Skip to contentSkip to conversation

dmix issue when used with hot-plugged devices

PATCH Arnaud Mouiche 1 participant 1 message Nov 18, 2011

lore
Share & tools
lore
#0 lore raw

Hi all,

I'm using USB audio devices with dmix.
I notice that the system can lock when the device gets unplugged.

ex:

     $ aplay -D "dmix device on top of usb device" -f S16_LE /dev/zero
     now   unplug the USB device, and aplay is now waiting forever.

Two root causes of the problem in alsa-lib, with some proposed patch (I'm not able to upgrade to upstream, but I didn't see any change which can fix my issue)

A) the sound timer used by dmix doesn't get the notification when the card was removed. so the poll done to wait is locking
here is a patch to solve this:

________________________________________________________________________
commit 2ac49899d6a45ef594a99ad409a378119f0fa157

Author: Arnaud Mouiche <[email protected]>
Date:   Fri Nov 18 15:03:29 2011 +0100

timer: use SND_TIMER_EVENT_MSTOP as interesting filter for timers,
otherwise we
miss the event when the hotplug device is removed and we set a
timer of it

src/pcm/pcm_direct.c +0 -0
index 88609e5..c38da70 100644
@@ -1137,6 +1137,7 @@ int 

snd_pcm_direct_initialize_poll_fd(snd_pcm_direct_t *dmix)

         dmix->timer_events = (1<<SND_TIMER_EVENT_MSUSPEND) |
                              (1<<SND_TIMER_EVENT_MRESUME) |
+                            (1<<SND_TIMER_EVENT_MSTOP) |
                              (1<<SND_TIMER_EVENT_STOP);

         /*

________________________________________________________________________

B) when snd_pcm_direct_poll_revents() check for snd_pcm_state(dmix->spcm), it doesn't care about negative values so it just consider POLLERR should not be set, and on return, we can be sure to poll again

I see 2 issues here:
1)how can snd_pcm_state returns negatives values
(simply consider that for gcc, "if (snd_pcm_state() < 0)" can't be false
So may be "snd_pcm_state" should check for negative values, and return an associated ALSA_state (like SND_PCM_STATE_DISCONNECTED)

2) POLLERR, at least, should be set for negative values:

here is the patch for the second:

________________________________________________________________________
commit 4463226b9e14e17e84492c5d59c0920876b614c0

Author: Arnaud Mouiche <[email protected]>
Date:   Fri Nov 18 15:00:36 2011 +0100

snd_pcm_direct_poll_revents set POLLERR is the snd_pcm_state result
is invalid

this happened for example when the real pcm device (in case of
dmix) has been

     removed. snd_pcm_state(dmix->spcm) returns -ENODEV
src/pcm/pcm_direct.c +0 -0
index 0a9047d..227602f 100644
@@ -548,6 +548,7 @@ int snd_pcm_direct_poll_revents(snd_pcm_t *pcm, 

struct pollfd *pfds, unsigned in

      snd_pcm_direct_t *dmix = pcm->private_data;
      unsigned short events;
      int empty = 0;

+ int state;

      assert(pfds && nfds == 1 && revents);
      events = pfds[0].revents;
@@ -563,28 +564,33 @@ int snd_pcm_direct_poll_revents(snd_pcm_t *pcm, 
struct pollfd *pfds, unsigned in
          }
          empty = avail < pcm->avail_min;
      }
-    switch (snd_pcm_state(dmix->spcm)) {
-    case SND_PCM_STATE_XRUN:
-    case SND_PCM_STATE_SUSPENDED:
-    case SND_PCM_STATE_SETUP:
+    state = snd_pcm_state(dmix->spcm);
+    if (((int) state) < 0) {
          events |= POLLERR;
-        break;
-    default:
-        if (empty) {
-            snd_pcm_direct_clear_timer_queue(dmix);
-            events &= ~(POLLOUT|POLLIN);
-            /* additional check */
-            switch (snd_pcm_state(pcm)) {
-            case SND_PCM_STATE_XRUN:
-            case SND_PCM_STATE_SUSPENDED:
-            case SND_PCM_STATE_SETUP:

- events |= POLLERR;
- break;
- default:
- break;
+ } else {

+        switch (state) {
+        case SND_PCM_STATE_XRUN:
+        case SND_PCM_STATE_SUSPENDED:
+        case SND_PCM_STATE_SETUP:

+ events |= POLLERR;
+ break;
+ default:
+ if (empty) {

+                snd_pcm_direct_clear_timer_queue(dmix);
+                events &= ~(POLLOUT | POLLIN);
+                /* additional check */
+                switch (snd_pcm_state(pcm)) {
+                case SND_PCM_STATE_XRUN:
+                case SND_PCM_STATE_SUSPENDED:
+                case SND_PCM_STATE_SETUP:

+ events |= POLLERR;
+ break;
+ default:
+ break;
+ }

              }
+            break;
          }
-        break;
      }
      *revents = events;
      return 0;