressing volume-down gets treated as SONYPI_EVENT_PKEY_P1 and volume-up as SONYPI_EVENT_PKEY_P2.

And of course this bug has already been fixed. Was looking at an old version, 2.6.32, sorry.

Quoted 1 line

Re-ordering the entries in the table type3_events and fixing the bug in sonypi_volumeev (up and down were inverted) makes the volume keys work.

But the current head version still has the bug where volume up/volume down are switched.

author
#2 lore raw

Re: Bug: changing keycodes generated by sony-laptop doesn't work

In reply to John Hughes
Quoted 1 line · John Hughes

Something about the way sony-laptop sends scancodes and keycodes to the input subsystem doesn't work.

I forgot to say that this is in 2.6.32.

Further testing shows that it is possible to change the keycode generated for a particular scancode but that the mapping is wrong.

For example:

# /lib/udev/keymap -i input/event6
Press ESC to finish
scan code: 0x00   key code: fn_e
scan code: 0x1B   key code: fn_e
^C
# /lib/udev/keymap  input/event6 0x14 ejectcd
setting scancode 0x14 to key code 161
# /lib/udev/keymap -i input/event6
Press ESC to finish
scan code: 0x00   key code: ejectcd
scan code: 0x1B   key code: ejectcd
scan code: 0x1B   key code: ejectcd
scan code: 0x1B   key code: ejectcd
^C

All the scancodes are 7 off, setting the mapping for scancode 0x14 changes the mapping for what the driver claims is scancode 0x1B.

I guess this has something to do with a confusion between the jog-dial scancodes and the Vaio keys scancodes.

author
#5 lore raw
In reply to John Hughes
Quoted 4 lines · John Hughes
Quoted 1 line · John Hughes

Even though sony-laptop has code to handle the volume-up/volume-down keys they don't work. Pressing volume-down gets treated as SONYPI_EVENT_PKEY_P1 and volume-up as SONYPI_EVENT_PKEY_P2.

And of course this bug has already been fixed. Was looking at an old version, 2.6.32, sorry.

Must learn to check before writing.

No, the problem has not been fixed in head.

Here's a patch that makes the volume keys work for me. Tested on current git

# uname -a
Linux carbon 3.1.0-rc9+ #2 SMP Sun Oct 16 19:14:15 CEST 2011 i686 GNU/Linux
drivers/platform/x86/sony-laptop.c +3 -3
index bbd182e..ff14b61 100644
@@ -2065,8 +2065,8 @@ static struct sonypi_event sonypi_batteryev[] = {
 
 /* The set of possible volume events */
 static struct sonypi_event sonypi_volumeev[] = {
-	{ 0x01, SONYPI_EVENT_VOLUME_INC_PRESSED },
-	{ 0x02, SONYPI_EVENT_VOLUME_DEC_PRESSED },
+	{ 0x01, SONYPI_EVENT_VOLUME_DEC_PRESSED },
+	{ 0x02, SONYPI_EVENT_VOLUME_INC_PRESSED },
 	{ 0, 0 }
 };
 

@@ -2113,10 +2113,10 @@ static struct sonypi_eventtypes type3_events[] = {
 	{ 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev },
 	{ 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev },
 	{ 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev },
+	{ 0x05, SONYPI_PKEY_MASK, sonypi_volumeev },
 	{ 0x05, SONYPI_PKEY_MASK, sonypi_pkeyev },
 	{ 0x05, SONYPI_ZOOM_MASK, sonypi_zoomev },
 	{ 0x05, SONYPI_CAPTURE_MASK, sonypi_captureev },
-	{ 0x05, SONYPI_PKEY_MASK, sonypi_volumeev },
 	{ 0x05, SONYPI_PKEY_MASK, sonypi_brightnessev },
 	{ 0 },
 };
#6 lore raw

drivers/platform/x86/sony-laptop.c

Quoted 8 lines · John Hughes
Quoted 3 lines
Quoted 3 lines

Even though sony-laptop has code to handle the volume-up/volume-down keys they don't work. Pressing volume-down gets treated as SONYPI_EVENT_PKEY_P1 and volume-up as SONYPI_EVENT_PKEY_P2.

Here's a patch that makes the volume keys work for me. Tested on current git

drivers/platform/x86/sony-laptop.c +0 -0

Do we know if this is applicable to all Sony laptops, or only a few busticated models?

maintainer
#7 lore raw
Quoted 5 lines · On Sun, Oct 16, 2011 at 02:20:18PM -0400, [email protected] wrote:
Quoted 3 lines · John Hughes
Quoted 3 lines
Quoted 3 lines

Even though sony-laptop has code to handle the volume-up/volume-down keys they don't work. Pressing volume-down gets treated as SONYPI_EVENT_PKEY_P1 and volume-up as SONYPI_EVENT_PKEY_P2.

