lsscsi 0.26 beta 2, add --wwn
lsscsi currently can provide some transport related WWN information when the --transport (-t) option is used. This will probably be a target port name rather than a LU name.
Fetching the LU name has proven elusive. The most direct way would be to issue an INQUIRY to get the device identification VPD page but that would require root permissions. A feature of lsscsi is that it doesn't need root permissions (or related tricks).
This beta adds a --wwn (-w) option which searches the udev provided /dev/disk/by-id/wwn-* symlinks. This will find WWNs (LU names) for disks if udev can find them.
If there is no averse feedback version 0.26 will be released in a few weeks.
There are two SATA disks in the example below: /dev/sda and /dev/sdd . /dev/sda has no WWN and is directly connected to a SATA controller on the motherboard. /dev/sdd has a WNN and is connected via a SAS expander.
# lsscsi [1:0:0:0] disk ATA ST3320620AS 3.AA /dev/sda [6:0:0:0] enclosu Intel RES2SV240 0600 - [6:0:1:0] disk SEAGATE ST33000650SS 0002 /dev/sdb [6:0:2:0] disk SEAGATE ST32000444SS 0006 /dev/sdc [6:0:3:0] disk ATA ST3500418AS CC34 /dev/sdd
# lsscsi -w [1:0:0:0] disk /dev/sda [6:0:0:0] enclosu - [6:0:1:0] disk 0x5000c50033fe58db /dev/sdb [6:0:2:0] disk 0x5000c500215725bf /dev/sdc [6:0:3:0] disk 0x5000c500120bfe84 /dev/sdd
# lsscsi -t [1:0:0:0] disk sata: /dev/sda [6:0:0:0] enclosu sas:0x5001517e85c3effd - [6:0:1:0] disk sas:0x5000c50033fe58d9 /dev/sdb [6:0:2:0] disk sas:0x5000c500215725bd /dev/sdc [6:0:3:0] disk sas:0x5001517e85c3efe2 /dev/sdd
Version 0.26 beta 2 is available at:
http://sg.danny.cz/scsi/lsscsi.html
More information can be found on that page including examples and a Download section for the tarball:
http://sg.danny.cz/scsi/lsscsi-0.26b2.tgz
There are no debian or redhat packages built for this beta.
Version 0.26 2012/01/31 [svn: r97]
- add 'fcoe' transport indicator
- add '--wwn' option, datamine /dev/disk/by-id/wwn*
- move lsscsi.c into src directory
Version 0.25 2011/05/09 [svn: r92]
...
Doug Gilbert