NAT question
Subsystems (2)
Can iptables do a network to network nat without having to write out a bunch of nat rules. In other words translate 192.168.198.0/24 to 172.16.10.0/24 without having to write out 256 rules.
Also can iptables handle 1000 nat rules like above if they have to be written out on a 1.66ghz intel dual core atom with 1gb of mem.
I know this isn't appropriate question for devel list but I didn't find anything googling.
Thanks,
Signature · 5 lines
"They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety." (Ben Franklin) "The course of history shows that as a government grows, liberty decreases." (Thomas Jefferson)
Quoted 6 lines · Stephen Clark
Can iptables do a network to network nat without having to write out a bunch of nat rules.
In other words translate 192.168.198.0/24 to 172.16.10.0/24 without having to write out
256 rules.
Maybe the NETMAP target is the right thing for you.
Signature · 2 lines
Thanks, //richard
Quoted 6 lines · Stephen Clark
Can iptables do a network to network nat without having to write out a bunch of nat rules.
In other words translate 192.168.198.0/24 to 172.16.10.0/24 without having to write out
256 rules.
Quoted 9 lines
Also can iptables handle 1000 nat rules like above if they have to be written out on
a 1.66ghz intel dual core atom with 1gb of mem.I know this isn't appropriate question for devel list but I didn't find anything googling.
Thanks,
If you are forced to use 256 rules, you could split them into 16 tables of 16 rules and do a hash split.
Since these rules are run only for new connections, it might be OK performance wise, depending on rate of connection establishment.
If not, you can try NETMAP :)
# iptables -t nat -A POSTROUTING -s 192.168.198.0/24 -j NETMAP --to 172.16.10.0/24
# iptables -t nat -nvL POSTROUTING
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 NETMAP all -- * * 192.168.198.0/24 0.0.0.0/0 172.16.10.0/24Quoted 24 lines · Eric Dumazet
Quoted 6 lines · Stephen Clark
Can iptables do a network to network nat without having to write out a bunch of nat rules.
In other words translate 192.168.198.0/24 to 172.16.10.0/24 without having to write out
256 rules.Quoted 10 lines
Also can iptables handle 1000 nat rules like above if they have to be written out on
a 1.66ghz intel dual core atom with 1gb of mem.I know this isn't appropriate question for devel list but I didn't find anything googling.
Thanks,
If you are forced to use 256 rules, you could split them into 16 tables of 16 rules and do a hash split.
Since these rules are run only for new connections, it might be OK performance wise, depending on rate of connection establishment.
Quoted 10 lines
If not, you can try NETMAP :)
# iptables -t nat -A POSTROUTING -s 192.168.198.0/24 -j NETMAP --to 172.16.10.0/24# iptables -t nat -nvL POSTROUTING Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 NETMAP all -- * * 192.168.198.0/24 0.0.0.0/0 172.16.10.0/24
Thanks Eric,
I assume I need an additional rule like this to translate in the other direction? iptables -t nat -A POSTROUTING -s 172.16.10.0/24 -j NETMAP --to 198.168.198.0/24
iptables -t nat -nvL POSTROUTING
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
15 2535 NETMAP all -- * * 192.168.198.0/24
0.0.0.0/0 172.16.10.0/24
0 0 NETMAP all -- * * 172.16.10.0/24
0.0.0.0/0 198.168.198.0/24
Also now that I am clued to NETMAP I found this example:
iptables -t mangle -A PREROUTING -s 192.168.1.0/24 -j NETMAP --to 10.5.6.0/24
using mangle and PREROUTING - does it matter?
"They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety." (Ben Franklin)
"The course of history shows that as a government grows, liberty decreases." (Thomas Jefferson)