Error when mounting ubi image
Dear mailing-list,
I am still facing some trouble with UBI and UBIFS. I am working on an OMAP4 processor with a 3.0.21 kernel and a Micron MT29F4G08ABBDAH4 1GB NAND Flash.
I generate the ubi image of my rootfs using the following command:
mkfs.ubifs -r my_rootfs -o my_image.ubifs -m 2048 -e 129024 -c 4060 ubinize -o my_rootfs.ubi -m 2048 -p 128KiB -s 512 ubinize.cfg
And the following ubinize.cfg file:
[ubifs]
mode=ubi
image=my_image.ubifs
vol_id=0
vol_type=static
vol_name=my_rootfs
Then I flash this image and mount it with the following commands:
ubiformat /dev/mtd4 -f my_rootfs.ubi
ubiattach -p /dev/mtd4
mount -t ubifs ubi0_0 /media/test/
I then have the following error:
mount: block device ubi0_0 is write-protected, mounting read-only
And from the kernel (dmesg):
UBI warning: ubi_eba_read_leb: CRC error: calculated 0x34afeca5, must be 0x74215933 UBI warning: ubi_open_volume: volume 0 on UBI device 0 is corrupted
UBIFS warning (pid 226): init_constants_early: UBI volume is corrupted - read-only mode
UBIFS: static UBI volume - read-only mode
UBIFS error (pid 226): mount_ubifs: cannot mount read-write - read-only media UBIFS warning (pid 226): init_constants_early: UBI volume is corrupted - read-only mode
UBIFS: static UBI volume - read-only mode
UBIFS: mounted UBI device 0, volume 0, name "my_rootfs"
UBIFS: mounted read-only
UBIFS: file system size: 42190848 bytes (41202 KiB, 40 MiB, 327 LEBs)
UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
I couldn't find what I am doing wrong. Any help will be really appreciated !
Thanks in advance
Patrick
Quoted 54 lines · Patrick
Dear mailing-list,
I am still facing some trouble with UBI and UBIFS. I am working on an OMAP4 processor with a 3.0.21 kernel and a Micron MT29F4G08ABBDAH4 1GB NAND Flash.
I generate the ubi image of my rootfs using the following command:
mkfs.ubifs -r
my_rootfs-o my_image.ubifs -m 2048 -e 129024 -c 4060 ubinize -o my_rootfs.ubi -m 2048 -p 128KiB -s 512 ubinize.cfgAnd the following ubinize.cfg file:
[ubifs]
mode=ubi
image=my_image.ubifs
vol_id=0
vol_type=static
vol_name=my_rootfsThen I flash this image and mount it with the following commands:
ubiformat
/dev/mtd4-f my_rootfs.ubi
ubiattach -p/dev/mtd4
mount -t ubifsubi0_0/media/test/I then have the following error:
mount: block device
ubi0_0is write-protected, mounting read-onlyAnd from the kernel (dmesg):
UBI warning:
ubi_eba_read_leb: CRC error: calculated0x34afeca5, must be0x74215933
UBI warning:ubi_open_volume: volume 0 on UBI device 0 is corrupted UBIFS warning (pid 226):init_constants_early: UBI volume is corrupted - read-only mode
UBIFS: static UBI volume - read-only mode
UBIFS error (pid 226):mount_ubifs: cannot mount read-write - read-only media
UBIFS warning (pid 226):init_constants_early: UBI volume is corrupted - read-only mode
UBIFS: static UBI volume - read-only mode
UBIFS: mounted UBI device 0, volume 0, name "my_rootfs"
UBIFS: mounted read-only
UBIFS: file system size: 42190848 bytes (41202 KiB, 40 MiB, 327 LEBs)
UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)I couldn't find what I am doing wrong. Any help will be really appreciated !
Quoted 7 lines
Thanks in advance
Patrick
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
I reply myself to add some informations:
I have tried to add the following flags to the ubinize.cfg:
vol_type=dynamic
vol_flags=autoresize
With those flags I could mount the image successfully. But when I detach the volume an reattach it I have some ECC errors:
ubiattach -p /dev/mtd4
UBI device number 0, total 4057 LEBs (523450368 bytes, 499.2 MiB), available 3371 LEBs (434939904 bytes, 414.8 MiB), LEB size 129024 bytes (126.0 KiB)
mount -t ubifs ubi0_0 /media/card/
ls /media/card
...
umount /media/card
ubidetach -p /dev/mtd4
ubiattach -p /dev/mtd4
I have the following error message in the kernel debug and then it start an infinite error loop.
UBI: attaching mtd4 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned 512)
UBI: data offset: 2048
UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 605:0, read 64 bytes UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 605:512, read 512 bytes UBI warning: process_eb: valid VID header but corrupted EC header at PEB 605
UBI: max. sequence number: 2
UBI: attached mtd4 to ubi0
UBI: MTD device name: "root"
UBI: MTD device size: 507 MiB
UBI: number of good PEBs: 4057
UBI: number of bad PEBs: 3
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 3371
UBI: total number of reserved PEBs: 686
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 4/2
UBI: image sequence number: 218161718
Again any help would be really appreciated.
Patrick
Quoted 5 lines · Patrick
UBI: data offset: 2048
UBI error:ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 605:0, read 64 bytes
UBI error:ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 605:512, read 512 bytes
I think your MTD driver is buggy - it fails to do sub-page I/O but reports that it supports sub-pages. Either fix sub-pages support or do not use them. You can find a lot if info about sub-pages in the MTD web site. Also, it is a good idea to run the MTD tests, just like it is suggested here:
http://www.linux-mtd.infradead.org/faq/ubifs.html#L_how_send_bugreport
Signature · 2 lines
Best Regards, Artem Bityutskiy