Pull request: u-boot-imx

Hi Albert,

please pull from u-boot-imx (this time rebased on u-boot-arm/master..)

The following changes since commit d4870a914b73884f2f3e8fb082ae50f75fc01ebc:

arm, arm926ejs: Fix clear bss loop for zero length bss (2011-12-05
18:03:51 +0100)

are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master

Fabio Estevam (5):
mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
mx51evk: Configure the pins as GPIOs prior to using gpio_get_value

Marek Vasut (3):
MC13892: Add REGMODE0 bits definitions
Efika: Configure additional regulators for HDMI output
MXS: Add static annotations to dma driver

Robert Deli?n (1):
M28: Fix OB1 bug in GPIO driver

Simon Glass (1):
mx5: Correct a warning in clock.c

Stefano Babic (2):
MX: serial_mxc: cleanup removing nasty #ifdef
MX35: flea3: changes due to hardware revision B

Wolfram Sang (1):
apbh_dma: return error value on timeout

 arch/arm/cpu/arm1136/mx31/devices.c       |    4 -
 arch/arm/cpu/armv7/mx5/clock.c            |    2 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h |   10 +-
 arch/arm/include/asm/arch-mx27/imx-regs.h |    8 +-
 arch/arm/include/asm/arch-mx28/dma.h      |   25 ----
 arch/arm/include/asm/arch-mx31/imx-regs.h |    6 +
 arch/arm/include/asm/arch-mx35/imx-regs.h |    6 +-
 arch/arm/include/asm/arch-mx5/imx-regs.h  |    6 +-
 board/CarMediaLab/flea3/flea3.c           |    4 +-
 board/efikamx/efikamx.c                   |   15 ++-
 board/freescale/mx51evk/mx51evk.c         |    3 +
 board/freescale/mx53ard/mx53ard.c         |    3 +
 board/freescale/mx53evk/mx53evk.c         |    3 +
 board/freescale/mx53loco/mx53loco.c       |    3 +
 board/freescale/mx53smd/mx53smd.c         |    1 +
 drivers/dma/apbh_dma.c                    |  211
+++++++----------------------
 drivers/gpio/mxs_gpio.c                   |    2 +-
 drivers/serial/serial_mxc.c               |   37 +-----
 include/configs/efikamx.h                 |    2 +-
 include/configs/flea3.h                   |   22 ++--
 include/configs/imx27lite-common.h        |    2 +-
 include/configs/imx31_litekit.h           |    4 +-
 include/configs/imx31_phycore.h           |    2 +-
 include/configs/mx25pdk.h                 |    2 +-
 include/configs/mx31ads.h                 |    4 +-
 include/configs/mx31pdk.h                 |    2 +-
 include/configs/mx35pdk.h                 |    2 +-
 include/configs/mx51evk.h                 |    2 +-
 include/configs/mx53ard.h                 |    2 +-
 include/configs/mx53evk.h                 |    2 +-
 include/configs/mx53loco.h                |    2 +-
 include/configs/mx53smd.h                 |    2 +-
 include/configs/qong.h                    |    4 +-
 include/configs/tt01.h                    |    2 +-
 include/configs/tx25.h                    |    2 +-
 include/configs/vision2.h                 |    2 +-
 include/configs/zmx25.h                   |    2 +-
 include/mc13892.h                         |   16 +++
 38 files changed, 153 insertions(+), 276 deletions(-)

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

Hi Stefano,

Le 05/12/2011 18:22, Stefano Babic a ?crit :

Applied tu u-boot-arm/master, thanks!

Amicalement,

Albert.