Skip to contentSkip to conversation

Surround via SPDIF with ALSA/emu10k1?

DISCUSSION Robert Hancock 1 participant 1 message Aug 23, 2005 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 5 lines · Thomas Zehetbauer

Now I can either enable the 'SB Live Analog/Digital Output Jack' switch and use the SPDIF connector to my DD5.1 surround system OR mute this control and access/unmute the rear/center/LFE channels. Using analog cabling is not an option as the DTT2500 has no connector for the center/LFE channels.

If the speaker system has no analog input for those channels, then there is no way to play back content through them unless it is Dolby Digital encoded. (There's no way to put more than 2-channel audio through SPDIF unless it's encoded such as by Dolby Digital or DTS.) The sound card is not capable of doing this, so if the content is not Dolby Digital already, this would have to be handled by some software.

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/