Pull request: u-boot-imx

Hi Albert,

please pull from u-boot-imx. It is rebased on u-boot mainline, because Wolfgang has already merged your u-boot-arm/master + some fixes.

The following changes since commit d82a27bc5c404da907f71960a3ed2e148ac73fd0:

drivers/net/inca-ip_sw.c: Fix GCC 4.6 build warning (2011-12-08
21:01:19 +0100)

are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master

Jason Liu (4):
i.mx: introduce the armv7/imx-common folder
i.mx: add the initial support for freescale i.MX6Q processor i.mx: mxc_gpio: add the i.mx6q support
i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board

Marek Vasut (4):
M28: Document that units has to be set to sectors on SD bootcard
M28: Fix typo
i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
M28: Cleanup memsize.o OOT build

 MAINTAINERS                                        |    1 +
 Makefile                                           |    8 +
 arch/arm/cpu/arm926ejs/mx28/Makefile               |    4 +
 .../arm/cpu/arm926ejs/mx28/mx28_init.h             |    0
 arch/arm/cpu/arm926ejs/mx28/spl_boot.c             |   78 +
 .../arm/cpu/arm926ejs/mx28/spl_mem_init.c          |    2 +-
 .../arm/cpu/arm926ejs/mx28/spl_power_init.c        |    2 +-
 .../m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S |    0
 .../arm/cpu/arm926ejs/mx28}/u-boot-spl.lds         |   14 +-
 arch/arm/cpu/armv7/imx-common/Makefile             |   47 +
 arch/arm/cpu/armv7/imx-common/cpu.c                |  108 ++
 arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c     |    0
 arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c     |   17 +-
 arch/arm/cpu/armv7/mx5/Makefile                    |    2 +-
 arch/arm/cpu/armv7/mx5/soc.c                       |   77 -
 arch/arm/cpu/armv7/mx6/lowlevel_init.S             |   24 +
 arch/arm/cpu/armv7/mx6/soc.c                       |   82 +
 arch/arm/include/asm/arch-mx28/sys_proto.h         |    6 +
 arch/arm/include/asm/arch-mx6/ccm_regs.h           |  892 +++++++++++
 arch/arm/include/asm/arch-mx6/clock.h              |   50 +
 arch/arm/include/asm/arch-mx6/gpio.h               |   35 +
 arch/arm/include/asm/arch-mx6/imx-regs.h           |  236 +++
 arch/arm/include/asm/arch-mx6/iomux-v3.h           |  103 ++
 arch/arm/include/asm/arch-mx6/mx6x_pins.h          | 1683
++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h          |   38 +
 board/denx/m28evk/Makefile                         |   11 +-
 board/denx/m28evk/m28evk.c                         |    2 +-
 board/denx/m28evk/{mmc_boot.c => spl_boot.c}       |   61 +-
 board/freescale/mx6qarm2/Makefile                  |   42 +
 board/freescale/mx6qarm2/imximage.cfg              |  167 ++
 board/freescale/mx6qarm2/mx6qarm2.c                |  155 ++
 boards.cfg                                         |    1 +
 doc/README.m28                                     |    3 +-
 drivers/gpio/mxc_gpio.c                            |    4 +-
 include/configs/m28evk.h                           |    6 +-
 include/configs/mx6qarm2.h                         |  162 ++
 39 files changed, 4441 insertions(+), 167 deletions(-)
 rename board/denx/m28evk/m28_init.h =>
arch/arm/cpu/arm926ejs/mx28/mx28_init.h (100%)
 create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_boot.c
 rename board/denx/m28evk/mem_init.c =>
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c (99%)
 rename board/denx/m28evk/power_init.c =>
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c (99%)
 rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S (100%)
 rename {board/denx/m28evk =>
arch/arm/cpu/arm926ejs/mx28}/u-boot-spl.lds (93%)
 create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
 create mode 100644 arch/arm/cpu/armv7/imx-common/cpu.c
 rename arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
 rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
 mode change 100644 => 100755
 create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
 create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
 create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
 create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
 create mode 100644 arch/arm/cpu/armv7/mx6/soc.c
 create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
 create mode 100644 arch/arm/include/asm/arch-mx6/clock.h
 create mode 100644 arch/arm/include/asm/arch-mx6/gpio.h
 create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
 create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
 create mode 100644 arch/arm/include/asm/arch-mx6/sys_proto.h
 rename board/denx/m28evk/{mmc_boot.c => spl_boot.c} (87%)
 create mode 100644 board/freescale/mx6qarm2/Makefile
 create mode 100644 board/freescale/mx6qarm2/imximage.cfg
 create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
 create mode 100644 include/configs/mx6qarm2.h

Best regards,
Stefano

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

Hi Stefano,

Le 09/12/2011 15:34, Stefano Babic a ?crit :

Applied to u-boot-arm/master, thanks.

Amicalement,

Albert.