ARM: NUC900: Add PCI driver support for NUC960

arch/arm/mach-w90x900/include/mach/regs-pci.h new file +3 -0

+#define NUC900_PCI_IO_BASE	0xE0000000
+#define NUC900_PCI_IO_END	0xE000FFFF
+#define NUC900_PCI_IO_SIZE	0x10000

arch/arm/mach-w90x900/pci.c new file +6 -0

+static struct resource pci_io = {
+	.name	= "NUC900 PCI IO",
+	.start	= NUC900_PCI_IO_BASE,
+	.end	= NUC900_PCI_IO_BASE + NUC900_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO,
+};

arch/arm/mach-w90x900/pci.c new file +41 -0

+			goto out;
+		}
+	} else {
+		printk(KERN_ERR "pci_versatile_setup:\
+						resources... nr == 0??\n");
+		goto out;
+	}
+	ret = 1;
+out:
+	return ret;
+}
+
+struct pci_bus *pci_nuc900_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(sys->busnr, &pci_nuc900_ops, sys);
+}
+
+void __init pci_nuc900_preinit(void)
+{
+	/* CK33 from PLL0 */
+	__raw_writel(__raw_readl(REG_CLKSEL) & ~EXTAL15M, REG_CLKSEL);
+	/* PCI CLOCK = 200/6 = 33Mhz */
+	 __raw_writel(((__raw_readl(REG_CLKDIV) &
+				(~(0xf<<4))) | CK33DIV5), REG_CLKDIV);
+
+	/* enable PCI clock */
+	__raw_writel(__raw_readl(REG_CLKEN) | 0x4, REG_CLKEN);
+
+	__raw_writel(RESET_VAL1, REG_PCICTR);
+
+	mdelay(100);
+
+	__raw_writel(RESET_VAL2, REG_PCICTR);
+
+	mdelay(200);
+}
+
+static inline int bridge_swizzle(int pin, unsigned int slot)
+{
+	return (pin + slot) & 3;
+}

Modify PCI driver for nuc960 per Russell's comments as following:
(1)Use the common PCI swizzle API.
(2)Use the pr_err insteading of prink.
(3)Request the IO resource in ioport_resource tree.

Signed-off-by Wan ZongShun <[email protected]>

---
 arch/arm/mach-w90x900/Kconfig                 |    1 +
 arch/arm/mach-w90x900/Makefile                |    3 +
 arch/arm/mach-w90x900/include/mach/map.h      |    4 +
 arch/arm/mach-w90x900/include/mach/regs-pci.h |   37 +++++
 arch/arm/mach-w90x900/nuc960.c                |    2 +
 arch/arm/mach-w90x900/pci.c                   |  195
+++++++++++++++++++++++++
 6 files changed, 242 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-w90x900/include/mach/regs-pci.h
 create mode 100644 arch/arm/mach-w90x900/pci.c

arch/arm/mach-w90x900/Kconfig +1 -0

index 69bab32..17be262 100644
@@ -41,6 +41,7 @@ menu "NUC960 Machines"
 config MACH_W90N960EVB
 	bool "Nuvoton NUC960 Evaluation Board"
 	select CPU_NUC960
+	select PCI
 	help
 	   Say Y here if you are using the Nuvoton NUC960EVB
 

(quoted diff) +0 -0

b/arch/arm/mach-w90x900/Makefile index 828c032..0c35800 100644

arch/arm/mach-w90x900/Makefile +3 -0

@@ -17,3 +17,6 @@ obj-$(CONFIG_CPU_NUC960)	+= nuc960.o
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
 obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
 obj-$(CONFIG_MACH_W90N960EVB)	+= mach-nuc960evb.o
+
+# Add pci support for nuc960, nuc920
+obj-$(CONFIG_PCI)		+= pci.o

arch/arm/mach-w90x900/include/mach/map.h +4 -0

index 1a20953..69f6c73 100644
@@ -154,4 +154,8 @@
 #define W90X900_PA_EMC		(0xB0003000)
 #define W90X900_SZ_EMC		SZ_4K
 
