Skip to contentSkip to conversation

sky2 wol broken for Marvell 88E8053 rev 19

BUG Knut Petersen 1 participant 1 message Nov 2, 2011

lore
Share & tools
lore
#0 lore raw

WOL is broken on an AOpen i915GMm-hfs mobo with kernel 3.1.

lspci
===
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
Subsystem: AOPEN Inc. Marvell 88E8053 Gigabit Ethernet Controller (Aopen)
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at d0020000 (64-bit, non-prefetchable) [size=16K]
I/O ports at c000 [size=256]
[virtual] Expansion ROM at 80900000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [5c] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [e0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: sky2

03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
Subsystem: AOPEN Inc. Marvell 88E8053 Gigabit Ethernet Controller (Aopen)
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at d0120000 (64-bit, non-prefetchable) [size=16K]
I/O ports at d000 [size=256]
[virtual] Expansion ROM at 80600000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [5c] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [e0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: sky2

fix:
==

WOL does work with the following two changes:

diff original/drivers/net/sky2.c new/drivers/net/sky2.c 826a827

Quoted 1 line
      u32 reg1;

878a880,884

Quoted 5 lines
      /* Turn on legacy PCI-Express PME mode */
      reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
      reg1 |= PCI_Y2_PME_LEGACY;
      sky2_pci_write32(hw, PCI_DEV_REG1, reg1);

diff original/drivers/net/sky2.h new/drivers/net/sky2.h 374,375c374,375

<       Y2_HW_WOL_ON    = 1<<15,/* HW WOL On  (Yukon-EC Ultra A1 only) */
<       Y2_HW_WOL_OFF   = 1<<14,/* HW WOL On  (Yukon-EC Ultra A1 only) */

---

Quoted 2 lines
      Y2_HW_WOL_OFF   = 1<<15,/* HW WOL On  (Yukon-EC Ultra A1 only) */
      Y2_HW_WOL_ON    = 1<<14,/* HW WOL On  (Yukon-EC Ultra A1 only) */

The first change reverts commit 87b09f1f25cd1e01d7c50bf423c7fe33027d7511, both changes are based on suggestions found in the www.

WOL only works here if I apply both of them.

Some authors suggest fix 1, some suggested fix 2, I found no msg requesting to apply both. Several bugzilla references are still unreachable ;-(

So the big question is:
=================

Do those changes fix one system but break other systems?

cu,
Knut