Skip to contentSkip to conversation

Hauppauge HVR-930C

DISCUSSION Benjamin Larsson 2 participants 2 messages Jan 25, 2012 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

I tried a daily snapshot (2011-01-24) with this stick. And I'm getting these kind of errors in the log:

[43665.769571] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43665.769857] drxk: 02 00 00 00 10 00 07 00 03 02                    ..........
[43686.121576] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43686.121861] drxk: 02 00 00 00 10 00 05 00 03 02                    ..........
[43706.465578] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43706.465861] drxk: 02 00 00 00 10 00 05 00 03 02                    ..........
[43709.669571] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43709.669850] drxk: 02 00 00 00 10 00 05 00 03 02                    ..........

First I tried the driver with the firmware that is downloaded with the get_firmware script. The adapter and frontends was registered properly but I did not get any TS from the stick. I then renamed the firmware file and the driver complained about missing firmware but stick started working anyway. So the drxk in my version of the card has a rom with microcode in it.

So things that would be nice to have is:

A log output that the drxk actually loaded the firmware file. Right now there is only log output when there is no firmware file detected. Maybe add a log that the card might work without the drxk firmware.
Silence the SCU_RESULT_INVPAR debug output by default or find out what is causing the error messages.

MvH
Benjamin Larsson

#1 lore raw

Em 25-01-2012 10:06, Benjamin Larsson escreveu:

Quoted 10 lines

I tried a daily snapshot (2011-01-24) with this stick. And I'm getting these kind of errors in the log:

[43665.769571] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43665.769857] drxk: 02 00 00 00 10 00 07 00 03 02                    ..........
[43686.121576] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43686.121861] drxk: 02 00 00 00 10 00 05 00 03 02                    ..........
[43706.465578] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43706.465861] drxk: 02 00 00 00 10 00 05 00 03 02                    ..........
[43709.669571] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
[43709.669850] drxk: 02 00 00 00 10 00 05 00 03 02                    ..........

This is just due to firmware differences. Yeah, a cleanup on these is needed.

Quoted 5 lines

First I tried the driver with the firmware that is downloaded with the get_firmware script. The adapter and frontends was registered properly but I did not get any TS from the stick. I then renamed the firmware file and the driver complained about missing firmware but stick started working anyway. So the drxk in my version of the card has a rom with microcode in it.

This is not uncommon. The uploaded firmware should be, in thesis, better than the one already on it.

Are you testing it with DVB-C or DVB-T (or with both)? Here, DVB-C works properly on HVR-930C.

Quoted 5 lines

So things that would be nice to have is:

A log output that the drxk actually loaded the firmware file. Right now there is only log output when there is no firmware file detected. Maybe add a log that the card might work without the drxk firmware.
Silence the SCU_RESULT_INVPAR debug output by default or find out what is causing the error messages.

Feel free to submit a patch for drxk_hard.c.

Regards,
Mauro

Quoted 7 lines

MvH
Benjamin Larsson

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html