Quoted 7 lines

drivers/platform/x86/sony-laptop.c

Quoted 4 lines

Here's a patch that makes the volume keys work for me. Tested on current git

drivers/platform/x86/sony-laptop.c +0 -0

Do we know if this is applicable to all Sony laptops, or only a few busticated models?

I believe the latter is the case, the old A series also had this problem. Of course applying the patch will break other models (SZ is one I'm sure about) so there is no actual winner here unless we figure out how to properly decode keys on sonypi models (this problem is specifically related to two phase hotkey decoding, see the irq handler). ...I don't have any such old laptop anymore with me.

Signature · 2 lines
mattia
:wq!
#8 lore raw
Quoted 9 lines · Mattia Dongili
Quoted 2 lines · On Sun, Oct 16, 2011 at 02:20:18PM -0400, [email protected] wrote:

Do we know if this is applicable to all Sony laptops, or only a few busticated models?

I believe the latter is the case, the old A series also had this problem. Of course applying the patch will break other models (SZ is one I'm sure about) so there is no actual winner here unless we figure out how to properly decode keys on sonypi models (this problem is specifically related to two phase hotkey decoding, see the irq handler).

And let me guess - two phase hotkey decoding is sufficiently weird that nobody wants to actually fix *that* code, right? (Rhetorical question, I already know the answer to that one).

If that's not an option, perhaps we need a per-model quirk that patches up the tables at boot time? If we do that, we may want to re-arrange the table so the affected entries are at the front or something to help insure we don't patch the wrong entries if somebody else inserts new lines.

author
#15 lore raw
In reply to [email protected]
Quoted 11 lines · On 10/16/2011 08:20 PM, [email protected] wrote:
Quoted 3 lines · John Hughes

Here's a patch that makes the volume keys work for me. Tested on current git

Do we know if this is applicable to all Sony laptops, or only a few busticated models?

The current code is simply wrong. It might work by accident on some models, but.,..

(Why wrong? it says event (0x01,0x05) is PROG1, but event (0x01, 0x05) is Volume up, Make up your mind please. PS it's volume DOWN not up).

Wouldn't it be easier just to leave the decision for user mode? Make the different events generate different "scancodes" and let udev sort them out?

author
#9 lore raw
In reply to [email protected]
Quoted 5 lines · On 10/16/2011 11:50 PM, [email protected] wrote:

And let me guess - two phase hotkey decoding is sufficiently weird that nobody wants to actually fix *that* code, right? (Rhetorical question, I already know the answer to that one).

Ok, what is "two phase hotkey decoding?"

#3 lore raw

Re: Bug: changing keycodes generated by sony-laptop doesn't work

In reply to John Hughes
Quoted 2 lines · John Hughes

All the scancodes are 7 off, setting the mapping for scancode 0x14 changes the mapping for what the driver claims is scancode 0x1B.

Actually it's a bit worse than that.

The "scancodes" used by the sony-laptop driver are the indexes into sony_laptop_input_keycode_map and not the "event" codes at all.

This patch (not yet tested) should fix the scancodes reported by /lib/udev/keymap.

This just leaves a bug in the keymap files included with udev. I guess the sony-laptop file in Documentation needs to say where to find the scancodes.

drivers/platform/x86/sony-laptop.c +5 -4
index bbd182e..f148459 100644
@@ -347,6 +347,7 @@ static void sony_laptop_report_input_event(u8 event)
 	struct input_dev *jog_dev = sony_laptop_input.jog_dev;
 	struct input_dev *key_dev = sony_laptop_input.key_dev;
 	struct sony_laptop_keypress kp = { NULL };
+	int scancode;
 
 	if (event == SONYPI_EVENT_FNKEY_RELEASED ||
 			event == SONYPI_EVENT_ANYBUTTON_RELEASED) {

@@ -380,8 +381,8 @@ static void sony_laptop_report_input_event(u8 event)
 			dprintk("sony_laptop_report_input_event, event not known: %d\n", event);
 			break;
 		}
-		if (sony_laptop_input_index[event] != -1) {
-			kp.key = sony_laptop_input_keycode_map[sony_laptop_input_index[event]];
+		if ((scancode = sony_laptop_input_index[event]) != -1) {
+			kp.key = sony_laptop_input_keycode_map[scancode];
 			if (kp.key != KEY_UNKNOWN)
 				kp.dev = key_dev;
 		}

@@ -389,9 +390,9 @@ static void sony_laptop_report_input_event(u8 event)
 	}
 
 	if (kp.dev) {
-		input_report_key(kp.dev, kp.key, 1);
 		/* we emit the scancode so we can always remap the key */
-		input_event(kp.dev, EV_MSC, MSC_SCAN, event);
+		input_event(kp.dev, EV_MSC, MSC_SCAN, scancode);
+		input_report_key(kp.dev, kp.key, 1);
 		input_sync(kp.dev);
 
 		/* schedule key release */
maintainer
#10 lore raw
In reply to John Hughes
Quoted 6 lines · John Hughes
Quoted 4 lines · On 10/16/2011 11:50 PM, [email protected] wrote:

And let me guess - two phase hotkey decoding is sufficiently weird that nobody wants to actually fix *that* code, right? (Rhetorical question, I already know the answer to that one).

