checkpatch complaint
checkpatch complains on code below and I must overlook something or checkpatch gives a false negative/positive/whatever:
#define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) #define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) #define IFDESC(usb, idx) IFALTS((usb), (idx)).desc #define IFEPDESC(usb, idx, ep) \ (IFALTS((usb), (idx)).endpoint[(ep)]).desc
checkpatch errors:
ERROR: Macros with complex values should be enclosed in parenthesis #169: FILE: drivers/net/wireless/brcm80211/brcmfmac/usb.c:58:
+#define IFDESC(usb, idx) (IFALTS((usb), (idx))).desc
ERROR: Macros with complex values should be enclosed in parenthesis #170: FILE: drivers/net/wireless/brcm80211/brcmfmac/usb.c:59:
+#define IFEPDESC(usb, idx, ep) ((IFALTS((usb), (idx))).endpoint[(ep)]).desc
Any ideas? I tried extra parenthesis around IFALTS but that does not resolve it.
Gr. AvS
Quoted 14 lines · Arend van Spriel
checkpatch complains on code below and I must overlook something or checkpatch gives a false negative/positive/whatever:
#define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) #define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) #define IFDESC(usb, idx) IFALTS((usb), (idx)).desc #define IFEPDESC(usb, idx, ep) \ (IFALTS((usb), (idx)).endpoint[(ep)]).desccheckpatch errors:
ERROR: Macros with complex values should be enclosed in parenthesis #169: FILE:drivers/net/wireless/brcm80211/brcmfmac/usb.c:58:
+#defineIFDESC(usb, idx)(IFALTS((usb), (idx))).desc
Quoted 7 lines
ERROR: Macros with complex values should be enclosed in parenthesis #170: FILE:
drivers/net/wireless/brcm80211/brcmfmac/usb.c:59:
+#defineIFEPDESC(usb, idx, ep)((IFALTS((usb), (idx))).endpoint[(ep)]).descAny ideas? I tried extra parenthesis around IFALTS but that does not resolve it.
I think the entries should be surround by ()
I think it's reasonable too.
I tried:
$ cat cp.c #define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) #define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) #define IFDESC(usb, idx) (IFALTS((usb), (idx)).desc) #define IFEPDESC(usb, idx, ep) ((IFALTS((usb), (idx)).endpoint[(ep)]).desc)
$ ./scripts/checkpatch.pl -f cp.c total: 0 errors, 0 warnings, 5 lines checked
cp.c has no obvious style problems and is ready for submission.
Quoted 34 lines · Joe Perches
Quoted 14 lines · Arend van Spriel
checkpatch complains on code below and I must overlook something or checkpatch gives a false negative/positive/whatever:
#define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) #define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) #define IFDESC(usb, idx) IFALTS((usb), (idx)).desc #define IFEPDESC(usb, idx, ep) \ (IFALTS((usb), (idx)).endpoint[(ep)]).desccheckpatch errors:
ERROR: Macros with complex values should be enclosed in parenthesis #169: FILE:drivers/net/wireless/brcm80211/brcmfmac/usb.c:58:
+#defineIFDESC(usb, idx)(IFALTS((usb), (idx))).descQuoted 7 lines
ERROR: Macros with complex values should be enclosed in parenthesis #170: FILE:
drivers/net/wireless/brcm80211/brcmfmac/usb.c:59:
+#defineIFEPDESC(usb, idx, ep)((IFALTS((usb), (idx))).endpoint[(ep)]).descAny ideas? I tried extra parenthesis around IFALTS but that does not resolve it.
I think the entries should be surround by ()
I think it's reasonable too.I tried:
$ cat cp.c #define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) #define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) #define IFDESC(usb, idx) (IFALTS((usb), (idx)).desc) #define IFEPDESC(usb, idx, ep) ((IFALTS((usb), (idx)).endpoint[(ep)]).desc)
Quoted 5 lines
$ ./scripts/checkpatch.pl -f cp.c total: 0 errors, 0 warnings, 5 lines checked
cp.chas no obvious style problems and is ready for submission.
Hi Joe,
different example, same message:
ERROR: Macros with complex values should be enclosed in parenthesis #339: FILE: hwmon/ltc4245.c:339:
+#define LTC4245_ALARM(name, mask, reg) \
+ static SENSOR_DEVICE_ATTR_2(name, S_IRUGO, \
+ ltc4245_show_alarm, NULL, (mask), reg)
and:
ERROR: Macros with complex values should be enclosed in parenthesis #585: FILE: hwmon/pc87360.c:585:
+#define VIN_UNIT_ATTRS(X) \
+ &in_input[X].dev_attr.attr, \ + &in_status[X].dev_attr.attr, \ + &in_min[X].dev_attr.attr, \ + &in_max[X].dev_attr.attr, \ + &in_min_alarm[X].dev_attr.attr, \ + &in_max_alarm[X].dev_attr.attr
and:
ERROR: Macros with multiple statements should be enclosed in a do - while loop #291: FILE: hwmon/sis5595.c:291:
+#define show_in_offset(offset) \ +static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset);
Those are all pretty common in the hwmon subsystem and all quite annnoying. Other than labeling them as "false positive", I have no idea what to do about it. Sure, we could replace all the macros with immediate code, but that doesn't sound very compelling. If you have an idea, please let me know.
