Skip to contentSkip to conversation

needed site is down???

DISCUSSION jfabernathy 5 participants 11 messages Feb 2, 2012

lore
Share & tools
lore
#1 lore raw
Quoted 8 lines · jfabernathy

Am I the only one seeing this dead link? I'm building from master and can't get to this link that draws the error:

http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2

I'm building crownbay bsp with core-image-sato.

Jim A

I can't seem to build anything that requires something from cgit.freedesktop.org. The whole site seems to be down. Is there a mirror?

JIm A

#2 lore raw
Quoted 4 lines · jfabernathy
Quoted 3 lines · jfabernathy

Am I the only one seeing this dead link? I'm building from master and can't get to this link that draws the error:

Quoted 8 lines
Quoted 6 lines

http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2

I'm building crownbay bsp with core-image-sato.

Jim A

I can't seem to build anything that requires something from cgit.freedesktop.org. The whole site seems to be down. Is there a mirror?

Using the standard poky distribution configuration, you should be connecting to our mirrors.

meta-yocto/conf/distro/poky.conf has the settings. All of the upstream packages should be mirrored there. If they are not, then please let us know and we'll work on resolving any missing files.

--Mark

Quoted 6 lines

JIm A

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw
Quoted 11 lines · Mark Hatle
Quoted 10 lines · jfabernathy
Quoted 9 lines · jfabernathy

Am I the only one seeing this dead link? I'm building from master and can't get to this link that draws the error:

http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2

I'm building crownbay bsp with core-image-sato.

Jim A

Quoted 9 lines
Quoted 2 lines

I can't seem to build anything that requires something from cgit.freedesktop.org. The whole site seems to be down. Is there a mirror?

Using the standard poky distribution configuration, you should be connecting to our mirrors.

meta-yocto/conf/distro/poky.conf has the settings. All of the upstream packages should be mirrored there. If they are not, then please let us know and we'll work on resolving any missing files.

--Mark

In the poky.conf file you mentioned, I see the statement in the mirror section:

http://.*/.* http://autobuilder.yoctoproject.org/sources/ \n \

I'm not sure if this statement will allow the yocto mirror site to pull the dead location:

http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2

Quoted 11 lines
Quoted 6 lines

JIm A

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#4 lore raw
Quoted 21 lines · jfabernathy
Quoted 11 lines · Mark Hatle
Quoted 10 lines · jfabernathy
Quoted 9 lines · jfabernathy

Am I the only one seeing this dead link? I'm building from master and can't get to this link that draws the error:

http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2

I'm building crownbay bsp with core-image-sato.

Jim A

Quoted 9 lines
Quoted 2 lines

I can't seem to build anything that requires something from cgit.freedesktop.org. The whole site seems to be down. Is there a mirror?

Using the standard poky distribution configuration, you should be connecting to our mirrors.

meta-yocto/conf/distro/poky.conf has the settings. All of the upstream packages should be mirrored there. If they are not, then please let us know and we'll work on resolving any missing files.

--Mark

Quoted 10 lines

In the poky.conf file you mentioned, I see the statement in the mirror section:

http://.*/.* http://autobuilder.yoctoproject.org/sources/ \n \

I'm not sure if this statement will allow the yocto mirror site to pull the dead location:

http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2

Quoted 3 lines
Quoted 3 lines

JIm A

_

Just noticed that what's on the Yocto mirror is libva_0.31.0-1+sds9.1ubuntu1.tar.gz ), but the recipe is calling for a newer version, libva-1.0.12.tar.bz2

Jim A

Quoted 10 lines
Quoted 9 lines
Quoted 4 lines

______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#5 lore raw
Quoted 8 lines · jfabernathy
Quoted 7 lines · jfabernathy
Quoted 6 lines · Mark Hatle
Quoted 5 lines · jfabernathy
Quoted 4 lines · jfabernathy

Am I the only one seeing this dead link? I'm building from master and can't get to this link that draws the error:

http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2

This is supposed to be a transient error but so far as I can see the fd.o cgit is still down.

Quoted 3 lines

Just noticed that what's on the Yocto mirror is libva_0.31.0-1+sds9.1ubuntu1.tar.gz ), but the recipe is calling for a newer version, libva-1.0.12.tar.bz2

I don't see libva-1.0.12 anywhere in poky or meta-yocto, the mirror is only updated once the autobuilder has seen the recipe and downloaded the object to mirror.

After a quick google I can't find a libva newer than 0.32.0+1sds2 - where did you get your libva recipe from?

Cheers,
Joshua

Signature · 3 lines
Joshua Lock
        Yocto Project "Johannes factotum"
        Intel Open Source Technology Centre
#6 lore raw
Quoted 27 lines · Joshua Lock
Quoted 6 lines · jfabernathy
Quoted 4 lines · jfabernathy
Quoted 2 lines · Mark Hatle

On 2/2/12 10:08 AM, jfabernathy wrote:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines · jfabernathy
Quoted 6 lines

Am I the only one seeing this dead link? I'm building from master and can't get to this link that draws the error:

http://cgit.freedesktop.org/**libva/snapshot/libva-1.0.12.**tar.bz2<http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2>

This is supposed to be a transient error but so far as I can see the fd.o cgit is still down.