Ok, what is "two phase hotkey decoding?"

basically the driver receives in IRQ, reads from the IO port a value that turns out to be a generic value that means "got a hotkey" and needs to write one more command to the IO port and wait for another IRQ that potentially has the information about what hotkey was pressed.

The part we're currently missing is what to write to the IO port for some models.

See type3_handle_irq in the source and type3_events: most of those with data=0x05 require extra handling that we are not doing.
On the second IRQ you get some data=0x31 and the actual event.

Hope it's clearer.

Signature · 2 lines
mattia
:wq!
maintainer
#12 lore raw
In reply to [email protected]
Quoted 11 lines · On Sun, Oct 16, 2011 at 05:50:13PM -0400, [email protected] wrote:
Quoted 9 lines · Mattia Dongili
Quoted 2 lines · On Sun, Oct 16, 2011 at 02:20:18PM -0400, [email protected] wrote:

Do we know if this is applicable to all Sony laptops, or only a few busticated models?

I believe the latter is the case, the old A series also had this problem. Of course applying the patch will break other models (SZ is one I'm sure about) so there is no actual winner here unless we figure out how to properly decode keys on sonypi models (this problem is specifically related to two phase hotkey decoding, see the irq handler).

Quoted 8 lines

And let me guess - two phase hotkey decoding is sufficiently weird that nobody wants to actually fix *that* code, right? (Rhetorical question, I already know the answer to that one).

If that's not an option, perhaps we need a per-model quirk that patches up the tables at boot time? If we do that, we may want to re-arrange the table so the affected entries are at the front or something to help insure we don't patch the wrong entries if somebody else inserts new lines.

Wouldn't udev do that already?
We may actually want to remove those events that never get looked up in the tables instead.

Signature · 2 lines
mattia
:wq!
#11 lore raw
In reply to Mattia Dongili
Quoted 9 lines · Mattia Dongili
Quoted 2 lines · John Hughes

Ok, what is "two phase hotkey decoding?"

basically the driver receives in IRQ, reads from the IO port a value that turns out to be a generic value that means "got a hotkey" and needs to write one more command to the IO port and wait for another IRQ that potentially has the information about what hotkey was pressed.

Quoted 8 lines

The part we're currently missing is what to write to the IO port for some models.

See type3_handle_irq in the source and type3_events: most of those with data=0x05 require extra handling that we are not doing.
On the second IRQ you get some data=0x31 and the actual event.

Oh, I see.

Poking around in the dark. What fun.

I'll see if I can think of any useful experiments.

#13 lore raw
In reply to Mattia Dongili
Quoted 4 lines · Mattia Dongili
Quoted 2 lines · On Sun, Oct 16, 2011 at 05:50:13PM -0400, [email protected] wrote:

On Mon, 17 Oct 2011 06:38:01 +0900, Mattia Dongili said:

Quoted 10 lines
Quoted 5 lines

If that's not an option, perhaps we need a per-model quirk that patches up the tables at boot time? If we do that, we may want to re-arrange the table so the affected entries are at the front or something to help insure we don't patch the wrong entries if somebody else inserts new lines.

Wouldn't udev do that already?
We may actually want to remove those events that never get looked up in the tables instead.

udev does have some per-model stuff for the Vaio's.

Doesn't work right because the scancodes reported the sony-laptop driver are not the right ones.

(sony-laptop sends its "event" code as the scancode, but to change the keymap you have to use the index in the sony_laptop_input_keycode_map table. I have posted one patch for this which makes the scancodes at least consistent but I think I'll do another that makes them be the same as what current udev thinks they should be. I'll have that ready this evening I thing - have to work now :-( )

author
#14 lore raw
Quoted 6 lines · John Hughes

udev does have some per-model stuff for the Vaio's.

Doesn't work right because the scancodes reported the sony-laptop driver are not the right ones.

(sony-laptop sends its "event" code as the scancode, but to change the keymap you have to use the index in the sony_laptop_input_keycode_map table. I have posted one patch for this which makes the scancodes at least consistent but I think I'll do another that makes them be the same as what current udev thinks they should be. I'll have that ready this evening I thing - have to work now :-( )

Ok, here is a patch that makes the scancodes reported by sony-laptop be the same as the SONY_EVENT defines.

