Skip to contentSkip to conversation

Kernel: snd-usb-audio: probe of 2-2:1.0 failed with error -5

DISCUSSION Linus Torvalds 4 participants 6 messages Nov 29, 2011 – Nov 30, 2011 1 message not in the archive Sound

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 8 lines · Nixbits Admin

While knowing that your time is precious and without wanting to making you spend more than what you may be able to spare for my problem; i would like ask you if you could take a look at this issue.

https://forums.gentoo.org/viewtopic-p-6885908.html#6885908

snd-usb-audio: probe of 2-2:1.0 failed with error -5

This is related to the line above it:

  Nov 29 07:21:21  kernel: skipping empty audio interface (v1)
  Nov 29 07:21:21  kernel: snd-usb-audio: probe of 2-3:1.0 failed with error -5

which in turn is because of a zero "bInCollection" value in the device control header. I'm adding some sound people to the cc, in case anybody has more clues about what's wrong with that particular device
- I don't personally have any real clue about usb audio.

As to your UHCI/EHCI confusion - it's actually a USB confusion. EHCI was done as a add-on to UHCI (or OHCI), to the point where there is both a UHCI *and* an EHCI controller involved (on the same silicon) and they have this odd hand-over thing where one part (the UHCI part) handles legacy devices, and then the new bolted-on EHCI part handles the full USB-2.0 functionality.

So the UHCI/EHCI confusion is deep in the silicon itself. If you attach a usb-1.1 device, it will be handed off to the UHCI part, if you attach a 2.0 device it will be handled by the EHCI part of the controller. Oh the wonders of crazy backwards compatibility hacks..

Linus

#2 lore raw
Quoted 12 lines · Linus Torvalds
Quoted 8 lines · Nixbits Admin

While knowing that your time is precious and without wanting to making you spend more than what you may be able to spare for my problem; i would like ask you if you could take a look at this issue.

https://forums.gentoo.org/viewtopic-p-6885908.html#6885908

snd-usb-audio: probe of 2-2:1.0 failed with error -5

This is related to the line above it:

Quoted 7 lines
  Nov 29 07:21:21  kernel: skipping empty audio interface (v1)
  Nov 29 07:21:21  kernel: snd-usb-audio: probe of 2-3:1.0 failed with error -5

which in turn is because of a zero "bInCollection" value in the device control header. I'm adding some sound people to the cc, in case anybody has more clues about what's wrong with that particular device
- I don't personally have any real clue about usb audio.

As the dump in the forum post doesn't decode any of the USB audio specific headers, we'd need to see the output of "lsusb -v" with that device connected.

If the driver bails out at this point, there's something wrong with the descriptors, or the interface has no audio support at all (which would be odd as it could have been omitted entirely in the first place).

We might have to add a quirk for the device, let's see.

Daniel

#3 lore raw
Quoted 4 lines · Daniel Mack
Quoted 3 lines · Linus Torvalds
Quoted 1 line · Nixbits Admin

https://forums.gentoo.org/viewtopic-p-6885908.html#6885908

Quoted 8 lines
Quoted 2 lines
  Nov 29 07:21:21  kernel: skipping empty audio interface (v1)
  Nov 29 07:21:21  kernel: snd-usb-audio: probe of 2-3:1.0 failed with error -5

If the driver bails out at this point, there's something wrong with the descriptors, or the interface has no audio support at all (which would be odd as it could have been omitted entirely in the first place).

We might have to add a quirk for the device, let's see.

Actually, this error message could be prevented by removing the quirk that is already there.

That quirk does nothing more than providing a nice user-visible name for the device. In doing so, it uses the USB_DEVICE macro, which makes the USB core trying to attach it to all interfaces, including the video ones. Because of all the crap descriptors out there, the audio driver trusts the quirk, is not fazed by an interface not labeled as "audio", and happily begins to parse the interface's descriptors.

The quirk should just be restricted to the audio interfaces (like all the other Logitech quirks).

N.A., please try the patch below.

Regards,
Clemens

sound/usb/quirks-table.h +7 -1
@@ -157,7 +157,13 @@
 	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
 },
 {
-	USB_DEVICE(0x046d, 0x0990),
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+	.idVendor = 0x046d,
+	.idProduct = 0x0990,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.vendor_name = "Logitech, Inc.",
 		.product_name = "QuickCam Pro 9000",
#4 lore raw
Quoted 2 lines · Clemens Ladisch

N.A., please try the patch below.

I don't think that will compile. At a minimum, there's a missing comma there, afaik.

Linus

#5 lore raw
Quoted 5 lines · Linus Torvalds
Quoted 1 line · Clemens Ladisch

N.A., please try the patch below.

I don't think that will compile. At a minimum, there's a missing comma there, afaik.

Oops, indeed. Now compile-tested:

sound/usb/quirks-table.h +7 -1
@@ -157,7 +157,13 @@
 	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
 },
 {
-	USB_DEVICE(0x046d, 0x0990),
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+	.idVendor = 0x046d,
+	.idProduct = 0x0990,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.vendor_name = "Logitech, Inc.",
 		.product_name = "QuickCam Pro 9000",
#6 lore raw
In reply to Daniel Mack

I have included the output of lsusb -v and updated the topic.

https://forums.gentoo.org/viewtopic-p-6886404.html#6886404

Quoted 2 lines
Quoted 2 lines
   Nov 29 07:21:21  kernel: skipping empty audio interface (v1)
   Nov 29 07:21:21  kernel: snd-usb-audio: probe of 2-3:1.0 failed 

with error -5

H.

Quoted 34 lines · Daniel Mack
Quoted 12 lines · Linus Torvalds
Quoted 8 lines · Nixbits Admin

While knowing that your time is precious and without wanting to making you spend more than what you may be able to spare for my problem; i would like ask you if you could take a look at this issue.

https://forums.gentoo.org/viewtopic-p-6885908.html#6885908

snd-usb-audio: probe of 2-2:1.0 failed with error -5

This is related to the line above it:

Quoted 7 lines
   Nov 29 07:21:21  kernel: skipping empty audio interface (v1)
   Nov 29 07:21:21  kernel: snd-usb-audio: probe of 2-3:1.0 failed with error -5

which in turn is because of a zero "bInCollection" value in the device control header. I'm adding some sound people to the cc, in case anybody has more clues about what's wrong with that particular device
- I don't personally have any real clue about usb audio.

As the dump in the forum post doesn't decode any of the USB audio specific headers, we'd need to see the output of "lsusb -v" with that device connected.

If the driver bails out at this point, there's something wrong with the descriptors, or the interface has no audio support at all (which would be odd as it could have been omitted entirely in the first place).

We might have to add a quirk for the device, let's see.

Daniel