Thanks,
Guenter
Quoted 16 lines · Guenter Roeck
Quoted 15 lines · Joe Perches
Quoted 14 lines · Arend van Spriel
checkpatch complains on code below and I must overlook something or checkpatch gives a false negative/positive/whatever:
#define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) #define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) #define IFDESC(usb, idx) IFALTS((usb), (idx)).desc #define IFEPDESC(usb, idx, ep) \ (IFALTS((usb), (idx)).endpoint[(ep)]).desccheckpatch errors:
ERROR: Macros with complex values should be enclosed in parenthesis #169: FILE:drivers/net/wireless/brcm80211/brcmfmac/usb.c:58:
+#defineIFDESC(usb, idx)(IFALTS((usb), (idx))).desc
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
ERROR: Macros with complex values should be enclosed in parenthesis #170: FILE:
drivers/net/wireless/brcm80211/brcmfmac/usb.c:59:
+#defineIFEPDESC(usb, idx, ep)((IFALTS((usb), (idx))).endpoint[(ep)]).descAny ideas? I tried extra parenthesis around IFALTS but that does not resolve it.
You probably did it wrong. Sent the next time what you *really* did and not only description .....
Quoted 22 lines
Quoted 11 lines
I think the entries should be surround by ()
I think it's reasonable too.I tried:
$ cat cp.c #define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) #define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) #define IFDESC(usb, idx) (IFALTS((usb), (idx)).desc) #define IFEPDESC(usb, idx, ep) ((IFALTS((usb), (idx)).endpoint[(ep)]).desc)Quoted 5 lines
$ ./scripts/checkpatch.pl -f cp.c total: 0 errors, 0 warnings, 5 lines checked
cp.chas no obvious style problems and is ready for submission.Hi Joe,
different example, same message:
ERROR: Macros with complex values should be enclosed in parenthesis #339: FILE:
hwmon/ltc4245.c:339:
Review
Quoted 3 lines
(quoted diff) +3
-0+#define LTC4245_ALARM(name, mask, reg) \ + static SENSOR_DEVICE_ATTR_2(name, S_IRUGO, \ + ltc4245_show_alarm, NULL, (mask), reg)
*eg* Make it one (long) line. IMHO this is a prototype example to ignore the 80-column limit.
I haven't looked the the reg-exps (or the code in checkpatch) but either make checkpatch recognize the "\" at the end of lines and merge the lines before doing these checks (since they apparently assume that the complete macro definition is on one line) or allow "\\\n" within the reg-exps.
Quoted 11 lines
and:
ERROR: Macros with complex values should be enclosed in parenthesis #585: FILE:
hwmon/pc87360.c:585:(quoted diff) +7
-0+#define VIN_UNIT_ATTRS(X) \ + &in_input[X].dev_attr.attr, \ + &in_status[X].dev_attr.attr, \ + &in_min[X].dev_attr.attr, \ + &in_max[X].dev_attr.attr, \ + &in_min_alarm[X].dev_attr.attr, \ + &in_max_alarm[X].dev_attr.attr
[...]
Quoted 3 lines
Other than labeling them as "false positive", I have no idea what to do about it. Sure, we could replace all the macros with immediate code, but that doesn't sound very compelling. If you have an idea, please let me know.
Given that the above gives after the preprocessor the desired results:
Add special comments (like indent allows to disable it temporarily) so that checkpatch doesn't complain about these macros.
Yes, that can be abused but review should catch that. And newbies won't see false positives.
Listing the to-be-ignored #define's in checkpatch (or some external file) or enhancing it with some "known false positives, do not emit *that* warning there" is also a maintenance burden (hmm, how often do they change?).
Bernd
Signature · 2 lines
Bernd Petrovitsch Email : [email protected] LUGA : http://www.luga.at
Quoted 20 lines · Joe Perches
Quoted 19 lines · Arend van Spriel
checkpatch complains on code below and I must overlook something or checkpatch gives a false negative/positive/whatever:
#define IFPTR(usb, idx) ((usb)->actconfig->interface[(idx)]) #define IFALTS(usb, idx) (IFPTR((usb), (idx))->altsetting[0]) #define IFDESC(usb, idx) IFALTS((usb), (idx)).desc #define IFEPDESC(usb, idx, ep) \ (IFALTS((usb), (idx)).endpoint[(ep)]).desccheckpatch errors:
ERROR: Macros with complex values should be enclosed in parenthesis #169: FILE:drivers/net/wireless/brcm80211/brcmfmac/usb.c:58:
+#defineIFDESC(usb, idx)(IFALTS((usb), (idx))).descERROR: Macros with complex values should be enclosed in parenthesis #170: FILE:
drivers/net/wireless/brcm80211/brcmfmac/usb.c:59:
+#defineIFEPDESC(usb, idx, ep)((IFALTS((usb), (idx))).endpoint[(ep)]).desc
Quoted 6 lines
Quoted 2 lines
Any ideas? I tried extra parenthesis around IFALTS but that does not resolve it.
I think the entries should be surround by ()
I think it's reasonable too.
No. That's not reasonable. The other code is:
A) perfectly fine
B) nicer to look at
We already have newbies running checkpatch.pl -f against the kernel source and sending bogus patches that make the code uglier. I've tried to fight back against checkpatch patches before where they make the code worse, but it's just overwhelming. I don't like to be the bad guy to tell newbies that they are sending bad patches when actually the Official Kernel Checkpatch tool said they should send it. We're causing everyone pain for no reason.
regards,
dan carpenter