Unfortunately this doesn't work terribly well because the scancodes used by udev seem to be chosen randomly:

$ cat /lib/udev/keymaps/module-sony
0x06 mute # Fn+F2
0x07 volumedown # Fn+F3
0x08 volumeup # Fn+F4
0x09 brightnessdown # Fn+F5
0x0A brightnessup # Fn+F6
0x0B switchvideomode # Fn+F7
0x0E zoom # Fn+F10
0x10 suspend # Fn+F12

and

$ cat /lib/udev/keymaps/module-sony-vgn
0x00 brightnessdown # Fn+F5
0x10 brightnessup # Fn+F6
0x11 switchvideomode # Fn+F7
0x12 zoomout
0x14 zoomin
0x15 suspend # Fn+F12
0x17 prog1

So the different ideas are:

key      module-sony  module-sony-vgn   orig code(*)   event(*)
fn_f1                                   0x05           0x0c
fn_f2    0x06                           0x06           0x0d
fn_f3    0x07                           0x07           0x0e
fn_f4    0x08                           0x08           0x0f
fn_f5    0x09          0x00 (!)         0x09           0x10
fn_f6    0x0a          0x10             0x0a           0x11
fn_f7    0x0b          0x11             0x0b           0x12
fn_f8                                   0x0c           0x13
fn_f9                                   0x0d           0x14
fn_f10   0x0e                           0x0e           0x15
fn_f11                                  0x0f           0x16
fn_f12   0x10          0x15             0x10           0x17

(*) Orig code - the scancodes that map for the original code, and the scancodes returned by my first patch (*) event - the scancodes from the patch included here.

So, it seems to me that:

1. my original patch is the smaller change, and works with the udev "module-sony" keymap file

2. this patch is prettier but doesn't work with existing userspace.

3. the poor sod who wrote the module-sony-vgn file was terribly confused by the scancodes returned by the original code.

My recommendation would be to use my first patch - it makes the driver return scancodes that correspond to the scancodes that you need to map.

OK?

Want me to do the whole formal "blablabla-by" stuff now?

drivers/platform/x86/sony-laptop.c +80 -145
index bbd182e..e2acfd5 100644
@@ -177,146 +177,83 @@ struct sony_laptop_keypress {
 };
 