Just noticed that what's on the Yocto mirror is

Quoted 3 lines

libva_0.31.0-1+sds9.1ubuntu1.**tar.gz ), but the recipe is calling for a newer version, libva-1.0.12.tar.bz2

Quoted 8 lines

I don't see libva-1.0.12 anywhere in poky or meta-yocto, the mirror is only updated once the autobuilder has seen the recipe and downloaded the object to mirror.

After a quick google I can't find a libva newer than 0.32.0+1sds2 - where did you get your libva recipe from?

If I checkout master on poky and meta-intel and run the normal crownbay (not the no-EMGD version) I get this error. Also on 1.2_M2 tag.

JIm A

Quoted 12 lines

Cheers,
Joshua
--
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology Centre

______________________________**_________________
yocto mailing list
[email protected]
https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>

#7 lore raw
Quoted 37 lines · James Abernathy

On Thu, Feb 2, 2012 at 2:11 PM, Joshua Lock <[email protected] <mailto:[email protected]>> wrote:

On 02/02/12 09:44, jfabernathy wrote:

On 02/02/2012 12:36 PM, jfabernathy wrote:

On 02/02/2012 12:06 PM, Mark Hatle wrote:

On 2/2/12 10:08 AM, jfabernathy wrote:

On 02/01/2012 10:59 PM, jfabernathy wrote:

Am I the only one seeing this dead link? I'm building from master and
can't get to this link that draws the error:

http://cgit.freedesktop.org/__libva/snapshot/libva-1.0.12.__tar.bz2
<http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2>

This is supposed to be a transient error but so far as I can see the fd.o cgit is still down.

Just noticed that what's on the Yocto mirror is libva_0.31.0-1+sds9.1ubuntu1.__tar.gz ), but the recipe is calling for a
newer version, libva-1.0.12.tar.bz2

I don't see libva-1.0.12 anywhere in poky or meta-yocto, the mirror is only updated once the autobuilder has seen the recipe and downloaded the object to mirror.

Quoted 6 lines

After a quick google I can't find a libva newer than 0.32.0+1sds2 - where did you get your libva recipe from?

If I checkout master on poky and meta-intel and run the normal crownbay (not the no-EMGD version) I get this error. Also on 1.2_M2 tag. JIm A

Whoops, I wasn't looking in the common directory - sorry about that.
That version of the Libya recipe has existed since November 26th, we really should be mirroring that.

Beth, are we updating the mirrors with packages fetched during builds of BSP's?

Sadly, (so far as I can tell) it looks like libva stopped hosting tarball releases and rely only on the snapshot functionality of git to supply tarballs. Which is fine until something like this happens.

If you can find a tarball of libva-1.0.12 from a source you trust you can download it and dump it in your DL_DIR to proceed your build.

Cheers,
Joshua

Signature · 3 lines
Joshua Lock
        Yocto Project "Johannes factotum"
        Intel Open Source Technology Centre
#8 lore raw
Quoted 52 lines · Joshua Lock
Quoted 37 lines · James Abernathy

On Thu, Feb 2, 2012 at 2:11 PM, Joshua Lock <[email protected] <mailto:[email protected]>> wrote:

On 02/02/12 09:44, jfabernathy wrote:

On 02/02/2012 12:36 PM, jfabernathy wrote:

On 02/02/2012 12:06 PM, Mark Hatle wrote:

On 2/2/12 10:08 AM, jfabernathy wrote:

On 02/01/2012 10:59 PM, jfabernathy wrote:

Am I the only one seeing this dead link? I'm building from master and
can't get to this link that draws the error:

http://cgit.freedesktop.org/__libva/snapshot/libva-1.0.12.__tar.bz2
<http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2>

This is supposed to be a transient error but so far as I can see the fd.o cgit is still down.

Just noticed that what's on the Yocto mirror is libva_0.31.0-1+sds9.1ubuntu1.__tar.gz ), but the recipe is calling for a
newer version, libva-1.0.12.tar.bz2

I don't see libva-1.0.12 anywhere in poky or meta-yocto, the mirror is only updated once the autobuilder has seen the recipe and downloaded the object to mirror.

Quoted 6 lines

After a quick google I can't find a libva newer than 0.32.0+1sds2 - where did you get your libva recipe from?

If I checkout master on poky and meta-intel and run the normal crownbay (not the no-EMGD version) I get this error. Also on 1.2_M2 tag. JIm A

Whoops, I wasn't looking in the common directory - sorry about that. That version of the Libya recipe has existed since November 26th, we really should be mirroring that.

Beth, are we updating the mirrors with packages fetched during builds of BSP's?

Quoted 7 lines

Sadly, (so far as I can tell) it looks like libva stopped hosting tarball releases and rely only on the snapshot functionality of git to supply tarballs. Which is fine until something like this happens.

If you can find a tarball of libva-1.0.12 from a source you trust you can download it and dump it in your DL_DIR to proceed your build.

I've sent Jim the tarball from my local DL_DIR.

This has been around since November so it should be in the mirror.