+/* PCI interface controller */
+#define	W90X900_VA_PCI		W90X900_ADDR(0x00002000)
+#define	W90X900_PA_PCI		(0xB0002000)
+#define	W90X900_SZ_PCI		SZ_4K
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-w90x900/include/mach/regs-pci.h new file +37 -0

new file mode 100644
index 0000000..d1975eb
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-pci.h
+ *
+ * Copyright (c) 2011 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_PCI_H
+#define __ASM_ARCH_REGS_PCI_H
+
+#define PCI_BA    W90X900_VA_PCI /* PCI Control */
+/* PCI Control Registers */
+#define REG_PCICTR		(PCI_BA + 0x000)
+#define REG_PCISTR		(PCI_BA + 0x004)
+#define REG_PCILATIMER		(PCI_BA + 0x008)
+#define REG_PCIINTEN		(PCI_BA + 0x010)
+#define REG_PCIINT		(PCI_BA + 0x014)
+#define REG_CFGADDR		(PCI_BA + 0x020)
+#define REG_CFGDATA		(PCI_BA + 0x024)
+#define REG_PCIARB		(PCI_BA + 0x04C)
+#define REG_PCIBIST		(PCI_BA + 0x050)
+
+#define NUC900_PCI_IO_BASE	0xE0000000
+#define NUC900_PCI_IO_END	0xE000FFFF
+#define NUC900_PCI_IO_SIZE	0x10000
+
+#define NUC900_PCI_MEM_BASE	0xC0000000
+#define NUC900_PCI_MEM_END	0xDFFFEFFFF
+#define NUC900_PCI_MEM_SIZE	0x20000000
+
+#endif /* ___ASM_ARCH_REGS_PCI_H */

(quoted diff) +0 -0

b/arch/arm/mach-w90x900/nuc960.c index 8851a3a..0212964 100644

arch/arm/mach-w90x900/nuc960.c +1 -0

@@ -19,6 +19,7 @@
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include "cpu.h"
+#include "clock.h"
 
 /* define specific CPU platform device */
 

@@ -30,6 +31,7 @@ static struct platform_device *nuc960_dev[] __initdata =

{ /* define specific CPU platform io map */

static struct map_desc nuc960evb_iodesc[] __initdata = {

arch/arm/mach-w90x900/nuc960.c +1 -0

+	IODESC_ENT(PCI),
 };
 
 /*Init NUC960 evb io*/

arch/arm/mach-w90x900/pci.c new file +41 -0

new file mode 100644
index 0000000..74095b0
@@ -0,0 +1,195 @@
+/*
+ * linux/arch/arm/mach-w90x900/pci.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+
+#include <mach/regs-pci.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gcr.h>
+
+#define EXTAL15M	(0x03 << 2)
+#define CK33DIV5	(0x05 << 4)
+#define RESET_VAL1	0x20C0
+#define RESET_VAL2	0x20CF
+
+static int nuc900_read_config(struct pci_bus *bus, unsigned int devfn,
+				int where,  int size, unsigned int  *val)
+{
+	unsigned int v;
+