 /* Correspondance table between sonypi events
- * and input layer indexes in the keymap
+ * and keycodes
  */
-static int sony_laptop_input_index[] = {
-	-1,	/*  0 no event */
-	-1,	/*  1 SONYPI_EVENT_JOGDIAL_DOWN */
-	-1,	/*  2 SONYPI_EVENT_JOGDIAL_UP */
-	-1,	/*  3 SONYPI_EVENT_JOGDIAL_DOWN_PRESSED */
-	-1,	/*  4 SONYPI_EVENT_JOGDIAL_UP_PRESSED */
-	-1,	/*  5 SONYPI_EVENT_JOGDIAL_PRESSED */
-	-1,	/*  6 SONYPI_EVENT_JOGDIAL_RELEASED */
-	 0,	/*  7 SONYPI_EVENT_CAPTURE_PRESSED */
-	 1,	/*  8 SONYPI_EVENT_CAPTURE_RELEASED */
-	 2,	/*  9 SONYPI_EVENT_CAPTURE_PARTIALPRESSED */
-	 3,	/* 10 SONYPI_EVENT_CAPTURE_PARTIALRELEASED */
-	 4,	/* 11 SONYPI_EVENT_FNKEY_ESC */
-	 5,	/* 12 SONYPI_EVENT_FNKEY_F1 */
-	 6,	/* 13 SONYPI_EVENT_FNKEY_F2 */
-	 7,	/* 14 SONYPI_EVENT_FNKEY_F3 */
-	 8,	/* 15 SONYPI_EVENT_FNKEY_F4 */
-	 9,	/* 16 SONYPI_EVENT_FNKEY_F5 */
-	10,	/* 17 SONYPI_EVENT_FNKEY_F6 */
-	11,	/* 18 SONYPI_EVENT_FNKEY_F7 */
-	12,	/* 19 SONYPI_EVENT_FNKEY_F8 */
-	13,	/* 20 SONYPI_EVENT_FNKEY_F9 */
-	14,	/* 21 SONYPI_EVENT_FNKEY_F10 */
-	15,	/* 22 SONYPI_EVENT_FNKEY_F11 */
-	16,	/* 23 SONYPI_EVENT_FNKEY_F12 */
-	17,	/* 24 SONYPI_EVENT_FNKEY_1 */
-	18,	/* 25 SONYPI_EVENT_FNKEY_2 */
-	19,	/* 26 SONYPI_EVENT_FNKEY_D */
-	20,	/* 27 SONYPI_EVENT_FNKEY_E */
-	21,	/* 28 SONYPI_EVENT_FNKEY_F */
-	22,	/* 29 SONYPI_EVENT_FNKEY_S */
-	23,	/* 30 SONYPI_EVENT_FNKEY_B */
-	24,	/* 31 SONYPI_EVENT_BLUETOOTH_PRESSED */
-	25,	/* 32 SONYPI_EVENT_PKEY_P1 */
-	26,	/* 33 SONYPI_EVENT_PKEY_P2 */
-	27,	/* 34 SONYPI_EVENT_PKEY_P3 */
-	28,	/* 35 SONYPI_EVENT_BACK_PRESSED */
-	-1,	/* 36 SONYPI_EVENT_LID_CLOSED */
-	-1,	/* 37 SONYPI_EVENT_LID_OPENED */
-	29,	/* 38 SONYPI_EVENT_BLUETOOTH_ON */
-	30,	/* 39 SONYPI_EVENT_BLUETOOTH_OFF */
-	31,	/* 40 SONYPI_EVENT_HELP_PRESSED */
-	32,	/* 41 SONYPI_EVENT_FNKEY_ONLY */
-	33,	/* 42 SONYPI_EVENT_JOGDIAL_FAST_DOWN */
-	34,	/* 43 SONYPI_EVENT_JOGDIAL_FAST_UP */
-	35,	/* 44 SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED */
-	36,	/* 45 SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED */
-	37,	/* 46 SONYPI_EVENT_JOGDIAL_VFAST_DOWN */
-	38,	/* 47 SONYPI_EVENT_JOGDIAL_VFAST_UP */
-	39,	/* 48 SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED */
-	40,	/* 49 SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED */
-	41,	/* 50 SONYPI_EVENT_ZOOM_PRESSED */
-	42,	/* 51 SONYPI_EVENT_THUMBPHRASE_PRESSED */
-	43,	/* 52 SONYPI_EVENT_MEYE_FACE */
-	44,	/* 53 SONYPI_EVENT_MEYE_OPPOSITE */
-	45,	/* 54 SONYPI_EVENT_MEMORYSTICK_INSERT */
-	46,	/* 55 SONYPI_EVENT_MEMORYSTICK_EJECT */
-	-1,	/* 56 SONYPI_EVENT_ANYBUTTON_RELEASED */
-	-1,	/* 57 SONYPI_EVENT_BATTERY_INSERT */
-	-1,	/* 58 SONYPI_EVENT_BATTERY_REMOVE */
-	-1,	/* 59 SONYPI_EVENT_FNKEY_RELEASED */
-	47,	/* 60 SONYPI_EVENT_WIRELESS_ON */
-	48,	/* 61 SONYPI_EVENT_WIRELESS_OFF */
