PVR-2200 error with what I think is tuning
Hi there
You probably get this a lot, with the latest and greatest drivers from your git repository at Steve Tosh's website I get the following after a few days
[198934.085303] tda18271_write_regs: [4-0060|S] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [198934.085310] tda18271_init: [4-0060|S] error -5 on line 831 [198934.085317] tda18271_tune: [4-0060|S] error -5 on line 909 [198934.085324] tda18271_set_params: [4-0060|S] error -5 on line 994 [198934.085331] saa7164_cmd_send() No free sequences [198934.085336] saa7164_api_i2c_read() error, ret(1) = 0xc [198934.085341] tda10048_readreg: readreg error (ret == -5)
[198934.087195] tda10048_readreg: readreg error (ret == -5) [198934.087209] saa7164_cmd_send() No free sequences [198934.087214] saa7164_api_i2c_read() error, ret(1) = 0xc [198934.087220] tda10048_readreg: readreg error (ret == -5)
My tuning software is tvheadend (which I would prefer to keep)
I started to look at the sourcecode, but I know too little about I2C to make any sense of what might be bugging out
Is there anything I can do to avoid this ?
-- Greg
Quoted 20 lines · Greg Bowyer
Hi there
You probably get this a lot, with the latest and greatest drivers from your git repository at Steve Tosh's website I get the following after a few days
[198934.085303] tda18271_write_regs: [4-0060|S] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [198934.085310] tda18271_init: [4-0060|S] error -5 on line 831 [198934.085317] tda18271_tune: [4-0060|S] error -5 on line 909 [198934.085324] tda18271_set_params: [4-0060|S] error -5 on line 994 [198934.085331] saa7164_cmd_send() No free sequences [198934.085336] saa7164_api_i2c_read() error, ret(1) = 0xc [198934.085341] tda10048_readreg: readreg error (ret == -5)[198934.087195] tda10048_readreg: readreg error (ret == -5) [198934.087209] saa7164_cmd_send() No free sequences [198934.087214] saa7164_api_i2c_read() error, ret(1) = 0xc [198934.087220] tda10048_readreg: readreg error (ret == -5)
Quoted 6 lines
My tuning software is tvheadend (which I would prefer to keep)
I started to look at the sourcecode, but I know too little about I2C to make any sense of what might be bugging out
Is there anything I can do to avoid this ?
Just an FYI: that doesn't actually look like an i2c problem or some other problem with the tuner or demodulator. It looks like the saa7164 itself is wedged.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 23 lines · Devin Heitmueller
Quoted 22 lines · Greg Bowyer
Hi there
You probably get this a lot, with the latest and greatest drivers from your git repository at Steve Tosh's website I get the following after a few days
[198934.085303] tda18271_write_regs: [4-0060|S] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [198934.085310] tda18271_init: [4-0060|S] error -5 on line 831 [198934.085317] tda18271_tune: [4-0060|S] error -5 on line 909 [198934.085324] tda18271_set_params: [4-0060|S] error -5 on line 994 [198934.085331] saa7164_cmd_send() No free sequences [198934.085336] saa7164_api_i2c_read() error, ret(1) = 0xc [198934.085341] tda10048_readreg: readreg error (ret == -5)[198934.087195] tda10048_readreg: readreg error (ret == -5) [198934.087209] saa7164_cmd_send() No free sequences [198934.087214] saa7164_api_i2c_read() error, ret(1) = 0xc [198934.087220] tda10048_readreg: readreg error (ret == -5)My tuning software is tvheadend (which I would prefer to keep)
Quoted 7 lines
Quoted 4 lines
I started to look at the sourcecode, but I know too little about I2C to make any sense of what might be bugging out
Is there anything I can do to avoid this ?
Just an FYI: that doesn't actually look like an i2c problem or some other problem with the tuner or demodulator. It looks like the saa7164 itself is wedged.
... The driver or the chip itself ?, would it help if I posted the lspci -vv for the card ?
Quoted 2 lines
Devin