mx31: NAND_SPL boot question for TT-01

Hi (Stefano),

just a short question. I'd like to add NAND boot to the board
support of our TT-01.
I checked out the mx31pdk code and also found something in doc/README.SPL which does not seem to correspond.

Before I head into the wrong direction again, is the mx31pdk implementation still hip?

Thx, Helmut

--
Scanned by MailScanner.

Right. A lot of work was done recently, and now there is a common SPL framework in u-boot. The README.spl refers to the new stuff.

Before of that, booting from NAND was done in a different manner. This is what you find under board/freescale/mx31pdk. The mx31pdk is booting with the old mechanism.

New boards must implement the SPL according to the new framework, using CONFIG_SPL and setting the SPL configuration in the board configuration file. I am expecting

Stefano

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================