-	49,	/* 62 SONYPI_EVENT_ZOOM_IN_PRESSED */
-	50,	/* 63 SONYPI_EVENT_ZOOM_OUT_PRESSED */
-	51,	/* 64 SONYPI_EVENT_CD_EJECT_PRESSED */
-	52,	/* 65 SONYPI_EVENT_MODEKEY_PRESSED */
-	53,	/* 66 SONYPI_EVENT_PKEY_P4 */
-	54,	/* 67 SONYPI_EVENT_PKEY_P5 */
-	55,	/* 68 SONYPI_EVENT_SETTINGKEY_PRESSED */
-	56,	/* 69 SONYPI_EVENT_VOLUME_INC_PRESSED */
-	57,	/* 70 SONYPI_EVENT_VOLUME_DEC_PRESSED */
-	-1,	/* 71 SONYPI_EVENT_BRIGHTNESS_PRESSED */
-	58,	/* 72 SONYPI_EVENT_MEDIA_PRESSED */
-	59,	/* 72 SONYPI_EVENT_VENDOR_PRESSED */
-};
-
 static int sony_laptop_input_keycode_map[] = {
-	KEY_CAMERA,	/*  0 SONYPI_EVENT_CAPTURE_PRESSED */
-	KEY_RESERVED,	/*  1 SONYPI_EVENT_CAPTURE_RELEASED */
-	KEY_RESERVED,	/*  2 SONYPI_EVENT_CAPTURE_PARTIALPRESSED */
-	KEY_RESERVED,	/*  3 SONYPI_EVENT_CAPTURE_PARTIALRELEASED */
-	KEY_FN_ESC,	/*  4 SONYPI_EVENT_FNKEY_ESC */
-	KEY_FN_F1,	/*  5 SONYPI_EVENT_FNKEY_F1 */
-	KEY_FN_F2,	/*  6 SONYPI_EVENT_FNKEY_F2 */
-	KEY_FN_F3,	/*  7 SONYPI_EVENT_FNKEY_F3 */
-	KEY_FN_F4,	/*  8 SONYPI_EVENT_FNKEY_F4 */
-	KEY_FN_F5,	/*  9 SONYPI_EVENT_FNKEY_F5 */
-	KEY_FN_F6,	/* 10 SONYPI_EVENT_FNKEY_F6 */
-	KEY_FN_F7,	/* 11 SONYPI_EVENT_FNKEY_F7 */
-	KEY_FN_F8,	/* 12 SONYPI_EVENT_FNKEY_F8 */
-	KEY_FN_F9,	/* 13 SONYPI_EVENT_FNKEY_F9 */
-	KEY_FN_F10,	/* 14 SONYPI_EVENT_FNKEY_F10 */
-	KEY_FN_F11,	/* 15 SONYPI_EVENT_FNKEY_F11 */
-	KEY_FN_F12,	/* 16 SONYPI_EVENT_FNKEY_F12 */
-	KEY_FN_F1,	/* 17 SONYPI_EVENT_FNKEY_1 */
-	KEY_FN_F2,	/* 18 SONYPI_EVENT_FNKEY_2 */
-	KEY_FN_D,	/* 19 SONYPI_EVENT_FNKEY_D */
-	KEY_FN_E,	/* 20 SONYPI_EVENT_FNKEY_E */
-	KEY_FN_F,	/* 21 SONYPI_EVENT_FNKEY_F */
-	KEY_FN_S,	/* 22 SONYPI_EVENT_FNKEY_S */
-	KEY_FN_B,	/* 23 SONYPI_EVENT_FNKEY_B */
-	KEY_BLUETOOTH,	/* 24 SONYPI_EVENT_BLUETOOTH_PRESSED */
-	KEY_PROG1,	/* 25 SONYPI_EVENT_PKEY_P1 */
-	KEY_PROG2,	/* 26 SONYPI_EVENT_PKEY_P2 */
-	KEY_PROG3,	/* 27 SONYPI_EVENT_PKEY_P3 */
-	KEY_BACK,	/* 28 SONYPI_EVENT_BACK_PRESSED */
-	KEY_BLUETOOTH,	/* 29 SONYPI_EVENT_BLUETOOTH_ON */
-	KEY_BLUETOOTH,	/* 30 SONYPI_EVENT_BLUETOOTH_OFF */
-	KEY_HELP,	/* 31 SONYPI_EVENT_HELP_PRESSED */
-	KEY_FN,		/* 32 SONYPI_EVENT_FNKEY_ONLY */
-	KEY_RESERVED,	/* 33 SONYPI_EVENT_JOGDIAL_FAST_DOWN */
-	KEY_RESERVED,	/* 34 SONYPI_EVENT_JOGDIAL_FAST_UP */
-	KEY_RESERVED,	/* 35 SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED */
-	KEY_RESERVED,	/* 36 SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED */
-	KEY_RESERVED,	/* 37 SONYPI_EVENT_JOGDIAL_VFAST_DOWN */
-	KEY_RESERVED,	/* 38 SONYPI_EVENT_JOGDIAL_VFAST_UP */
-	KEY_RESERVED,	/* 39 SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED */
-	KEY_RESERVED,	/* 40 SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED */
-	KEY_ZOOM,	/* 41 SONYPI_EVENT_ZOOM_PRESSED */
-	BTN_THUMB,	/* 42 SONYPI_EVENT_THUMBPHRASE_PRESSED */
-	KEY_RESERVED,	/* 43 SONYPI_EVENT_MEYE_FACE */
-	KEY_RESERVED,	/* 44 SONYPI_EVENT_MEYE_OPPOSITE */
-	KEY_RESERVED,	/* 45 SONYPI_EVENT_MEMORYSTICK_INSERT */
-	KEY_RESERVED,	/* 46 SONYPI_EVENT_MEMORYSTICK_EJECT */
-	KEY_WLAN,	/* 47 SONYPI_EVENT_WIRELESS_ON */
-	KEY_WLAN,	/* 48 SONYPI_EVENT_WIRELESS_OFF */
-	KEY_ZOOMIN,	/* 49 SONYPI_EVENT_ZOOM_IN_PRESSED */
-	KEY_ZOOMOUT,	/* 50 SONYPI_EVENT_ZOOM_OUT_PRESSED */
-	KEY_EJECTCD,	/* 51 SONYPI_EVENT_CD_EJECT_PRESSED */
-	KEY_F13,	/* 52 SONYPI_EVENT_MODEKEY_PRESSED */
-	KEY_PROG4,	/* 53 SONYPI_EVENT_PKEY_P4 */
-	KEY_F14,	/* 54 SONYPI_EVENT_PKEY_P5 */
-	KEY_F15,	/* 55 SONYPI_EVENT_SETTINGKEY_PRESSED */
-	KEY_VOLUMEUP,	/* 56 SONYPI_EVENT_VOLUME_INC_PRESSED */
-	KEY_VOLUMEDOWN,	/* 57 SONYPI_EVENT_VOLUME_DEC_PRESSED */
-	KEY_MEDIA,	/* 58 SONYPI_EVENT_MEDIA_PRESSED */
-	KEY_VENDOR,	/* 59 SONYPI_EVENT_VENDOR_PRESSED */
+	KEY_UNKNOWN,	/*  0 no event */
+	KEY_UNKNOWN,	/*  1 SONYPI_EVENT_JOGDIAL_DOWN */
+	KEY_UNKNOWN,	/*  2 SONYPI_EVENT_JOGDIAL_UP */
+	KEY_UNKNOWN,	/*  3 SONYPI_EVENT_JOGDIAL_DOWN_PRESSED */
+	KEY_UNKNOWN,	/*  4 SONYPI_EVENT_JOGDIAL_UP_PRESSED */
+	KEY_UNKNOWN,	/*  5 SONYPI_EVENT_JOGDIAL_PRESSED */
+	KEY_UNKNOWN,	/*  6 SONYPI_EVENT_JOGDIAL_RELEASED */
+	KEY_CAMERA,	/*  7 SONYPI_EVENT_CAPTURE_PRESSED */
+	KEY_RESERVED,	/*  8 SONYPI_EVENT_CAPTURE_RELEASED */
+	KEY_RESERVED,	/*  9 SONYPI_EVENT_CAPTURE_PARTIALPRESSED */
+	KEY_RESERVED,	/* 10 SONYPI_EVENT_CAPTURE_PARTIALRELEASED */
+	KEY_FN_ESC,	/* 11 SONYPI_EVENT_FNKEY_ESC */
+	KEY_FN_F1,	/* 12 SONYPI_EVENT_FNKEY_F1 */
+	KEY_FN_F2,	/* 13 SONYPI_EVENT_FNKEY_F2 */
+	KEY_FN_F3,	/* 14 SONYPI_EVENT_FNKEY_F3 */
+	KEY_FN_F4,	/* 15 SONYPI_EVENT_FNKEY_F4 */
+	KEY_FN_F5,	/* 16 SONYPI_EVENT_FNKEY_F5 */
+	KEY_FN_F6,	/* 17 SONYPI_EVENT_FNKEY_F6 */
+	KEY_FN_F7,	/* 18 SONYPI_EVENT_FNKEY_F7 */
+	KEY_FN_F8,	/* 19 SONYPI_EVENT_FNKEY_F8 */
+	KEY_FN_F9,	/* 20 SONYPI_EVENT_FNKEY_F9 */
+	KEY_FN_F10,	/* 21 SONYPI_EVENT_FNKEY_F10 */
+	KEY_FN_F11,	/* 22 SONYPI_EVENT_FNKEY_F11 */
+	KEY_FN_F12,	/* 23 SONYPI_EVENT_FNKEY_F12 */
+	KEY_FN_F1,	/* 24 SONYPI_EVENT_FNKEY_1 */
+	KEY_FN_F2,	/* 25 SONYPI_EVENT_FNKEY_2 */
+	KEY_FN_D,	/* 26 SONYPI_EVENT_FNKEY_D */
+	KEY_FN_E,	/* 27 SONYPI_EVENT_FNKEY_E */
+	KEY_FN_F,	/* 28 SONYPI_EVENT_FNKEY_F */
+	KEY_FN_S,	/* 29 SONYPI_EVENT_FNKEY_S */
+	KEY_FN_B,	/* 30 SONYPI_EVENT_FNKEY_B */
+	KEY_BLUETOOTH,	/* 31 SONYPI_EVENT_BLUETOOTH_PRESSED */
+	KEY_PROG1,	/* 32 SONYPI_EVENT_PKEY_P1 */
+	KEY_PROG2,	/* 33 SONYPI_EVENT_PKEY_P2 */
+	KEY_PROG3,	/* 34 SONYPI_EVENT_PKEY_P3 */
+	KEY_BACK,	/* 35 SONYPI_EVENT_BACK_PRESSED */
+	KEY_UNKNOWN,	/* 36 SONYPI_EVENT_LID_CLOSED */
+	KEY_UNKNOWN,	/* 37 SONYPI_EVENT_LID_OPENED */
+	KEY_BLUETOOTH,	/* 38 SONYPI_EVENT_BLUETOOTH_ON */
+	KEY_BLUETOOTH,	/* 39 SONYPI_EVENT_BLUETOOTH_OFF */
+	KEY_HELP,	/* 40 SONYPI_EVENT_HELP_PRESSED */