arch/arm/mach-w90x900/pci.c new file +55 -0

+		*val = v;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int nuc900_write_config(struct pci_bus *bus, unsigned int devfn,
+					int where, int size, unsigned int val)
+{
+	unsigned int v;
+
+	__raw_writel(devfn * 0x100 + where, REG_CFGADDR);
+
+	v = __raw_readl(REG_CFGDATA);
+
+	__raw_writel(devfn * 0x100 + where, REG_CFGADDR);
+
+	switch (size) {
+	case 1:
+		v &= ~(0xff << (where % 4) * 8);
+		v |= (val << (where % 4) * 8);
+		__raw_writel(val, REG_CFGDATA);
+		break;
+	case 2:
+		v &= ~(0xffff << (where % 4) * 8);
+		v |= (val << (where % 4) * 8);
+		__raw_writel(val, REG_CFGDATA);
+		break;
+	case 4:
+		__raw_writel(val, REG_CFGDATA);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_nuc900_ops = {
+	.read	= nuc900_read_config,
+	.write	= nuc900_write_config,
+};
+
+static struct resource pci_io = {
+	.name	= "NUC900 PCI IO",
+	.start	= NUC900_PCI_IO_BASE,
+	.end	= NUC900_PCI_IO_BASE + NUC900_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pci_mem = {
+	.name	= "nuc900 PCI Memory",
+	.start	= NUC900_PCI_MEM_BASE,
+	.end	= NUC900_PCI_MEM_BASE + NUC900_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};

arch/arm/mach-w90x900/pci.c new file +19 -0

+	ret = request_resource(&iomem_resource, &pci_mem);
+	if (ret) {
+		pr_err("%s: failed to request resources: %d\n", __func__, ret);
+		goto release_io_mem;
+	}
+
+	/*
+	 * bus->resource[0] is the IO resource for this bus
+	 * bus->resource[1] is the mem resource for this bus
+	 * bus->resource[2] is the prefetch mem resource for this bus
+	 */
+	resource[0] = &pci_io;
+	resource[1] = &pci_mem;
+	resource[2] = NULL;
+
+	goto out;
+
+ release_io_mem:
+	release_resource(&pci_io);

arch/arm/mach-w90x900/pci.c new file +15 -0

+
+	sys->mem_offset = 0;
+	sys->io_offset = 0;
+	ret = pci_nuc900_setup_resources(sys->resource);
+	if (ret)
+		pr_err("%s: failed to setup resources: %d\n", __func__, ret);
+
+	return !ret;
+}
+
+struct pci_bus *pci_nuc900_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(sys->busnr, &pci_nuc900_ops, sys);
+}
+

arch/arm/mach-w90x900/pci.c new file +15 -0

+
+	__raw_writel(RESET_VAL1, REG_PCICTR);
+
+	mdelay(100);
+
+	__raw_writel(RESET_VAL2, REG_PCICTR);
+
+	mdelay(200);
+}
+
+static struct hw_pci nuc900_pci __initdata = {
+	.swizzle		= pci_std_swizzle,
+	.setup			= pci_nuc900_setup,
+	.nr_controllers		= 1,
+	.scan			= pci_nuc900_scan_bus,

arch/arm/mach-w90x900/include/mach/regs-pci.h new file +3 -0

+#define NUC900_PCI_IO_BASE	0xE0000000
+#define NUC900_PCI_IO_END	0xE000FFFF
+#define NUC900_PCI_IO_SIZE	0x10000

arch/arm/mach-w90x900/pci.c new file +6 -0

+static struct resource pci_io = {
+	.name	= "NUC900 PCI IO",
+	.start	= NUC900_PCI_IO_BASE,
+	.end	= NUC900_PCI_IO_BASE + NUC900_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO,
+};

arch/arm/mach-w90x900/pci.c new file +9 -0

+static int __init pci_nuc900_setup_resources(struct resource **resource)
+{
+	int ret = 0;
+
+	ret = request_resource(&ioport_resource, &pci_io);
+	if (ret) {
+		pr_err("%s: failed to request resources: %d\n", __func__, ret);
+		goto out;
+	}

arch/arm/mach-w90x900/include/mach/regs-pci.h new file +1 -0

new file mode 100644
index 0000000..d1975eb
@@ -0,0 +1,37 @@
 
+#define PCI_BA    W90X900_VA_PCI /* PCI Control */

arch/arm/mach-w90x900/nuc960.c +1 -0

index 8851a3a..0212964 100644
@@ -19,6 +19,7 @@
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include "cpu.h"
+#include "clock.h"
 
 /* define specific CPU platform device */