Tom

Quoted 2 lines

Cheers,
Joshua

#9 lore raw
In reply to Joshua Lock
Quoted 46 lines · Joshua Lock
Quoted 38 lines · James Abernathy

On Thu, Feb 2, 2012 at 2:11 PM, Joshua Lock <[email protected] <mailto:[email protected]>> wrote:

    On 02/02/12 09:44, jfabernathy wrote:

        On 02/02/2012 12:36 PM, jfabernathy wrote:

            On 02/02/2012 12:06 PM, Mark Hatle wrote:

                On 2/2/12 10:08 AM, jfabernathy wrote:

                    On 02/01/2012 10:59 PM, jfabernathy wrote:

                        Am I the only one seeing this dead link? I'm
                        building from master and
                        can't get to this link that draws the error:

http://cgit.freedesktop.org/__libva/snapshot/libva-1.0.12.__tar.bz2
<http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2>

This is supposed to be a transient error but so far as I can see the fd.o cgit is still down.

Just noticed that what's on the Yocto mirror is libva_0.31.0-1+sds9.1ubuntu1.__tar.gz ), but the recipe is calling for a
newer version, libva-1.0.12.tar.bz2

I don't see libva-1.0.12 anywhere in poky or meta-yocto, the mirror is only updated once the autobuilder has seen the recipe and downloaded the object to mirror.

Quoted 6 lines

After a quick google I can't find a libva newer than 0.32.0+1sds2 - where did you get your libva recipe from?

If I checkout master on poky and meta-intel and run the normal crownbay (not the no-EMGD version) I get this error. Also on 1.2_M2 tag. JIm A

Quoted 8 lines

Whoops, I wasn't looking in the common directory - sorry about that.
That version of the Libya recipe has existed since November 26th, we really should be mirroring that.

Beth, are we updating the mirrors with packages fetched during builds of BSP's?

Sadly, (so far as I can tell) it looks like libva stopped hosting tarball releases and rely only on the snapshot functionality of git to supply tarballs. Which is fine until something like this happens.

If you can find a tarball of libva-1.0.12 from a source you trust you can download it and dump it in your DL_DIR to proceed your build.

I found a file called libva_1.0.12.orig.tar.bz2 on an Ubuntu related site. it has the same MD5SUM as the yocto recipe, so it's probably the exact same file. I'll just rename it.

But it sounds like we have something to fix anyway.

JIm A

Quoted 3 lines

Cheers,
Joshua

#10 lore raw
In reply to Joshua Lock
Quoted 51 lines · Joshua Lock
Quoted 42 lines · James Abernathy

On Thu, Feb 2, 2012 at 2:11 PM, Joshua Lock <[email protected] <mailto:[email protected]>> wrote:

   On 02/02/12 09:44, jfabernathy wrote:

       On 02/02/2012 12:36 PM, jfabernathy wrote:

           On 02/02/2012 12:06 PM, Mark Hatle wrote:

               On 2/2/12 10:08 AM, jfabernathy wrote:

                   On 02/01/2012 10:59 PM, jfabernathy wrote:

                       Am I the only one seeing this dead link? I'm building from master and
                       can't get to this link that draws the error:

 http://cgit.freedesktop.org/__libva/snapshot/libva-1.0.12.__tar.bz2

 <http://cgit.freedesktop.org/libva/snapshot/libva-1.0.12.tar.bz2>

   This is supposed to be a transient error but so far as I can see the fd.o cgit is still down.

       Just noticed that what's on the Yocto mirror is libva_0.31.0-1+sds9.1ubuntu1.__tar.gz ), but the recipe is

       calling for a
       newer version, libva-1.0.12.tar.bz2

   I don't see libva-1.0.12 anywhere in poky or meta-yocto, the mirror is only updated once the autobuilder has seen the recipe and downloaded the object to mirror.

Quoted 6 lines

   After a quick google I can't find a libva newer than 0.32.0+1sds2 - where did you get your libva recipe from?

If I checkout master on poky and meta-intel and run the normal crownbay (not the no-EMGD version) I get this error. Also on 1.2_M2 tag. JIm A

Quoted 6 lines

Whoops, I wasn't looking in the common directory - sorry about that. That version of the Libya recipe has existed since November 26th, we really should be mirroring that.

Beth, are we updating the mirrors with packages fetched during builds of BSP's?

For meta-intel BSPs, the source mirror is internal to the Intel autobuilder at the moment. James, if you could open a bug up on this. I have a few ideas on how to fix it from a process standpoint but I want to think about it a bit and don't want this to get lost in the shuffle.

Quoted 3 lines

Sadly, (so far as I can tell) it looks like libva stopped hosting tarball releases and rely only on the snapshot functionality of git to supply tarballs. Which is fine until something like this happens.

I've sync'd libva* up to the source mirror from our internal, James should be good now.

Quoted 11 lines

If you can find a tarball of libva-1.0.12 from a source you trust you can download it and dump it in your DL_DIR to proceed your build.

Cheers,
Joshua
--
Joshua Lock
       Yocto Project "Johannes factotum"
       Intel Open Source Technology Centre

Signature · 3 lines
Elizabeth Flanagan
Yocto Project
Build and Release