How best replace /etc/init.d files with debugging versions right before jffs2 file is generated?
Having some problems booting a rootfs generated by openembedded,
"hwclock can't find /dev/misc/rtc"
and I would like to emit some debug information by replacing some files in the /etc/init.d directory before the rootfs is finalized.
If I try to "install" from another package, I will get a conflict.
I guess I could loop mount the file system and then copy. Any other suggestions?
Signature · 2 lines
Best Regards Ulf Samuelsson
2011-10-29 15:52, Ulf Samuelsson skrev:
Quoted 4 lines
Having some problems booting a rootfs generated by openembedded,
"hwclock can't find
/dev/misc/rtc"
Quoted 8 lines
and I would like to emit some debug information by replacing some files in the
/etc/init.ddirectory before the rootfs is finalized.If I try to "install" from another package, I will get a conflict.
I guess I could loop mount the file system and then copy. Any other suggestions?
Just discovered that loop mounting jffs2 isn't that easy. Need to find the blkmtd driver somewhere, recompile kernel?
I can of course add some files to tmp/rootfs and regenerate the jffs2.
Other ideas (allowing automation) appreciated.
Signature · 2 lines
Best Regards Ulf Samuelsson
Quoted 8 lines · Ulf Samuelsson
2011-10-29 15:52, Ulf Samuelsson skrev:
Quoted 7 lines
Having some problems booting a rootfs generated by openembedded,
"hwclock can't find
/dev/misc/rtc"and I would like to emit some debug information by replacing some files in the
/etc/init.ddirectory before the rootfs is finalized.
Quoted 8 lines
Quoted 5 lines
If I try to "install" from another package, I will get a conflict.
I guess I could loop mount the file system and then copy. Any other suggestions?
Just discovered that loop mounting jffs2 isn't that easy. Need to find the blkmtd driver somewhere, recompile kernel?
Yes, loop mounting filesystems designed for raw flash requires quite some extra steps. It's generally doable, but...
Quoted 3 lines
I can of course add some files to tmp/rootfs and regenerate the jffs2.
Other ideas (allowing automation) appreciated.
Well, you could always use a bbappend to the recipe in question, and override/replace the files that way. Or, if it's just temporarily, just modify the scripts directly in the oe tree, or if the file is taken from a tarball, modify it in the build directory and force a re-install and packaging.
Cheers,
Anders
2011-10-29 17:00, Anders Darander skrev:
Quoted 22 lines · Ulf Samuelsson
Quoted 9 lines
2011-10-29 15:52, Ulf Samuelsson skrev:
Quoted 7 lines
Having some problems booting a rootfs generated by openembedded,
"hwclock can't find
/dev/misc/rtc"and I would like to emit some debug information by replacing some files in the
/etc/init.ddirectory before the rootfs is finalized.Quoted 7 lines
Quoted 5 lines
If I try to "install" from another package, I will get a conflict.
I guess I could loop mount the file system and then copy. Any other suggestions?
Just discovered that loop mounting jffs2 isn't that easy. Need to find the blkmtd driver somewhere, recompile kernel?
Yes, loop mounting filesystems designed for raw flash requires quite some extra steps. It's generally doable, but...
Quoted 3 lines
I can of course add some files to tmp/rootfs and regenerate the jffs2.
Other ideas (allowing automation) appreciated.
Quoted 8 lines
Well, you could always use a bbappend to the recipe in question, and override/replace the files that way. Or, if it's just temporarily, just modify the scripts directly in the oe tree, or if the file is taken from a tarball, modify it in the build directory and force a re-install and packaging.
Cheers,
Anders
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
One would think that it was possible to do something with the rootfs, just before the mkfs.jffs2 was started.