+	KEY_FN,		/* 41 SONYPI_EVENT_FNKEY_ONLY */
+	KEY_RESERVED,	/* 42 SONYPI_EVENT_JOGDIAL_FAST_DOWN */
+	KEY_RESERVED,	/* 43 SONYPI_EVENT_JOGDIAL_FAST_UP */
+	KEY_RESERVED,	/* 44 SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED */
+	KEY_RESERVED,	/* 45 SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED */
+	KEY_RESERVED,	/* 46 SONYPI_EVENT_JOGDIAL_VFAST_DOWN */
+	KEY_RESERVED,	/* 47 SONYPI_EVENT_JOGDIAL_VFAST_UP */
+	KEY_RESERVED,	/* 48 SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED */
+	KEY_RESERVED,	/* 49 SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED */
+	KEY_ZOOM,	/* 50 SONYPI_EVENT_ZOOM_PRESSED */
+	BTN_THUMB,	/* 51 SONYPI_EVENT_THUMBPHRASE_PRESSED */
+	KEY_RESERVED,	/* 52 SONYPI_EVENT_MEYE_FACE */
+	KEY_RESERVED,	/* 53 SONYPI_EVENT_MEYE_OPPOSITE */
+	KEY_RESERVED,	/* 54 SONYPI_EVENT_MEMORYSTICK_INSERT */
+	KEY_RESERVED,	/* 55 SONYPI_EVENT_MEMORYSTICK_EJECT */
+	KEY_UNKNOWN,	/* 56 SONYPI_EVENT_ANYBUTTON_RELEASED */
+	KEY_UNKNOWN,	/* 57 SONYPI_EVENT_BATTERY_INSERT */
+	KEY_UNKNOWN,	/* 58 SONYPI_EVENT_BATTERY_REMOVE */
+	KEY_UNKNOWN,	/* 59 SONYPI_EVENT_FNKEY_RELEASED */
+	KEY_WLAN,	/* 60 SONYPI_EVENT_WIRELESS_ON */
+	KEY_WLAN,	/* 61 SONYPI_EVENT_WIRELESS_OFF */
+	KEY_ZOOMIN,	/* 62 SONYPI_EVENT_ZOOM_IN_PRESSED */
+	KEY_ZOOMOUT,	/* 63 SONYPI_EVENT_ZOOM_OUT_PRESSED */
+	KEY_EJECTCD,	/* 64 SONYPI_EVENT_CD_EJECT_PRESSED */
+	KEY_F13,	/* 65 SONYPI_EVENT_MODEKEY_PRESSED */
+	KEY_PROG4,	/* 66 SONYPI_EVENT_PKEY_P4 */
+	KEY_F14,	/* 67 SONYPI_EVENT_PKEY_P5 */
+	KEY_F15,	/* 68 SONYPI_EVENT_SETTINGKEY_PRESSED */
+	KEY_VOLUMEUP,	/* 69 SONYPI_EVENT_VOLUME_INC_PRESSED */
+	KEY_VOLUMEDOWN,	/* 70 SONYPI_EVENT_VOLUME_DEC_PRESSED */
+	KEY_UNKNOWN,	/* 71 SONYPI_EVENT_BRIGHTNESS_PRESSED */
+	KEY_MEDIA,	/* 72 SONYPI_EVENT_MEDIA_PRESSED */
+	KEY_VENDOR,	/* 72 SONYPI_EVENT_VENDOR_PRESSED */
 };
 
 /* release buttons after a short delay if pressed */

@@ -376,22 +313,20 @@ static void sony_laptop_report_input_event(u8 event)
 		break;
 
 	default:
-		if (event >= ARRAY_SIZE(sony_laptop_input_index)) {
+		if (event >= ARRAY_SIZE(sony_laptop_input_keycode_map)) {
 			dprintk("sony_laptop_report_input_event, event not known: %d\n", event);
 			break;
 		}
-		if (sony_laptop_input_index[event] != -1) {
-			kp.key = sony_laptop_input_keycode_map[sony_laptop_input_index[event]];
-			if (kp.key != KEY_UNKNOWN)
-				kp.dev = key_dev;
-		}
+		kp.key = sony_laptop_input_keycode_map[event];
+		if (kp.key != KEY_UNKNOWN && kp.key != KEY_RESERVED)
+			kp.dev = key_dev;
 		break;
 	}
 
 	if (kp.dev) {
-		input_report_key(kp.dev, kp.key, 1);
 		/* we emit the scancode so we can always remap the key */
 		input_event(kp.dev, EV_MSC, MSC_SCAN, event);
+		input_report_key(kp.dev, kp.key, 1);
 		input_sync(kp.dev);
 
 		/* schedule key release */