linux intel and xorg status on i915GM hardware
Some comments related to linux and xorg git master on an AOpen i915GMm-hfs:
1: Xorg.0.log is full of (besides timestamp) identical EDID entries:
==================================================
[ 2502.358] (II) intel(0): EDID vendor "ENC", prod id 5769 [ 2502.358] (II) intel(0): Using EDID range info for horizontal sync [ 2502.358] (II) intel(0): Using EDID range info for vertical refresh [ 2502.358] (II) intel(0): Printing DDC gathered Modelines: [ 2502.358] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 2502.358] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 2502.358] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 2502.358] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 2502.358] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
The following bash script calculates the seconds between logged EDID reads:
y=0;
cat git/X11/var/log/Xorg.0.log | \
grep "EDID vendor" | \
sed -e "s/\[\ //" -e "s/\.[[:print:]]*//" | \
while read x; do \
if [ $y -ne 0 ]; then \
echo -n "$[$x-$y] "; \
fi; \
y=$x; \
done;
echo
Output of the script:
1048 31 101 629 243 11 253 1613 72 30 254 782 122 487 375 213 295 537 396 81 152 213 264 142 1 1 69 355 2313 203 132 1136 527 213 467 101 102 385 11 172 10 1146 406 406 203 132 426 507 1390 1 1 1063 2820 2850 2 1 667 213 588 1309 710 304 1867 1349 700 1501 507 447 274 182 609 984 771 1562 1675
No, no monitor has been connected or disconnected ... I do not see any pattern.
2. https://bugs.freedesktop.org/show_bug.cgi?id=42300 has not been resolved
============================================================
3. evdev: keyboard led problem, see http://lists.x.org/archives/xorg-devel/2012-January/028374.html
============================================================================
4. kernel: Polling occasionally distorts the framebuffer console
===============================================
_Very_ old bug, but "echo N > /sys/module/drm_kms_helper/parameters/poll" helps.
5. Xorg fails to start without a manually created "Section Modules" in config
=========================================================
see: https://bugs.freedesktop.org/show_bug.cgi?id=41208
6. "Thank you" to opensuse:
=====================
11.3 has the last reliable Xorg version for my hardware, 11.4 crashes/locks and 12.1 has render problems ... a good way to increase the number of people that use and test the git master tree ;-))
cu,
-knut
_______________________________________________
[email protected]: X.Org development
Archives: http://lists.x.org/archives/xorg-devel
Info: http://lists.x.org/mailman/listinfo/xorg-devel
Quoted 3 lines · Knut Petersen
2. https://bugs.freedesktop.org/**show_bug.cgi?id=42300<https://bugs.freedesktop.org/show_bug.cgi?id=42300>has not been resolved
I believe Keith will queue the fix for this (which is the same as for
https://bugs.freedesktop.org/show_bug.cgi?id=41059 apparently) shortly.
Signature · 2 lines
Eugeni Dodonov <http://eugeni.dodonov.net/>
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi,
Quoted 6 lines · Knut Petersen
Some comments related to linux and xorg git master on an AOpen i915GMm-hfs:
1: Xorg.0.log is full of (besides timestamp) identical EDID entries:
==================================================
[...]
Quoted 6 lines
The following bash script calculates the seconds between logged EDID reads:
[...]
No, no monitor has been connected or disconnected ... I do not see any pattern.
X clients can (and do) force EDID reprobing; the server doesn't automatically reprobe of its own volition.
Cheers,
Daniel
_______________________________________________
[email protected]: X.Org development
Archives: http://lists.x.org/archives/xorg-devel
Info: http://lists.x.org/mailman/listinfo/xorg-devel
Quoted 16 lines · Knut Petersen
1: Xorg.0.log is full of (besides timestamp) identical EDID entries:
==================================================[ 2502.358] (II) intel(0): EDID vendor "ENC", prod id 5769 [ 2502.358] (II) intel(0): Using EDID range info for horizontal sync [ 2502.358] (II) intel(0): Using EDID range info for vertical refresh [ 2502.358] (II) intel(0): Printing DDC gathered Modelines: [ 2502.358] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 2502.358] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 2502.358] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 2502.358] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 2502.358] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
Quoted 1 line
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
Does this happen with no X apps running, just a naked X server? If so you have something causing spurious hotplug interrupts. If not, something in your session is querying the server a lot.
I believe gnome attempts to isolate calls to XRRGetScreenResources to gnome-settings-daemon for precisely this reason (only one app really needs to call it and the rest should query through the session bus).
Quoted 4 lines
5. Xorg fails to start without a manually created "Section Modules" in config
=========================================================
see: https://bugs.freedesktop.org/show_bug.cgi?id=41208
You really do have a toolchain bug there.
- ajax
_______________________________________________
[email protected]: X.Org development
Archives: http://lists.x.org/archives/xorg-devel
Info: http://lists.x.org/mailman/listinfo/xorg-devel