Key seems to be redefining "IMAGE_CMD_jffs2"
This is set in conf/bitbake.conf:IMAGE_CMD_jffs2 = "mkfs.jffs2 -x lzo --root=${IMAGE_ROOTFS} --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}"
It is possible to add something either in this file, or override in "local.conf"
PREPROCESS_JFFS2 = "tar -jxvf <myfile>.tar.bz2 -C ${IMAGE_ROOTFS}"
IMAGE_CMD_jffs2 = "${PREPROCESS_JFFS2} ; mkfs.jffs2 -x lzo --root=${IMAGE_ROOTFS} --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}"
If it is added to bitbake.conf, then PREPROCESS_JFFS2 needs to be set to something harmless. PREPROCESS_JFFS2 ?= "touch ${IMAGE_ROOTFS}"
BTW: Why not run sumtool on the final result? This should speed up the load.
----------------------------------------
This works for me without making a kludge of the openembedded tree.
Signature · 2 lines
Best Regards Ulf Samuelsson
Quoted 40 lines · Ulf Samuelsson
2011-10-29 17:00, Anders Darander skrev:
Quoted 22 lines · Ulf Samuelsson
Quoted 9 lines
2011-10-29 15:52, Ulf Samuelsson skrev:
Quoted 6 lines
Having some problems booting a rootfs generated by openembedded,
"hwclock can't find
/dev/misc/rtc"and I would like to emit some debug information by replacing some files in the
/etc/init.ddirectory before the rootfs is finalized.Quoted 7 lines
Quoted 4 lines
If I try to "install" from another package, I will get a conflict.
I guess I could loop mount the file system and then copy. Any other suggestions?
Just discovered that loop mounting jffs2 isn't that easy. Need to find the blkmtd driver somewhere, recompile kernel?
Yes, loop mounting filesystems designed for raw flash requires quite some extra steps. It's generally doable, but...
Quoted 3 lines
I can of course add some files to tmp/rootfs and regenerate the jffs2.
Other ideas (allowing automation) appreciated.
Quoted 8 lines
Well, you could always use a bbappend to the recipe in question, and override/replace the files that way. Or, if it's just temporarily, just modify the scripts directly in the oe tree, or if the file is taken from a tarball, modify it in the build directory and force a re-install and packaging.
Cheers,
Anders
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-develOne would think that it was possible to do something with the rootfs, just before the mkfs.jffs2 was started.
Key seems to be redefining "
IMAGE_CMD_jffs2"This is set in
conf/bitbake.conf:IMAGE_CMD_jffs2= "mkfs.jffs2 -x lzo --root=${IMAGE_ROOTFS} --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}"
Quoted 5 lines
It is possible to add something either in this file, or override in "local.conf"
PREPROCESS_JFFS2= "tar -jxvf <myfile>.tar.bz2 -C ${IMAGE_ROOTFS}"
Well, maybe IMAGE_PREPROCESS_COMMAND from image.bbclass could be used to do this? (I've not tested this myself, though).
You'll also have IMAGE_POSTPROCESS_COMMAND and MACHINE_POSTPROCESS_COMMAND being executed in that order. Although in your case, IMAGE_PREPROCESS_COMMAND should be the one to look at.
Cheers,
Anders
Quoted 7 lines
IMAGE_CMD_jffs2= "${PREPROCESS_JFFS2} ; mkfs.jffs2 -x lzo --root=${IMAGE_ROOTFS} --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}"If it is added to bitbake.conf, then
PREPROCESS_JFFS2needs to be set to something harmless.PREPROCESS_JFFS2?= "touch ${IMAGE_ROOTFS}"
Signature · 2 lines
Anders Darander ChargeStorm AB / eStorm AB
Quoted 11 lines · On Saturday 29 October 2011 14:52:29 Ulf Samuelsson wrote:
Having some problems booting a rootfs generated by openembedded,
"hwclock can't find
/dev/misc/rtc"and I would like to emit some debug information by replacing some files in the
/etc/init.ddirectory before the rootfs is finalized.If I try to "install" from another package, I will get a conflict.
I guess I could loop mount the file system and then copy. Any other suggestions?
Perhaps you could do this by appending to ROOTFS_POSTPROCESS_COMMAND within the image recipe?
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre